diff mbox series

[5.15,203/207] serial: 8250: Fix RTS modem control while in rs485 mode

Message ID 20211206145617.310210380@linuxfoundation.org
State Superseded
Headers show
Series None | expand

Commit Message

Greg Kroah-Hartman Dec. 6, 2021, 2:57 p.m. UTC 
From: Lukas Wunner <lukas@wunner.de>

commit f85e04503f369b3f2be28c83fc48b74e19936ebc upstream.

Commit f45709df7731 ("serial: 8250: Don't touch RTS modem control while
in rs485 mode") sought to prevent user space from interfering with rs485
communication by ignoring a TIOCMSET ioctl() which changes RTS polarity.

It did so in serial8250_do_set_mctrl(), which turns out to be too deep
in the call stack:  When a uart_port is opened, RTS polarity is set by
the rs485-aware function uart_port_dtr_rts().  It calls down to
serial8250_do_set_mctrl() and that particular RTS polarity change should
*not* be ignored.

The user-visible result is that on 8250_omap ports which use rs485 with
inverse polarity (RTS bit in MCR register is 1 to receive, 0 to send),
a newly opened port initially sets up RTS for sending instead of
receiving.  That's because omap_8250_startup() sets the cached value
up->mcr to 0 and omap_8250_restore_regs() subsequently writes it to the
MCR register.  Due to the commit, serial8250_do_set_mctrl() preserves
that incorrect register value:

do_sys_openat2
  do_filp_open
    path_openat
      vfs_open
        do_dentry_open
	  chrdev_open
	    tty_open
	      uart_open
	        tty_port_open
		  uart_port_activate
		    uart_startup
		      uart_port_startup
		        serial8250_startup
			  omap_8250_startup # up->mcr = 0
			uart_change_speed
			  serial8250_set_termios
			    omap_8250_set_termios
			      omap_8250_restore_regs
			        serial8250_out_MCR # up->mcr written
		  tty_port_block_til_ready
		    uart_dtr_rts
		      uart_port_dtr_rts
		        serial8250_set_mctrl
			  omap8250_set_mctrl
			    serial8250_do_set_mctrl # mcr[1] = 1 ignored

Fix by intercepting RTS changes from user space in uart_tiocmset()
instead.

Link: https://lore.kernel.org/linux-serial/20211027111644.1996921-1-baocheng.su@siemens.com/
Fixes: f45709df7731 ("serial: 8250: Don't touch RTS modem control while in rs485 mode")
Cc: Chao Zeng <chao.zeng@siemens.com>
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Su Bao Cheng <baocheng.su@siemens.com>
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Tested-by: Su Bao Cheng <baocheng.su@siemens.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/21170e622a1aaf842a50b32146008b5374b3dd1d.1637596432.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_port.c |    7 -------
 drivers/tty/serial/serial_core.c    |    5 +++++
 2 files changed, 5 insertions(+), 7 deletions(-)
diff mbox series

Patch

--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -2024,13 +2024,6 @@  void serial8250_do_set_mctrl(struct uart
 	struct uart_8250_port *up = up_to_u8250p(port);
 	unsigned char mcr;
 
-	if (port->rs485.flags & SER_RS485_ENABLED) {
-		if (serial8250_in_MCR(up) & UART_MCR_RTS)
-			mctrl |= TIOCM_RTS;
-		else
-			mctrl &= ~TIOCM_RTS;
-	}
-
 	mcr = serial8250_TIOCM_to_MCR(mctrl);
 
 	mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr;
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -1075,6 +1075,11 @@  uart_tiocmset(struct tty_struct *tty, un
 		goto out;
 
 	if (!tty_io_error(tty)) {
+		if (uport->rs485.flags & SER_RS485_ENABLED) {
+			set &= ~TIOCM_RTS;
+			clear &= ~TIOCM_RTS;
+		}
+
 		uart_update_mctrl(uport, set, clear);
 		ret = 0;
 	}