diff mbox series

[5.17,0804/1126] clk: Initialize orphan req_rate

Message ID 20220405070431.168654604@linuxfoundation.org
State Superseded
Headers show
Series None | expand

Commit Message

Greg Kroah-Hartman April 5, 2022, 7:25 a.m. UTC 
From: Maxime Ripard <maxime@cerno.tech>

[ Upstream commit 5f7e2af00807f2117650e711a58b7f0e986ce1df ]

When registering a clock that doesn't have a recalc_rate implementation,
and doesn't have its parent registered yet, we initialize the clk_core
rate and 'req_rate' fields to 0.

The rate field is later updated when the parent is registered in
clk_core_reparent_orphans_nolock() using __clk_recalc_rates(), but the
'req_rate' field is never updated.

This leads to an issue in clk_set_rate_range() and clk_put(), since
those functions will call clk_set_rate() with the content of 'req_rate'
to provide drivers with the opportunity to change the rate based on the
new boundaries. In this case, we would call clk_set_rate() with a rate
of 0, effectively enforcing the minimum allowed for this clock whenever
we would call one of those two functions, even though the actual rate
might be within range.

Let's fix this by setting 'req_rate' in
clk_core_reparent_orphans_nolock() with the rate field content just
updated by the call to __clk_recalc_rates().

Fixes: 1c8e600440c7 ("clk: Add rate constraints to clocks")
Reported-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> # T30 Nexus7
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220325161144.1901695-2-maxime@cerno.tech
[sboyd@kernel.org: Reword comment]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/clk.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)
diff mbox series

Patch

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index fff5edb89d6d..01b64b962e76 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -3456,6 +3456,19 @@  static void clk_core_reparent_orphans_nolock(void)
 			__clk_set_parent_after(orphan, parent, NULL);
 			__clk_recalc_accuracies(orphan);
 			__clk_recalc_rates(orphan, 0);
+
+			/*
+			 * __clk_init_parent() will set the initial req_rate to
+			 * 0 if the clock doesn't have clk_ops::recalc_rate and
+			 * is an orphan when it's registered.
+			 *
+			 * 'req_rate' is used by clk_set_rate_range() and
+			 * clk_put() to trigger a clk_set_rate() call whenever
+			 * the boundaries are modified. Let's make sure
+			 * 'req_rate' is set to something non-zero so that
+			 * clk_set_rate_range() doesn't drop the frequency.
+			 */
+			orphan->req_rate = orphan->rate;
 		}
 	}
 }