diff mbox series

[5.12,024/677] usb: xhci-mtk: remove or operator for setting schedule parameters

Message ID 20210512144838.034506857@linuxfoundation.org
State Superseded
Headers show
Series None | expand

Commit Message

Greg KH May 12, 2021, 2:41 p.m. UTC 
From: Chunfeng Yun <chunfeng.yun@mediatek.com>

commit 5fa5827566e3affa1657ccf9b22706c06a5d021a upstream.

Side effect may happen if use or operator to set schedule parameters
when the parameters are already set before. Set them directly due to
other bits are reserved.

Fixes: 54f6a8af3722 ("usb: xhci-mtk: skip dropping bandwidth of unchecked endpoints")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/d287899e6beb2fc1bfb8900c75a872f628ecde55.1615170625.git.chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci-mtk-sch.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

--- a/drivers/usb/host/xhci-mtk-sch.c
+++ b/drivers/usb/host/xhci-mtk-sch.c
@@ -643,7 +643,7 @@  int xhci_mtk_add_ep_quirk(struct usb_hcd
 		 */
 		if (usb_endpoint_xfer_int(&ep->desc)
 			|| usb_endpoint_xfer_isoc(&ep->desc))
-			ep_ctx->reserved[0] |= cpu_to_le32(EP_BPKTS(1));
+			ep_ctx->reserved[0] = cpu_to_le32(EP_BPKTS(1));
 
 		return 0;
 	}
@@ -730,10 +730,10 @@  int xhci_mtk_check_bandwidth(struct usb_
 		list_move_tail(&sch_ep->endpoint, &sch_bw->bw_ep_list);
 
 		ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
-		ep_ctx->reserved[0] |= cpu_to_le32(EP_BPKTS(sch_ep->pkts)
+		ep_ctx->reserved[0] = cpu_to_le32(EP_BPKTS(sch_ep->pkts)
 			| EP_BCSCOUNT(sch_ep->cs_count)
 			| EP_BBM(sch_ep->burst_mode));
-		ep_ctx->reserved[1] |= cpu_to_le32(EP_BOFFSET(sch_ep->offset)
+		ep_ctx->reserved[1] = cpu_to_le32(EP_BOFFSET(sch_ep->offset)
 			| EP_BREPEAT(sch_ep->repeat));
 
 		xhci_dbg(xhci, " PKTS:%x, CSCOUNT:%x, BM:%x, OFFSET:%x, REPEAT:%x\n",