diff mbox series

[5.10,2/2] arm64: dts: rockchip: Enable USB3 for rk3328 Rock64

Message ID 20210712194810.074c7c09@e7470.queued.net
State New
Headers show
Series arm64: dts: Fix USB 3 for rk3328 Rock64 boards | expand

Commit Message

Andres Salomon July 12, 2021, 11:48 p.m. UTC 
From: Cameron Nemo <cnemo@tutanota.com>

commit bbac8bd65f5402281cb7b0452c1c5f367387b459 upstream

Enable USB3 nodes for the rk3328-based PINE Rock64 board.

The separate power regulator is not added as it is controlled by the
same GPIO line as the existing VBUS regulators, so it is already
enabled. Also there is no port representation to tie the regulator to.

[wens@csie.org: Rebased onto v5.12]

Signed-off-by: Cameron Nemo <cnemo@tutanota.com>
[wens@csie.org: Rewrote commit message]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20210504083616.9654-2-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm64/boot/dts/rockchip/rk3328-rock64.dts | 5 +++++
 1 file changed, 5 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index 86cfb5c50a94..95ab6928cfd4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -384,6 +384,11 @@  &usb20_otg {
 	status = "okay";
 };
 
+&usbdrd3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
 &usb_host0_ehci {
 	status = "okay";
 };