diff mbox series

[5.13,044/800] ARM: dts: ux500: Fix LED probing

Message ID 20210712060919.565657039@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg KH July 12, 2021, 6:01 a.m. UTC
From: Linus Walleij <linus.walleij@linaro.org>


commit 7749510c459c10c431d746a4749e7c9cf2899156 upstream.

The Ux500 HREF LEDs have not been probing properly for a
while as this was introduce:

     ret = of_property_read_u32(np, "color", &led_color);
     if (ret)
             return ret;

Since the device tree did not define the new invented color
attribute, probe was failing.

Define color attributes for the LEDs so they work again.

Link: https://lore.kernel.org/r/20210613123356.880933-1-linus.walleij@linaro.org
Fixes: 92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx")
Cc: stable@vger.kernel.org
Cc: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Signed-off-by: Olof Johansson <olof@lixom.net>

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 arch/arm/boot/dts/ste-href.dtsi |    7 +++++++
 1 file changed, 7 insertions(+)
diff mbox series

Patch

--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -4,6 +4,7 @@ 
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
 #include "ste-href-family-pinctrl.dtsi"
 
 / {
@@ -64,17 +65,20 @@ 
 					reg = <0>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
+					color = <LED_COLOR_ID_BLUE>;
 					linux,default-trigger = "heartbeat";
 				};
 				chan@1 {
 					reg = <1>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
+					color = <LED_COLOR_ID_BLUE>;
 				};
 				chan@2 {
 					reg = <2>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
+					color = <LED_COLOR_ID_BLUE>;
 				};
 			};
 			lp5521@34 {
@@ -88,16 +92,19 @@ 
 					reg = <0>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
+					color = <LED_COLOR_ID_BLUE>;
 				};
 				chan@1 {
 					reg = <1>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
+					color = <LED_COLOR_ID_BLUE>;
 				};
 				chan@2 {
 					reg = <2>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
+					color = <LED_COLOR_ID_BLUE>;
 				};
 			};
 			bh1780@29 {