diff mbox series

[5.4,32/37] usb: host: xhci-rcar: Dont reload firmware after the completion

Message ID 20210910122918.220329770@linuxfoundation.org
State Superseded
Headers show
Series None | expand

Commit Message

Greg KH Sept. 10, 2021, 12:30 p.m. UTC 
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

commit 57f3ffdc11143f56f1314972fe86fe17a0dcde85 upstream.

According to the datasheet, "Upon the completion of FW Download,
there is no need to write or reload FW.". Otherwise, it's possible
to cause unexpected behaviors. So, adds such a condition.

Fixes: 4ac8918f3a73 ("usb: host: xhci-plat: add support for the R-Car H2 and M2 xHCI controllers")
Cc: stable@vger.kernel.org # v3.17+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210827063227.81990-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci-rcar.c |    7 +++++++
 1 file changed, 7 insertions(+)
diff mbox series

Patch

--- a/drivers/usb/host/xhci-rcar.c
+++ b/drivers/usb/host/xhci-rcar.c
@@ -134,6 +134,13 @@  static int xhci_rcar_download_firmware(s
 	const struct soc_device_attribute *attr;
 	const char *firmware_name;
 
+	/*
+	 * According to the datasheet, "Upon the completion of FW Download,
+	 * there is no need to write or reload FW".
+	 */
+	if (readl(regs + RCAR_USB3_DL_CTRL) & RCAR_USB3_DL_CTRL_FW_SUCCESS)
+		return 0;
+
 	attr = soc_device_match(rcar_quirks_match);
 	if (attr)
 		quirks = (uintptr_t)attr->data;