diff mbox series

[4.19,240/338] can: mcba_usb: properly check endpoint type

Message ID 20220414110845.722712456@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg KH April 14, 2022, 1:12 p.m. UTC 
From: Pavel Skripkin <paskripkin@gmail.com>

commit 136bed0bfd3bc9c95c88aafff2d22ecb3a919f23 upstream.

Syzbot reported warning in usb_submit_urb() which is caused by wrong
endpoint type. We should check that in endpoint is actually present to
prevent this warning.

Found pipes are now saved to struct mcba_priv and code uses them
directly instead of making pipes in place.

Fail log:

| usb 5-1: BOGUS urb xfer, pipe 3 != type 1
| WARNING: CPU: 1 PID: 49 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
| Modules linked in:
| CPU: 1 PID: 49 Comm: kworker/1:2 Not tainted 5.17.0-rc6-syzkaller-00184-g38f80f42147f #0
| Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
| Workqueue: usb_hub_wq hub_event
| RIP: 0010:usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
| ...
| Call Trace:
|  <TASK>
|  mcba_usb_start drivers/net/can/usb/mcba_usb.c:662 [inline]
|  mcba_usb_probe+0x8a3/0xc50 drivers/net/can/usb/mcba_usb.c:858
|  usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396
|  call_driver_probe drivers/base/dd.c:517 [inline]

Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
Link: https://lore.kernel.org/all/20220313100903.10868-1-paskripkin@gmail.com
Reported-and-tested-by: syzbot+3bc1dce0cc0052d60fde@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/can/usb/mcba_usb.c |   26 ++++++++++++++++----------
 1 file changed, 16 insertions(+), 10 deletions(-)
diff mbox series

Patch

--- a/drivers/net/can/usb/mcba_usb.c
+++ b/drivers/net/can/usb/mcba_usb.c
@@ -44,10 +44,6 @@ 
 #define MCBA_USB_RX_BUFF_SIZE 64
 #define MCBA_USB_TX_BUFF_SIZE (sizeof(struct mcba_usb_msg))
 
-/* MCBA endpoint numbers */
-#define MCBA_USB_EP_IN 1
-#define MCBA_USB_EP_OUT 1
-
 /* Microchip command id */
 #define MBCA_CMD_RECEIVE_MESSAGE 0xE3
 #define MBCA_CMD_I_AM_ALIVE_FROM_CAN 0xF5
@@ -95,6 +91,8 @@  struct mcba_priv {
 	atomic_t free_ctx_cnt;
 	void *rxbuf[MCBA_MAX_RX_URBS];
 	dma_addr_t rxbuf_dma[MCBA_MAX_RX_URBS];
+	int rx_pipe;
+	int tx_pipe;
 };
 
 /* CAN frame */
@@ -283,10 +281,8 @@  static netdev_tx_t mcba_usb_xmit(struct
 
 	memcpy(buf, usb_msg, MCBA_USB_TX_BUFF_SIZE);
 
-	usb_fill_bulk_urb(urb, priv->udev,
-			  usb_sndbulkpipe(priv->udev, MCBA_USB_EP_OUT), buf,
-			  MCBA_USB_TX_BUFF_SIZE, mcba_usb_write_bulk_callback,
-			  ctx);
+	usb_fill_bulk_urb(urb, priv->udev, priv->tx_pipe, buf, MCBA_USB_TX_BUFF_SIZE,
+			  mcba_usb_write_bulk_callback, ctx);
 
 	urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 	usb_anchor_urb(urb, &priv->tx_submitted);
@@ -621,7 +617,7 @@  static void mcba_usb_read_bulk_callback(
 resubmit_urb:
 
 	usb_fill_bulk_urb(urb, priv->udev,
-			  usb_rcvbulkpipe(priv->udev, MCBA_USB_EP_OUT),
+			  priv->rx_pipe,
 			  urb->transfer_buffer, MCBA_USB_RX_BUFF_SIZE,
 			  mcba_usb_read_bulk_callback, priv);
 
@@ -666,7 +662,7 @@  static int mcba_usb_start(struct mcba_pr
 		urb->transfer_dma = buf_dma;
 
 		usb_fill_bulk_urb(urb, priv->udev,
-				  usb_rcvbulkpipe(priv->udev, MCBA_USB_EP_IN),
+				  priv->rx_pipe,
 				  buf, MCBA_USB_RX_BUFF_SIZE,
 				  mcba_usb_read_bulk_callback, priv);
 		urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
@@ -820,6 +816,13 @@  static int mcba_usb_probe(struct usb_int
 	struct mcba_priv *priv;
 	int err = -ENOMEM;
 	struct usb_device *usbdev = interface_to_usbdev(intf);
+	struct usb_endpoint_descriptor *in, *out;
+
+	err = usb_find_common_endpoints(intf->cur_altsetting, &in, &out, NULL, NULL);
+	if (err) {
+		dev_err(&intf->dev, "Can't find endpoints\n");
+		return err;
+	}
 
 	netdev = alloc_candev(sizeof(struct mcba_priv), MCBA_MAX_TX_URBS);
 	if (!netdev) {
@@ -865,6 +868,9 @@  static int mcba_usb_probe(struct usb_int
 		goto cleanup_free_candev;
 	}
 
+	priv->rx_pipe = usb_rcvbulkpipe(priv->udev, in->bEndpointAddress);
+	priv->tx_pipe = usb_sndbulkpipe(priv->udev, out->bEndpointAddress);
+
 	devm_can_led_init(netdev);
 
 	/* Start USB dev only if we have successfully registered CAN device */