@@ -127,22 +127,13 @@ static struct bus_type ap_bus_type;
/* Adapter interrupt definitions */
static void ap_interrupt_handler(struct airq_struct *airq, bool floating);
-static int ap_airq_flag;
+static bool ap_irq_flag;
static struct airq_struct ap_airq = {
.handler = ap_interrupt_handler,
.isc = AP_ISC,
};
-/**
- * ap_using_interrupts() - Returns non-zero if interrupt support is
- * available.
- */
-static inline int ap_using_interrupts(void)
-{
- return ap_airq_flag;
-}
-
/**
* ap_airq_ptr() - Get the address of the adapter interrupt indicator
*
@@ -152,7 +143,7 @@ static inline int ap_using_interrupts(void)
*/
void *ap_airq_ptr(void)
{
- if (ap_using_interrupts())
+ if (ap_irq_flag)
return ap_airq.lsi_ptr;
return NULL;
}
@@ -396,7 +387,7 @@ void ap_wait(enum ap_sm_wait wait)
switch (wait) {
case AP_SM_WAIT_AGAIN:
case AP_SM_WAIT_INTERRUPT:
- if (ap_using_interrupts())
+ if (ap_irq_flag)
break;
if (ap_poll_kthread) {
wake_up(&ap_poll_wait);
@@ -471,7 +462,7 @@ static void ap_tasklet_fn(unsigned long dummy)
* be received. Doing it in the beginning of the tasklet is therefor
* important that no requests on any AP get lost.
*/
- if (ap_using_interrupts())
+ if (ap_irq_flag)
xchg(ap_airq.lsi_ptr, 0);
spin_lock_bh(&ap_queues_lock);
@@ -541,7 +532,7 @@ static int ap_poll_thread_start(void)
{
int rc;
- if (ap_using_interrupts() || ap_poll_kthread)
+ if (ap_irq_flag || ap_poll_kthread)
return 0;
mutex_lock(&ap_poll_thread_mutex);
ap_poll_kthread = kthread_run(ap_poll_thread, NULL, "appoll");
@@ -1187,7 +1178,7 @@ static BUS_ATTR_RO(ap_adapter_mask);
static ssize_t ap_interrupts_show(struct bus_type *bus, char *buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n",
- ap_using_interrupts() ? 1 : 0);
+ ap_irq_flag ? 1 : 0);
}
static BUS_ATTR_RO(ap_interrupts);
@@ -1912,7 +1903,7 @@ static int __init ap_module_init(void)
/* enable interrupts if available */
if (ap_interrupts_available()) {
rc = register_adapter_interrupt(&ap_airq);
- ap_airq_flag = (rc == 0);
+ ap_irq_flag = (rc == 0);
}
/* Create /sys/bus/ap. */
@@ -1956,7 +1947,7 @@ out_work:
out_bus:
bus_unregister(&ap_bus_type);
out:
- if (ap_using_interrupts())
+ if (ap_irq_flag)
unregister_adapter_interrupt(&ap_airq);
kfree(ap_qci_info);
return rc;
@@ -80,12 +80,6 @@ static inline int ap_test_bit(unsigned int *ptr, unsigned int nr)
#define AP_FUNC_EP11 5
#define AP_FUNC_APXA 6
-/*
- * AP interrupt states
- */
-#define AP_INTR_DISABLED 0 /* AP interrupt disabled */
-#define AP_INTR_ENABLED 1 /* AP interrupt enabled */
-
/*
* AP queue state machine states
*/
@@ -112,7 +106,7 @@ enum ap_sm_event {
* AP queue state wait behaviour
*/
enum ap_sm_wait {
- AP_SM_WAIT_AGAIN, /* retry immediately */
+ AP_SM_WAIT_AGAIN = 0, /* retry immediately */
AP_SM_WAIT_TIMEOUT, /* wait for timeout */
AP_SM_WAIT_INTERRUPT, /* wait for thin interrupt (if available) */
AP_SM_WAIT_NONE, /* no wait */
@@ -186,7 +180,7 @@ struct ap_queue {
enum ap_dev_state dev_state; /* queue device state */
bool config; /* configured state */
ap_qid_t qid; /* AP queue id. */
- int interrupt; /* indicate if interrupts are enabled */
+ bool interrupt; /* indicate if interrupts are enabled */
int queue_count; /* # messages currently on AP queue. */
int pendingq_count; /* # requests on pendingq list. */
int requestq_count; /* # requests on requestq list. */
@@ -19,7 +19,7 @@
static void __ap_flush_queue(struct ap_queue *aq);
/**
- * ap_queue_enable_interruption(): Enable interruption on an AP queue.
+ * ap_queue_enable_irq(): Enable interrupt support on this AP queue.
* @qid: The AP queue number
* @ind: the notification indicator byte
*
@@ -27,7 +27,7 @@ static void __ap_flush_queue(struct ap_queue *aq);
* value it waits a while and tests the AP queue if interrupts
* have been switched on using ap_test_queue().
*/
-static int ap_queue_enable_interruption(struct ap_queue *aq, void *ind)
+static int ap_queue_enable_irq(struct ap_queue *aq, void *ind)
{
struct ap_queue_status status;
struct ap_qirq_ctrl qirqctrl = { 0 };
@@ -218,7 +218,8 @@ static enum ap_sm_wait ap_sm_read(struct ap_queue *aq)
return AP_SM_WAIT_NONE;
case AP_RESPONSE_NO_PENDING_REPLY:
if (aq->queue_count > 0)
- return AP_SM_WAIT_INTERRUPT;
+ return aq->interrupt ?
+ AP_SM_WAIT_INTERRUPT : AP_SM_WAIT_TIMEOUT;
aq->sm_state = AP_SM_STATE_IDLE;
return AP_SM_WAIT_NONE;
default:
@@ -272,7 +273,8 @@ static enum ap_sm_wait ap_sm_write(struct ap_queue *aq)
fallthrough;
case AP_RESPONSE_Q_FULL:
aq->sm_state = AP_SM_STATE_QUEUE_FULL;
- return AP_SM_WAIT_INTERRUPT;
+ return aq->interrupt ?
+ AP_SM_WAIT_INTERRUPT : AP_SM_WAIT_TIMEOUT;
case AP_RESPONSE_RESET_IN_PROGRESS:
aq->sm_state = AP_SM_STATE_RESET_WAIT;
return AP_SM_WAIT_TIMEOUT;
@@ -322,7 +324,7 @@ static enum ap_sm_wait ap_sm_reset(struct ap_queue *aq)
case AP_RESPONSE_NORMAL:
case AP_RESPONSE_RESET_IN_PROGRESS:
aq->sm_state = AP_SM_STATE_RESET_WAIT;
- aq->interrupt = AP_INTR_DISABLED;
+ aq->interrupt = false;
return AP_SM_WAIT_TIMEOUT;
default:
aq->dev_state = AP_DEV_STATE_ERROR;
@@ -355,7 +357,7 @@ static enum ap_sm_wait ap_sm_reset_wait(struct ap_queue *aq)
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
lsi_ptr = ap_airq_ptr();
- if (lsi_ptr && ap_queue_enable_interruption(aq, lsi_ptr) == 0)
+ if (lsi_ptr && ap_queue_enable_irq(aq, lsi_ptr) == 0)
aq->sm_state = AP_SM_STATE_SETIRQ_WAIT;
else
aq->sm_state = (aq->queue_count > 0) ?
@@ -396,7 +398,7 @@ static enum ap_sm_wait ap_sm_setirq_wait(struct ap_queue *aq)
if (status.irq_enabled == 1) {
/* Irqs are now enabled */
- aq->interrupt = AP_INTR_ENABLED;
+ aq->interrupt = true;
aq->sm_state = (aq->queue_count > 0) ?
AP_SM_STATE_WORKING : AP_SM_STATE_IDLE;
}
@@ -586,7 +588,7 @@ static ssize_t interrupt_show(struct device *dev,
spin_lock_bh(&aq->lock);
if (aq->sm_state == AP_SM_STATE_SETIRQ_WAIT)
rc = scnprintf(buf, PAGE_SIZE, "Enable Interrupt pending.\n");
- else if (aq->interrupt == AP_INTR_ENABLED)
+ else if (aq->interrupt)
rc = scnprintf(buf, PAGE_SIZE, "Interrupts enabled.\n");
else
rc = scnprintf(buf, PAGE_SIZE, "Interrupts disabled.\n");
@@ -767,7 +769,7 @@ struct ap_queue *ap_queue_create(ap_qid_t qid, int device_type)
aq->ap_dev.device.type = &ap_queue_type;
aq->ap_dev.device_type = device_type;
aq->qid = qid;
- aq->interrupt = AP_INTR_DISABLED;
+ aq->interrupt = false;
spin_lock_init(&aq->lock);
INIT_LIST_HEAD(&aq->pendingq);
INIT_LIST_HEAD(&aq->requestq);