diff mbox series

[5.9,127/152] enetc: Let the hardware auto-advance the taprio base-time of 0

Message ID 20201201084728.444083960@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg Kroah-Hartman Dec. 1, 2020, 8:54 a.m. UTC
From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit 90cf87d16bd566cff40c2bc8e32e6d4cd3af23f0 ]

The tc-taprio base time indicates the beginning of the tc-taprio
schedule, which is cyclic by definition (where the length of the cycle
in nanoseconds is called the cycle time). The base time is a 64-bit PTP
time in the TAI domain.

Logically, the base-time should be a future time. But that imposes some
restrictions to user space, which has to retrieve the current PTP time
from the NIC first, then calculate a base time that will still be larger
than the base time by the time the kernel driver programs this value
into the hardware. Actually ensuring that the programmed base time is in
the future is still a problem even if the kernel alone deals with this.

Luckily, the enetc hardware already advances a base-time that is in the
past into a congruent time in the immediate future, according to the
same formula that can be found in the software implementation of taprio
(in taprio_get_start_time):

	/* Schedule the start time for the beginning of the next
	 * cycle.
	 */
	n = div64_s64(ktime_sub_ns(now, base), cycle);
	*start = ktime_add_ns(base, (n + 1) * cycle);

There's only one problem: the driver doesn't let the hardware do that.
It interferes with the base-time passed from user space, by special-casing
the situation when the base-time is zero, and replaces that with the
current PTP time. This changes the intended effective base-time of the
schedule, which will in the end have a different phase offset than if
the base-time of 0.000000000 was to be advanced by an integer multiple
of the cycle-time.

Fixes: 34c6adf1977b ("enetc: Configure the Time-Aware Scheduler via tc-taprio offload")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20201124220259.3027991-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/enetc/enetc_qos.c | 14 ++------------
 1 file changed, 2 insertions(+), 12 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/freescale/enetc/enetc_qos.c b/drivers/net/ethernet/freescale/enetc/enetc_qos.c
index 1c4a535890dac..9a91e3568adbf 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_qos.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_qos.c
@@ -95,18 +95,8 @@  static int enetc_setup_taprio(struct net_device *ndev,
 	gcl_config->atc = 0xff;
 	gcl_config->acl_len = cpu_to_le16(gcl_len);
 
-	if (!admin_conf->base_time) {
-		gcl_data->btl =
-			cpu_to_le32(enetc_rd(&priv->si->hw, ENETC_SICTR0));
-		gcl_data->bth =
-			cpu_to_le32(enetc_rd(&priv->si->hw, ENETC_SICTR1));
-	} else {
-		gcl_data->btl =
-			cpu_to_le32(lower_32_bits(admin_conf->base_time));
-		gcl_data->bth =
-			cpu_to_le32(upper_32_bits(admin_conf->base_time));
-	}
-
+	gcl_data->btl = cpu_to_le32(lower_32_bits(admin_conf->base_time));
+	gcl_data->bth = cpu_to_le32(upper_32_bits(admin_conf->base_time));
 	gcl_data->ct = cpu_to_le32(admin_conf->cycle_time);
 	gcl_data->cte = cpu_to_le32(admin_conf->cycle_time_extension);