diff mbox series

[5.12,149/161] drm/msm/dpu: always use mdp device to scale bandwidth

Message ID 20210608175950.479055541@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg KH June 8, 2021, 6:27 p.m. UTC
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>


commit a670ff578f1fb855fedc7931fa5bbc06b567af22 upstream.

Currently DPU driver scales bandwidth and core clock for sc7180 only,
while the rest of chips get static bandwidth votes. Make all chipsets
scale bandwidth and clock per composition requirements like sc7180 does.
Drop old voting path completely.

Tested on RB3 (SDM845) and RB5 (SM8250).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Link: https://lore.kernel.org/r/20210401020533.3956787-2-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>

Signed-off-by: Amit Pundir <amit.pundir@linaro.org>

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c  |    3 -
 drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c |   51 -------------------------------
 2 files changed, 2 insertions(+), 52 deletions(-)
diff mbox series

Patch

--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -933,8 +933,7 @@  static int dpu_kms_hw_init(struct msm_km
 		DPU_DEBUG("REG_DMA is not defined");
 	}
 
-	if (of_device_is_compatible(dev->dev->of_node, "qcom,sc7180-mdss"))
-		dpu_kms_parse_data_bus_icc_path(dpu_kms);
+	dpu_kms_parse_data_bus_icc_path(dpu_kms);
 
 	pm_runtime_get_sync(&dpu_kms->pdev->dev);
 
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c
@@ -31,40 +31,8 @@  struct dpu_mdss {
 	void __iomem *mmio;
 	struct dss_module_power mp;
 	struct dpu_irq_controller irq_controller;
-	struct icc_path *path[2];
-	u32 num_paths;
 };
 
-static int dpu_mdss_parse_data_bus_icc_path(struct drm_device *dev,
-						struct dpu_mdss *dpu_mdss)
-{
-	struct icc_path *path0 = of_icc_get(dev->dev, "mdp0-mem");
-	struct icc_path *path1 = of_icc_get(dev->dev, "mdp1-mem");
-
-	if (IS_ERR_OR_NULL(path0))
-		return PTR_ERR_OR_ZERO(path0);
-
-	dpu_mdss->path[0] = path0;
-	dpu_mdss->num_paths = 1;
-
-	if (!IS_ERR_OR_NULL(path1)) {
-		dpu_mdss->path[1] = path1;
-		dpu_mdss->num_paths++;
-	}
-
-	return 0;
-}
-
-static void dpu_mdss_icc_request_bw(struct msm_mdss *mdss)
-{
-	struct dpu_mdss *dpu_mdss = to_dpu_mdss(mdss);
-	int i;
-	u64 avg_bw = dpu_mdss->num_paths ? MAX_BW / dpu_mdss->num_paths : 0;
-
-	for (i = 0; i < dpu_mdss->num_paths; i++)
-		icc_set_bw(dpu_mdss->path[i], avg_bw, kBps_to_icc(MAX_BW));
-}
-
 static void dpu_mdss_irq(struct irq_desc *desc)
 {
 	struct dpu_mdss *dpu_mdss = irq_desc_get_handler_data(desc);
@@ -178,8 +146,6 @@  static int dpu_mdss_enable(struct msm_md
 	struct dss_module_power *mp = &dpu_mdss->mp;
 	int ret;
 
-	dpu_mdss_icc_request_bw(mdss);
-
 	ret = msm_dss_enable_clk(mp->clk_config, mp->num_clk, true);
 	if (ret) {
 		DPU_ERROR("clock enable failed, ret:%d\n", ret);
@@ -213,15 +179,12 @@  static int dpu_mdss_disable(struct msm_m
 {
 	struct dpu_mdss *dpu_mdss = to_dpu_mdss(mdss);
 	struct dss_module_power *mp = &dpu_mdss->mp;
-	int ret, i;
+	int ret;
 
 	ret = msm_dss_enable_clk(mp->clk_config, mp->num_clk, false);
 	if (ret)
 		DPU_ERROR("clock disable failed, ret:%d\n", ret);
 
-	for (i = 0; i < dpu_mdss->num_paths; i++)
-		icc_set_bw(dpu_mdss->path[i], 0, 0);
-
 	return ret;
 }
 
@@ -232,7 +195,6 @@  static void dpu_mdss_destroy(struct drm_
 	struct dpu_mdss *dpu_mdss = to_dpu_mdss(priv->mdss);
 	struct dss_module_power *mp = &dpu_mdss->mp;
 	int irq;
-	int i;
 
 	pm_runtime_suspend(dev->dev);
 	pm_runtime_disable(dev->dev);
@@ -242,9 +204,6 @@  static void dpu_mdss_destroy(struct drm_
 	msm_dss_put_clk(mp->clk_config, mp->num_clk);
 	devm_kfree(&pdev->dev, mp->clk_config);
 
-	for (i = 0; i < dpu_mdss->num_paths; i++)
-		icc_put(dpu_mdss->path[i]);
-
 	if (dpu_mdss->mmio)
 		devm_iounmap(&pdev->dev, dpu_mdss->mmio);
 	dpu_mdss->mmio = NULL;
@@ -276,12 +235,6 @@  int dpu_mdss_init(struct drm_device *dev
 
 	DRM_DEBUG("mapped mdss address space @%pK\n", dpu_mdss->mmio);
 
-	if (!of_device_is_compatible(dev->dev->of_node, "qcom,sc7180-mdss")) {
-		ret = dpu_mdss_parse_data_bus_icc_path(dev, dpu_mdss);
-		if (ret)
-			return ret;
-	}
-
 	mp = &dpu_mdss->mp;
 	ret = msm_dss_parse_clock(pdev, mp);
 	if (ret) {
@@ -307,8 +260,6 @@  int dpu_mdss_init(struct drm_device *dev
 
 	pm_runtime_enable(dev->dev);
 
-	dpu_mdss_icc_request_bw(priv->mdss);
-
 	return ret;
 
 irq_error: