diff mbox series

[5.8,44/99] spi: spi-fsl-dspi: use XSPI mode instead of DMA for DPAA2 SoCs

Message ID 20200929105931.895912207@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg KH Sept. 29, 2020, 11:01 a.m. UTC 
From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit 505623a2be48b36de533951ced130876a76a2d55 ]

The arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi device tree lacks DMA
channels for DSPI, so naturally, the driver fails to probe:

[ 2.945302] fsl-dspi 2100000.spi: rx dma channel not available
[ 2.951134] fsl-dspi 2100000.spi: can't get dma channels

In retrospect, this should have been obvious, because LS2080A, LS2085A
LS2088A and LX2160A don't appear to have an eDMA module at all. Looking
again at their datasheets, the CTARE register (which is specific to XSPI
functionality) seems to be documented, so switch them to XSPI mode
instead.

Fixes: 0feaf8f5afe0 ("spi: spi-fsl-dspi: Convert the instantiations that support it to DMA")
Reported-by: Qiang Zhao <qiang.zhao@nxp.com>
Tested-by: Qiang Zhao <qiang.zhao@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200910121532.1138596-1-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-fsl-dspi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index 91c6affe139c9..283f2468a2f46 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -174,17 +174,17 @@  static const struct fsl_dspi_devtype_data devtype_data[] = {
 		.fifo_size		= 16,
 	},
 	[LS2080A] = {
-		.trans_mode		= DSPI_DMA_MODE,
+		.trans_mode		= DSPI_XSPI_MODE,
 		.max_clock_factor	= 8,
 		.fifo_size		= 4,
 	},
 	[LS2085A] = {
-		.trans_mode		= DSPI_DMA_MODE,
+		.trans_mode		= DSPI_XSPI_MODE,
 		.max_clock_factor	= 8,
 		.fifo_size		= 4,
 	},
 	[LX2160A] = {
-		.trans_mode		= DSPI_DMA_MODE,
+		.trans_mode		= DSPI_XSPI_MODE,
 		.max_clock_factor	= 8,
 		.fifo_size		= 4,
 	},