diff mbox series

[5.10,122/530] ARM: dts: exynos: correct PMIC interrupt trigger level on SMDK5250

Message ID 20210512144823.821137765@linuxfoundation.org
State Superseded
Headers show
Series None | expand

Commit Message

Greg Kroah-Hartman May 12, 2021, 2:43 p.m. UTC
From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit f6368c60561370e4a92fac22982a3bd656172170 ]

The Maxim PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Additionally, the interrupt line is shared so using level sensitive
interrupt is here especially important to avoid races.

Fixes: 47580e8d94c2 ("ARM: dts: Specify MAX77686 pmic interrupt for exynos5250-smdk5250")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212534.216197-8-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/exynos5250-smdk5250.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 186790f39e4d..d0e48c10aec2 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -134,7 +134,7 @@ 
 		compatible = "maxim,max77686";
 		reg = <0x09>;
 		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max77686_irq>;
 		#clock-cells = <1>;