diff mbox series

[5.11,711/775] mmc: sdhci-pci-o2micro: Bug fix for SDR104 HW tuning failure

Message ID 20210301161236.482051595@linuxfoundation.org
State Superseded
Headers show
Series None | expand

Commit Message

Greg KH March 1, 2021, 4:14 p.m. UTC
From: Shirley Her <shirley.her@bayhubtech.com>

commit 1ad9f88014ae1d5abccb6fe930bc4c5c311bdc05 upstream.

Force chip enter L0 power state during SDR104 HW tuning to avoid tuning failure

Signed-off-by: Shirley Her <shirley.her@bayhubtech.com>
Link: https://lore.kernel.org/r/20210206014051.3418-1-shirley.her@bayhubtech.com
Fixes: 7b7d897e8898 ("mmc: sdhci-pci-o2micro: Add HW tuning for SDR104 mode")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/host/sdhci-pci-o2micro.c |   20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
diff mbox series

Patch

--- a/drivers/mmc/host/sdhci-pci-o2micro.c
+++ b/drivers/mmc/host/sdhci-pci-o2micro.c
@@ -33,6 +33,8 @@ 
 #define O2_SD_ADMA2		0xE7
 #define O2_SD_INF_MOD		0xF1
 #define O2_SD_MISC_CTRL4	0xFC
+#define O2_SD_MISC_CTRL		0x1C0
+#define O2_SD_PWR_FORCE_L0	0x0002
 #define O2_SD_TUNING_CTRL	0x300
 #define O2_SD_PLL_SETTING	0x304
 #define O2_SD_MISC_SETTING	0x308
@@ -300,6 +302,8 @@  static int sdhci_o2_execute_tuning(struc
 {
 	struct sdhci_host *host = mmc_priv(mmc);
 	int current_bus_width = 0;
+	u32 scratch32 = 0;
+	u16 scratch = 0;
 
 	/*
 	 * This handler only implements the eMMC tuning that is specific to
@@ -312,6 +316,17 @@  static int sdhci_o2_execute_tuning(struc
 	if (WARN_ON((opcode != MMC_SEND_TUNING_BLOCK_HS200) &&
 			(opcode != MMC_SEND_TUNING_BLOCK)))
 		return -EINVAL;
+
+	/* Force power mode enter L0 */
+	scratch = sdhci_readw(host, O2_SD_MISC_CTRL);
+	scratch |= O2_SD_PWR_FORCE_L0;
+	sdhci_writew(host, scratch, O2_SD_MISC_CTRL);
+
+	/* wait DLL lock, timeout value 5ms */
+	if (readx_poll_timeout(sdhci_o2_pll_dll_wdt_control, host,
+		scratch32, (scratch32 & O2_DLL_LOCK_STATUS), 1, 5000))
+		pr_warn("%s: DLL can't lock in 5ms after force L0 during tuning.\n",
+				mmc_hostname(host->mmc));
 	/*
 	 * Judge the tuning reason, whether caused by dll shift
 	 * If cause by dll shift, should call sdhci_o2_dll_recovery
@@ -344,6 +359,11 @@  static int sdhci_o2_execute_tuning(struc
 		sdhci_set_bus_width(host, current_bus_width);
 	}
 
+	/* Cancel force power mode enter L0 */
+	scratch = sdhci_readw(host, O2_SD_MISC_CTRL);
+	scratch &= ~(O2_SD_PWR_FORCE_L0);
+	sdhci_writew(host, scratch, O2_SD_MISC_CTRL);
+
 	sdhci_reset(host, SDHCI_RESET_CMD);
 	sdhci_reset(host, SDHCI_RESET_DATA);