diff mbox series

[5.10,02/96] iio: adis: set GPIO reset pin direction

Message ID 20210816125435.025565619@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg KH Aug. 16, 2021, 1:01 p.m. UTC 
From: Antti Keränen <detegr@rbx.email>

commit 7e77ef8b8d600cf8448a2bbd32f682c28884551f upstream.

Set reset pin direction to output as the reset pin needs to be an active
low output pin.

Co-developed-by: Hannu Hartikainen <hannu@hrtk.in>
Signed-off-by: Hannu Hartikainen <hannu@hrtk.in>
Signed-off-by: Antti Keränen <detegr@rbx.email>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Fixes: ecb010d44108 ("iio: imu: adis: Refactor adis_initial_startup")
Link: https://lore.kernel.org/r/20210708095425.13295-1-detegr@rbx.email
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/imu/adis.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
diff mbox series

Patch

--- a/drivers/iio/imu/adis.c
+++ b/drivers/iio/imu/adis.c
@@ -415,12 +415,11 @@  int __adis_initial_startup(struct adis *
 	int ret;
 
 	/* check if the device has rst pin low */
-	gpio = devm_gpiod_get_optional(&adis->spi->dev, "reset", GPIOD_ASIS);
+	gpio = devm_gpiod_get_optional(&adis->spi->dev, "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(gpio))
 		return PTR_ERR(gpio);
 
 	if (gpio) {
-		gpiod_set_value_cansleep(gpio, 1);
 		msleep(10);
 		/* bring device out of reset */
 		gpiod_set_value_cansleep(gpio, 0);