diff mbox series

[5.17,0715/1126] fsi: scom: Remove retries in indirect scoms

Message ID 20220405070428.583773894@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg Kroah-Hartman April 5, 2022, 7:24 a.m. UTC 
From: Joel Stanley <joel@jms.id.au>

[ Upstream commit ab1b79159ad5a6dc4e4994b49737f7feb13b7155 ]

In commit f72ddbe1d7b7 ("fsi: scom: Remove retries") the retries were
removed from get and put scoms. That patch missed the retires in get and
put indirect scom.

For the same reason, remove them from the scom driver to allow the
caller to decide to retry.

This removes the following special case which would have caused the
retry code to return early:

 -       if ((ind_data & XSCOM_DATA_IND_COMPLETE) || (err != SCOM_PIB_BLOCKED))
 -               return 0;

I believe this case is handled.

Fixes: f72ddbe1d7b7 ("fsi: scom: Remove retries")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20211207033811.518981-3-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/fsi/fsi-scom.c | 41 +++++++++++++++--------------------------
 1 file changed, 15 insertions(+), 26 deletions(-)
diff mbox series

Patch

diff --git a/drivers/fsi/fsi-scom.c b/drivers/fsi/fsi-scom.c
index 3b427f7e9027..bcb756dc9866 100644
--- a/drivers/fsi/fsi-scom.c
+++ b/drivers/fsi/fsi-scom.c
@@ -145,7 +145,7 @@  static int put_indirect_scom_form0(struct scom_device *scom, uint64_t value,
 				   uint64_t addr, uint32_t *status)
 {
 	uint64_t ind_data, ind_addr;
-	int rc, retries, err = 0;
+	int rc, err;
 
 	if (value & ~XSCOM_DATA_IND_DATA)
 		return -EINVAL;
@@ -156,19 +156,14 @@  static int put_indirect_scom_form0(struct scom_device *scom, uint64_t value,
 	if (rc || (*status & SCOM_STATUS_ANY_ERR))
 		return rc;
 
-	for (retries = 0; retries < SCOM_MAX_IND_RETRIES; retries++) {
-		rc = __get_scom(scom, &ind_data, addr, status);
-		if (rc || (*status & SCOM_STATUS_ANY_ERR))
-			return rc;
+	rc = __get_scom(scom, &ind_data, addr, status);
+	if (rc || (*status & SCOM_STATUS_ANY_ERR))
+		return rc;
 
-		err = (ind_data & XSCOM_DATA_IND_ERR_MASK) >> XSCOM_DATA_IND_ERR_SHIFT;
-		*status = err << SCOM_STATUS_PIB_RESP_SHIFT;
-		if ((ind_data & XSCOM_DATA_IND_COMPLETE) || (err != SCOM_PIB_BLOCKED))
-			return 0;
+	err = (ind_data & XSCOM_DATA_IND_ERR_MASK) >> XSCOM_DATA_IND_ERR_SHIFT;
+	*status = err << SCOM_STATUS_PIB_RESP_SHIFT;
 
-		msleep(1);
-	}
-	return rc;
+	return 0;
 }
 
 static int put_indirect_scom_form1(struct scom_device *scom, uint64_t value,
@@ -188,7 +183,7 @@  static int get_indirect_scom_form0(struct scom_device *scom, uint64_t *value,
 				   uint64_t addr, uint32_t *status)
 {
 	uint64_t ind_data, ind_addr;
-	int rc, retries, err = 0;
+	int rc, err;
 
 	ind_addr = addr & XSCOM_ADDR_DIRECT_PART;
 	ind_data = (addr & XSCOM_ADDR_INDIRECT_PART) | XSCOM_DATA_IND_READ;
@@ -196,21 +191,15 @@  static int get_indirect_scom_form0(struct scom_device *scom, uint64_t *value,
 	if (rc || (*status & SCOM_STATUS_ANY_ERR))
 		return rc;
 
-	for (retries = 0; retries < SCOM_MAX_IND_RETRIES; retries++) {
-		rc = __get_scom(scom, &ind_data, addr, status);
-		if (rc || (*status & SCOM_STATUS_ANY_ERR))
-			return rc;
-
-		err = (ind_data & XSCOM_DATA_IND_ERR_MASK) >> XSCOM_DATA_IND_ERR_SHIFT;
-		*status = err << SCOM_STATUS_PIB_RESP_SHIFT;
-		*value = ind_data & XSCOM_DATA_IND_DATA;
+	rc = __get_scom(scom, &ind_data, addr, status);
+	if (rc || (*status & SCOM_STATUS_ANY_ERR))
+		return rc;
 
-		if ((ind_data & XSCOM_DATA_IND_COMPLETE) || (err != SCOM_PIB_BLOCKED))
-			return 0;
+	err = (ind_data & XSCOM_DATA_IND_ERR_MASK) >> XSCOM_DATA_IND_ERR_SHIFT;
+	*status = err << SCOM_STATUS_PIB_RESP_SHIFT;
+	*value = ind_data & XSCOM_DATA_IND_DATA;
 
-		msleep(1);
-	}
-	return rc;
+	return 0;
 }
 
 static int raw_put_scom(struct scom_device *scom, uint64_t value,