diff mbox series

[5.9,222/252] regulator: pfuze100: limit pfuze-support-disable-sw to pfuze{100,200}

Message ID 20201123121846.285461461@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg KH Nov. 23, 2020, 12:22 p.m. UTC 
From: Sean Nyekjaer <sean@geanix.com>

commit 365ec8b61689bd64d6a61e129e0319bf71336407 upstream.

Limit the fsl,pfuze-support-disable-sw to the pfuze100 and pfuze200
variants.
When enabling fsl,pfuze-support-disable-sw and using a pfuze3000 or
pfuze3001, the driver would choose pfuze100_sw_disable_regulator_ops
instead of the newly introduced and correct pfuze3000_sw_regulator_ops.

Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Fixes: 6f1cf5257acc ("regualtor: pfuze100: correct sw1a/sw2 on pfuze3000")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201110174113.2066534-1-sean@geanix.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/regulator/pfuze100-regulator.c |   13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)
diff mbox series

Patch

--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -836,11 +836,14 @@  static int pfuze100_regulator_probe(stru
 		 * the switched regulator till yet.
 		 */
 		if (pfuze_chip->flags & PFUZE_FLAG_DISABLE_SW) {
-			if (pfuze_chip->regulator_descs[i].sw_reg) {
-				desc->ops = &pfuze100_sw_disable_regulator_ops;
-				desc->enable_val = 0x8;
-				desc->disable_val = 0x0;
-				desc->enable_time = 500;
+			if (pfuze_chip->chip_id == PFUZE100 ||
+				pfuze_chip->chip_id == PFUZE200) {
+				if (pfuze_chip->regulator_descs[i].sw_reg) {
+					desc->ops = &pfuze100_sw_disable_regulator_ops;
+					desc->enable_val = 0x8;
+					desc->disable_val = 0x0;
+					desc->enable_time = 500;
+				}
 			}
 		}