diff mbox series

[5.14,380/432] usb: isp1760: use the right irq status bit

Message ID 20210916155823.698180802@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg KH Sept. 16, 2021, 4:02 p.m. UTC
From: Rui Miguel Silva <rui.silva@linaro.org>


[ Upstream commit 955d0fb590f18ec5c3a4085c7d0e39b6abde0dd6 ]

Instead of using the fields enum values to check interrupts
trigged, use the correct bit values.

Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>

Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>

Link: https://lore.kernel.org/r/20210827131154.4151862-5-rui.silva@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Sasha Levin <sashal@kernel.org>

---
 drivers/usb/isp1760/isp1760-udc.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

-- 
2.30.2
diff mbox series

Patch

diff --git a/drivers/usb/isp1760/isp1760-udc.c b/drivers/usb/isp1760/isp1760-udc.c
index a78da59d6417..5cafd23345ca 100644
--- a/drivers/usb/isp1760/isp1760-udc.c
+++ b/drivers/usb/isp1760/isp1760-udc.c
@@ -1363,7 +1363,7 @@  static irqreturn_t isp1760_udc_irq(int irq, void *dev)
 
 	status = isp1760_udc_irq_get_status(udc);
 
-	if (status & DC_IEVBUS) {
+	if (status & ISP176x_DC_IEVBUS) {
 		dev_dbg(udc->isp->dev, "%s(VBUS)\n", __func__);
 		/* The VBUS interrupt is only triggered when VBUS appears. */
 		spin_lock(&udc->lock);
@@ -1371,7 +1371,7 @@  static irqreturn_t isp1760_udc_irq(int irq, void *dev)
 		spin_unlock(&udc->lock);
 	}
 
-	if (status & DC_IEBRST) {
+	if (status & ISP176x_DC_IEBRST) {
 		dev_dbg(udc->isp->dev, "%s(BRST)\n", __func__);
 
 		isp1760_udc_reset(udc);
@@ -1391,18 +1391,18 @@  static irqreturn_t isp1760_udc_irq(int irq, void *dev)
 		}
 	}
 
-	if (status & DC_IEP0SETUP) {
+	if (status & ISP176x_DC_IEP0SETUP) {
 		dev_dbg(udc->isp->dev, "%s(EP0SETUP)\n", __func__);
 
 		isp1760_ep0_setup(udc);
 	}
 
-	if (status & DC_IERESM) {
+	if (status & ISP176x_DC_IERESM) {
 		dev_dbg(udc->isp->dev, "%s(RESM)\n", __func__);
 		isp1760_udc_resume(udc);
 	}
 
-	if (status & DC_IESUSP) {
+	if (status & ISP176x_DC_IESUSP) {
 		dev_dbg(udc->isp->dev, "%s(SUSP)\n", __func__);
 
 		spin_lock(&udc->lock);
@@ -1413,7 +1413,7 @@  static irqreturn_t isp1760_udc_irq(int irq, void *dev)
 		spin_unlock(&udc->lock);
 	}
 
-	if (status & DC_IEHS_STA) {
+	if (status & ISP176x_DC_IEHS_STA) {
 		dev_dbg(udc->isp->dev, "%s(HS_STA)\n", __func__);
 		udc->gadget.speed = USB_SPEED_HIGH;
 	}