@@ -37,11 +37,24 @@ static const struct regmap_config attiny_regmap_config = {
static int attiny_lcd_power_enable(struct regulator_dev *rdev)
{
unsigned int data;
+ int ret, i;
regmap_write(rdev->regmap, REG_POWERON, 1);
+ msleep(80);
+
/* Wait for nPWRDWN to go low to indicate poweron is done. */
- regmap_read_poll_timeout(rdev->regmap, REG_PORTB, data,
- data & BIT(0), 10, 1000000);
+ for (i = 0; i < 20; i++) {
+ ret = regmap_read(rdev->regmap, REG_PORTB, &data);
+ if (!ret) {
+ if (data & BIT(0))
+ break;
+ }
+ usleep_range(10000, 12000);
+ }
+ usleep_range(10000, 12000);
+
+ if (ret)
+ pr_err("%s: regmap_read_poll_timeout failed %d\n", __func__, ret);
/* Default to the same orientation as the closed source
* firmware used for the panel. Runtime rotation
@@ -57,23 +70,34 @@ static int attiny_lcd_power_disable(struct regulator_dev *rdev)
{
regmap_write(rdev->regmap, REG_PWM, 0);
regmap_write(rdev->regmap, REG_POWERON, 0);
- udelay(1);
+ msleep(30);
return 0;
}
static int attiny_lcd_power_is_enabled(struct regulator_dev *rdev)
{
unsigned int data;
- int ret;
+ int ret, i;
- ret = regmap_read(rdev->regmap, REG_POWERON, &data);
+ for (i = 0; i < 10; i++) {
+ ret = regmap_read(rdev->regmap, REG_POWERON, &data);
+ if (!ret)
+ break;
+ usleep_range(10000, 12000);
+ }
if (ret < 0)
return ret;
if (!(data & BIT(0)))
return 0;
- ret = regmap_read(rdev->regmap, REG_PORTB, &data);
+ for (i = 0; i < 10; i++) {
+ ret = regmap_read(rdev->regmap, REG_PORTB, &data);
+ if (!ret)
+ break;
+ usleep_range(10000, 12000);
+ }
+
if (ret < 0)
return ret;
@@ -103,20 +127,32 @@ static int attiny_update_status(struct backlight_device *bl)
{
struct regmap *regmap = bl_get_data(bl);
int brightness = bl->props.brightness;
+ int ret, i;
if (bl->props.power != FB_BLANK_UNBLANK ||
bl->props.fb_blank != FB_BLANK_UNBLANK)
brightness = 0;
- return regmap_write(regmap, REG_PWM, brightness);
+ for (i = 0; i < 10; i++) {
+ ret = regmap_write(regmap, REG_PWM, brightness);
+ if (!ret)
+ break;
+ }
+
+ return ret;
}
static int attiny_get_brightness(struct backlight_device *bl)
{
struct regmap *regmap = bl_get_data(bl);
- int ret, brightness;
+ int ret, brightness, i;
+
+ for (i = 0; i < 10; i++) {
+ ret = regmap_read(regmap, REG_PWM, &brightness);
+ if (!ret)
+ break;
+ }
- ret = regmap_read(regmap, REG_PWM, &brightness);
if (ret)
return ret;
@@ -166,7 +202,7 @@ static int attiny_i2c_probe(struct i2c_client *i2c,
}
regmap_write(regmap, REG_POWERON, 0);
- mdelay(1);
+ msleep(30);
config.dev = &i2c->dev;
config.regmap = regmap;