@@ -1903,16 +1903,17 @@ static ssize_t check_direct_IO(struct btrfs_fs_info *fs_info,
static ssize_t btrfs_direct_write(struct kiocb *iocb, struct iov_iter *from)
{
+ const bool is_sync_write = (iocb->ki_flags & IOCB_DSYNC);
struct file *file = iocb->ki_filp;
struct inode *inode = file_inode(file);
struct btrfs_fs_info *fs_info = btrfs_sb(inode->i_sb);
loff_t pos;
ssize_t written = 0;
ssize_t written_buffered;
+ size_t prev_left = 0;
loff_t endbyte;
ssize_t err;
unsigned int ilock_flags = 0;
- struct iomap_dio *dio = NULL;
if (iocb->ki_flags & IOCB_NOWAIT)
ilock_flags |= BTRFS_ILOCK_TRY;
@@ -1955,23 +1956,80 @@ static ssize_t btrfs_direct_write(struct kiocb *iocb, struct iov_iter *from)
goto buffered;
}
- dio = __iomap_dio_rw(iocb, from, &btrfs_dio_iomap_ops, &btrfs_dio_ops,
- 0, 0);
+ /*
+ * We remove IOCB_DSYNC so that we don't deadlock when iomap_dio_rw()
+ * calls generic_write_sync() (through iomap_dio_complete()), because
+ * that results in calling fsync (btrfs_sync_file()) which will try to
+ * lock the inode in exclusive/write mode.
+ */
+ if (is_sync_write)
+ iocb->ki_flags &= ~IOCB_DSYNC;
- btrfs_inode_unlock(inode, ilock_flags);
+ /*
+ * The iov_iter can be mapped to the same file range we are writing to.
+ * If that's the case, then we will deadlock in the iomap code, because
+ * it first calls our callback btrfs_dio_iomap_begin(), which will create
+ * an ordered extent, and after that it will fault in the pages that the
+ * iov_iter refers to. During the fault in we end up in the readahead
+ * pages code (starting at btrfs_readahead()), which will lock the range,
+ * find that ordered extent and then wait for it to complete (at
+ * btrfs_lock_and_flush_ordered_range()), resulting in a deadlock since
+ * obviously the ordered extent can never complete as we didn't submit
+ * yet the respective bio(s). This always happens when the buffer is
+ * memory mapped to the same file range, since the iomap DIO code always
+ * invalidates pages in the target file range (after starting and waiting
+ * for any writeback).
+ *
+ * So here we disable page faults in the iov_iter and then retry if we
+ * got -EFAULT, faulting in the pages before the retry.
+ */
+again:
+ from->nofault = true;
+ err = iomap_dio_rw(iocb, from, &btrfs_dio_iomap_ops, &btrfs_dio_ops,
+ IOMAP_DIO_PARTIAL, written);
+ from->nofault = false;
- if (IS_ERR_OR_NULL(dio)) {
- err = PTR_ERR_OR_ZERO(dio);
- if (err < 0 && err != -ENOTBLK)
- goto out;
- } else {
- written = iomap_dio_complete(dio);
+ /* No increment (+=) because iomap returns a cumulative value. */
+ if (err > 0)
+ written = err;
+
+ if (iov_iter_count(from) > 0 && (err == -EFAULT || err > 0)) {
+ const size_t left = iov_iter_count(from);
+ /*
+ * We have more data left to write. Try to fault in as many as
+ * possible of the remainder pages and retry. We do this without
+ * releasing and locking again the inode, to prevent races with
+ * truncate.
+ *
+ * Also, in case the iov refers to pages in the file range of the
+ * file we want to write to (due to a mmap), we could enter an
+ * infinite loop if we retry after faulting the pages in, since
+ * iomap will invalidate any pages in the range early on, before
+ * it tries to fault in the pages of the iov. So we keep track of
+ * how much was left of iov in the previous EFAULT and fallback
+ * to buffered IO in case we haven't made any progress.
+ */
+ if (left == prev_left) {
+ err = -ENOTBLK;
+ } else {
+ fault_in_iov_iter_readable(from, left);
+ prev_left = left;
+ goto again;
+ }
}
- if (written < 0 || !iov_iter_count(from)) {
- err = written;
+ btrfs_inode_unlock(inode, ilock_flags);
+
+ /*
+ * Add back IOCB_DSYNC. Our caller, btrfs_file_write_iter(), will do
+ * the fsync (call generic_write_sync()).
+ */
+ if (is_sync_write)
+ iocb->ki_flags |= IOCB_DSYNC;
+
+ /* If 'err' is -ENOTBLK then it means we must fallback to buffered IO. */
+ if ((err < 0 && err != -ENOTBLK) || !iov_iter_count(from))
goto out;
- }
buffered:
pos = iocb->ki_pos;
@@ -1996,7 +2054,7 @@ static ssize_t btrfs_direct_write(struct kiocb *iocb, struct iov_iter *from)
invalidate_mapping_pages(file->f_mapping, pos >> PAGE_SHIFT,
endbyte >> PAGE_SHIFT);
out:
- return written ? written : err;
+ return err < 0 ? err : written;
}
static ssize_t btrfs_file_write_iter(struct kiocb *iocb,
@@ -3650,6 +3708,8 @@ static int check_direct_read(struct btrfs_fs_info *fs_info,
static ssize_t btrfs_direct_read(struct kiocb *iocb, struct iov_iter *to)
{
struct inode *inode = file_inode(iocb->ki_filp);
+ size_t prev_left = 0;
+ ssize_t read = 0;
ssize_t ret;
if (fsverity_active(inode))
@@ -3659,10 +3719,57 @@ static ssize_t btrfs_direct_read(struct kiocb *iocb, struct iov_iter *to)
return 0;
btrfs_inode_lock(inode, BTRFS_ILOCK_SHARED);
+again:
+ /*
+ * This is similar to what we do for direct IO writes, see the comment
+ * at btrfs_direct_write(), but we also disable page faults in addition
+ * to disabling them only at the iov_iter level. This is because when
+ * reading from a hole or prealloc extent, iomap calls iov_iter_zero(),
+ * which can still trigger page fault ins despite having set ->nofault
+ * to true of our 'to' iov_iter.
+ *
+ * The difference to direct IO writes is that we deadlock when trying
+ * to lock the extent range in the inode's tree during he page reads
+ * triggered by the fault in (while for writes it is due to waiting for
+ * our own ordered extent). This is because for direct IO reads,
+ * btrfs_dio_iomap_begin() returns with the extent range locked, which
+ * is only unlocked in the endio callback (end_bio_extent_readpage()).
+ */
+ pagefault_disable();
+ to->nofault = true;
ret = iomap_dio_rw(iocb, to, &btrfs_dio_iomap_ops, &btrfs_dio_ops,
- 0, 0);
+ IOMAP_DIO_PARTIAL, read);
+ to->nofault = false;
+ pagefault_enable();
+
+ /* No increment (+=) because iomap returns a cumulative value. */
+ if (ret > 0)
+ read = ret;
+
+ if (iov_iter_count(to) > 0 && (ret == -EFAULT || ret > 0)) {
+ const size_t left = iov_iter_count(to);
+
+ if (left == prev_left) {
+ /*
+ * We didn't make any progress since the last attempt,
+ * fallback to a buffered read for the remainder of the
+ * range. This is just to avoid any possibility of looping
+ * for too long.
+ */
+ ret = read;
+ } else {
+ /*
+ * We made some progress since the last retry or this is
+ * the first time we are retrying. Fault in as many pages
+ * as possible and retry.
+ */
+ fault_in_iov_iter_writeable(to, left);
+ prev_left = left;
+ goto again;
+ }
+ }
btrfs_inode_unlock(inode, BTRFS_ILOCK_SHARED);
- return ret;
+ return ret < 0 ? ret : read;
}
static ssize_t btrfs_file_read_iter(struct kiocb *iocb, struct iov_iter *to)