diff mbox series

[5.12,084/296] iio: adc: ad7192: handle regulator voltage error first

Message ID 20210531130706.691400827@linuxfoundation.org
State Superseded
Headers show
Series None | expand

Commit Message

Greg KH May 31, 2021, 1:12 p.m. UTC
From: Alexandru Ardelean <aardelean@deviqon.com>

commit b0f27fca5a6c7652e265aae6a4452ce2f2ed64da upstream.

This change fixes a corner-case, where for a zero regulator value, the
driver would exit early, initializing the driver only partially.
The driver would be in an unknown state.

This change reworks the code to check regulator_voltage() return value
for negative (error) first, and return early. This is the more common
idiom.

Also, this change is removing the 'voltage_uv' variable and using the 'ret'
value directly. The only place where 'voltage_uv' is being used is to
compute the internal reference voltage, and the type of this variable is
'int' (same are for 'ret'). Using only 'ret' avoids having to assign it on
the error path.

Fixes: ab0afa65bbc7 ("staging: iio: adc: ad7192: fail probe on get_voltage")
Cc: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/adc/ad7192.c |   11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)
diff mbox series

Patch

--- a/drivers/iio/adc/ad7192.c
+++ b/drivers/iio/adc/ad7192.c
@@ -912,7 +912,7 @@  static int ad7192_probe(struct spi_devic
 {
 	struct ad7192_state *st;
 	struct iio_dev *indio_dev;
-	int ret, voltage_uv = 0;
+	int ret;
 
 	if (!spi->irq) {
 		dev_err(&spi->dev, "no IRQ?\n");
@@ -949,15 +949,12 @@  static int ad7192_probe(struct spi_devic
 		goto error_disable_avdd;
 	}
 
-	voltage_uv = regulator_get_voltage(st->avdd);
-
-	if (voltage_uv > 0) {
-		st->int_vref_mv = voltage_uv / 1000;
-	} else {
-		ret = voltage_uv;
+	ret = regulator_get_voltage(st->avdd);
+	if (ret < 0) {
 		dev_err(&spi->dev, "Device tree error, reference voltage undefined\n");
 		goto error_disable_avdd;
 	}
+	st->int_vref_mv = ret / 1000;
 
 	spi_set_drvdata(spi, indio_dev);
 	st->chip_info = of_device_get_match_data(&spi->dev);