diff mbox series

[4.19,291/338] xen: delay xen_hvm_init_time_ops() if kdump is boot on vcpu>=32

Message ID 20220414110847.171515155@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg KH April 14, 2022, 1:13 p.m. UTC 
From: Dongli Zhang <dongli.zhang@oracle.com>

[ Upstream commit eed05744322da07dd7e419432dcedf3c2e017179 ]

The sched_clock() can be used very early since commit 857baa87b642
("sched/clock: Enable sched clock early"). In addition, with commit
38669ba205d1 ("x86/xen/time: Output xen sched_clock time from 0"), kdump
kernel in Xen HVM guest may panic at very early stage when accessing
&__this_cpu_read(xen_vcpu)->time as in below:

setup_arch()
 -> init_hypervisor_platform()
     -> x86_init.hyper.init_platform = xen_hvm_guest_init()
         -> xen_hvm_init_time_ops()
             -> xen_clocksource_read()
                 -> src = &__this_cpu_read(xen_vcpu)->time;

This is because Xen HVM supports at most MAX_VIRT_CPUS=32 'vcpu_info'
embedded inside 'shared_info' during early stage until xen_vcpu_setup() is
used to allocate/relocate 'vcpu_info' for boot cpu at arbitrary address.

However, when Xen HVM guest panic on vcpu >= 32, since
xen_vcpu_info_reset(0) would set per_cpu(xen_vcpu, cpu) = NULL when
vcpu >= 32, xen_clocksource_read() on vcpu >= 32 would panic.

This patch calls xen_hvm_init_time_ops() again later in
xen_hvm_smp_prepare_boot_cpu() after the 'vcpu_info' for boot vcpu is
registered when the boot vcpu is >= 32.

This issue can be reproduced on purpose via below command at the guest
side when kdump/kexec is enabled:

"taskset -c 33 echo c > /proc/sysrq-trigger"

The bugfix for PVM is not implemented due to the lack of testing
environment.

[boris: xen_hvm_init_time_ops() returns on errors instead of jumping to end]

Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20220302164032.14569-3-dongli.zhang@oracle.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/xen/smp_hvm.c |  6 ++++++
 arch/x86/xen/time.c    | 24 +++++++++++++++++++++++-
 2 files changed, 29 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/x86/xen/smp_hvm.c b/arch/x86/xen/smp_hvm.c
index f8d39440b292..e5bd9eb42191 100644
--- a/arch/x86/xen/smp_hvm.c
+++ b/arch/x86/xen/smp_hvm.c
@@ -18,6 +18,12 @@  static void __init xen_hvm_smp_prepare_boot_cpu(void)
 	 */
 	xen_vcpu_setup(0);
 
+	/*
+	 * Called again in case the kernel boots on vcpu >= MAX_VIRT_CPUS.
+	 * Refer to comments in xen_hvm_init_time_ops().
+	 */
+	xen_hvm_init_time_ops();
+
 	/*
 	 * The alternative logic (which patches the unlock/lock) runs before
 	 * the smp bootup up code is activated. Hence we need to set this up
diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
index 01dcccf9185f..9809de9f2310 100644
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -547,6 +547,11 @@  static void xen_hvm_setup_cpu_clockevents(void)
 
 void __init xen_hvm_init_time_ops(void)
 {
+	static bool hvm_time_initialized;
+
+	if (hvm_time_initialized)
+		return;
+
 	/*
 	 * vector callback is needed otherwise we cannot receive interrupts
 	 * on cpu > 0 and at this point we don't know how many cpus are
@@ -556,7 +561,22 @@  void __init xen_hvm_init_time_ops(void)
 		return;
 
 	if (!xen_feature(XENFEAT_hvm_safe_pvclock)) {
-		pr_info("Xen doesn't support pvclock on HVM, disable pv timer");
+		pr_info_once("Xen doesn't support pvclock on HVM, disable pv timer");
+		return;
+	}
+
+	/*
+	 * Only MAX_VIRT_CPUS 'vcpu_info' are embedded inside 'shared_info'.
+	 * The __this_cpu_read(xen_vcpu) is still NULL when Xen HVM guest
+	 * boots on vcpu >= MAX_VIRT_CPUS (e.g., kexec), To access
+	 * __this_cpu_read(xen_vcpu) via xen_clocksource_read() will panic.
+	 *
+	 * The xen_hvm_init_time_ops() should be called again later after
+	 * __this_cpu_read(xen_vcpu) is available.
+	 */
+	if (!__this_cpu_read(xen_vcpu)) {
+		pr_info("Delay xen_init_time_common() as kernel is running on vcpu=%d\n",
+			xen_vcpu_nr(0));
 		return;
 	}
 
@@ -568,5 +588,7 @@  void __init xen_hvm_init_time_ops(void)
 	x86_platform.calibrate_tsc = xen_tsc_khz;
 	x86_platform.get_wallclock = xen_get_wallclock;
 	x86_platform.set_wallclock = xen_set_wallclock;
+
+	hvm_time_initialized = true;
 }
 #endif