diff mbox series

[5.15,132/171] hwmon: (lm90) Re-enable interrupts after alert clears

Message ID 20220131105234.476637088@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg KH Jan. 31, 2022, 10:56 a.m. UTC 
From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit bc341a1a98827925082e95db174734fc8bd68af6 ]

If alert handling is broken, interrupts are disabled after an alert and
re-enabled after the alert clears. However, if there is an interrupt
handler, this does not apply if alerts were originally disabled and enabled
when the driver was loaded. In that case, interrupts will stay disabled
after an alert was handled though the alert handler even after the alert
condition clears. Address the situation by always re-enabling interrupts
after the alert condition clears if there is an interrupt handler.

Fixes: 2abdc357c55d9 ("hwmon: (lm90) Unmask hardware interrupt")
Cc: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/lm90.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index cc5e48fe304b1..e4ecf3440d7cf 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -848,7 +848,7 @@  static int lm90_update_device(struct device *dev)
 		 * Re-enable ALERT# output if it was originally enabled and
 		 * relevant alarms are all clear
 		 */
-		if (!(data->config_orig & 0x80) &&
+		if ((client->irq || !(data->config_orig & 0x80)) &&
 		    !(data->alarms & data->alert_alarms)) {
 			if (data->config & 0x80) {
 				dev_dbg(&client->dev, "Re-enabling ALERT#\n");