@@ -92,7 +92,7 @@ static inline unsigned int acpi_processo
if (boot_cpu_data.x86 == 0x0F &&
boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
boot_cpu_data.x86_model <= 0x05 &&
- boot_cpu_data.x86_mask < 0x0A)
+ boot_cpu_data.x86_stepping < 0x0A)
return 1;
else if (amd_e400_c1e_detected)
return 1;
@@ -88,7 +88,7 @@ struct cpuinfo_x86 {
__u8 x86; /* CPU family */
__u8 x86_vendor; /* CPU vendor */
__u8 x86_model;
- __u8 x86_mask;
+ __u8 x86_stepping;
#ifdef CONFIG_X86_32
char wp_works_ok; /* It doesn't on 386's */
@@ -105,7 +105,7 @@ int amd_cache_northbridges(void)
if (boot_cpu_data.x86 == 0x10 &&
boot_cpu_data.x86_model >= 0x8 &&
(boot_cpu_data.x86_model > 0x9 ||
- boot_cpu_data.x86_mask >= 0x1))
+ boot_cpu_data.x86_stepping >= 0x1))
amd_northbridges.flags |= AMD_NB_L3_INDEX_DISABLE;
if (boot_cpu_data.x86 == 0x15)
@@ -20,7 +20,7 @@ void foo(void)
OFFSET(CPUINFO_x86, cpuinfo_x86, x86);
OFFSET(CPUINFO_x86_vendor, cpuinfo_x86, x86_vendor);
OFFSET(CPUINFO_x86_model, cpuinfo_x86, x86_model);
- OFFSET(CPUINFO_x86_mask, cpuinfo_x86, x86_mask);
+ OFFSET(CPUINFO_x86_stepping, cpuinfo_x86, x86_stepping);
OFFSET(CPUINFO_cpuid_level, cpuinfo_x86, cpuid_level);
OFFSET(CPUINFO_x86_capability, cpuinfo_x86, x86_capability);
OFFSET(CPUINFO_x86_vendor_id, cpuinfo_x86, x86_vendor_id);
@@ -112,7 +112,7 @@ static void init_amd_k6(struct cpuinfo_x
return;
}
- if (c->x86_model == 6 && c->x86_mask == 1) {
+ if (c->x86_model == 6 && c->x86_stepping == 1) {
const int K6_BUG_LOOP = 1000000;
int n;
void (*f_vide)(void);
@@ -142,7 +142,7 @@ static void init_amd_k6(struct cpuinfo_x
/* K6 with old style WHCR */
if (c->x86_model < 8 ||
- (c->x86_model == 8 && c->x86_mask < 8)) {
+ (c->x86_model == 8 && c->x86_stepping < 8)) {
/* We can only write allocate on the low 508Mb */
if (mbytes > 508)
mbytes = 508;
@@ -161,7 +161,7 @@ static void init_amd_k6(struct cpuinfo_x
return;
}
- if ((c->x86_model == 8 && c->x86_mask > 7) ||
+ if ((c->x86_model == 8 && c->x86_stepping > 7) ||
c->x86_model == 9 || c->x86_model == 13) {
/* The more serious chips .. */
@@ -214,7 +214,7 @@ static void init_amd_k7(struct cpuinfo_x
* are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx
* As per AMD technical note 27212 0.2
*/
- if ((c->x86_model == 8 && c->x86_mask >= 1) || (c->x86_model > 8)) {
+ if ((c->x86_model == 8 && c->x86_stepping >= 1) || (c->x86_model > 8)) {
rdmsr(MSR_K7_CLK_CTL, l, h);
if ((l & 0xfff00000) != 0x20000000) {
printk(KERN_INFO
@@ -235,12 +235,12 @@ static void init_amd_k7(struct cpuinfo_x
* but they are not certified as MP capable.
*/
/* Athlon 660/661 is valid. */
- if ((c->x86_model == 6) && ((c->x86_mask == 0) ||
- (c->x86_mask == 1)))
+ if ((c->x86_model == 6) && ((c->x86_stepping == 0) ||
+ (c->x86_stepping == 1)))
return;
/* Duron 670 is valid */
- if ((c->x86_model == 7) && (c->x86_mask == 0))
+ if ((c->x86_model == 7) && (c->x86_stepping == 0))
return;
/*
@@ -250,8 +250,8 @@ static void init_amd_k7(struct cpuinfo_x
* See http://www.heise.de/newsticker/data/jow-18.10.01-000 for
* more.
*/
- if (((c->x86_model == 6) && (c->x86_mask >= 2)) ||
- ((c->x86_model == 7) && (c->x86_mask >= 1)) ||
+ if (((c->x86_model == 6) && (c->x86_stepping >= 2)) ||
+ ((c->x86_model == 7) && (c->x86_stepping >= 1)) ||
(c->x86_model > 7))
if (cpu_has(c, X86_FEATURE_MP))
return;
@@ -563,7 +563,7 @@ static void early_init_amd(struct cpuinf
/* Set MTRR capability flag if appropriate */
if (c->x86 == 5)
if (c->x86_model == 13 || c->x86_model == 9 ||
- (c->x86_model == 8 && c->x86_mask >= 8))
+ (c->x86_model == 8 && c->x86_stepping >= 8))
set_cpu_cap(c, X86_FEATURE_K6_MTRR);
#endif
#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_PCI)
@@ -902,11 +902,11 @@ static unsigned int amd_size_cache(struc
/* AMD errata T13 (order #21922) */
if ((c->x86 == 6)) {
/* Duron Rev A0 */
- if (c->x86_model == 3 && c->x86_mask == 0)
+ if (c->x86_model == 3 && c->x86_stepping == 0)
size = 64;
/* Tbird rev A1/A2 */
if (c->x86_model == 4 &&
- (c->x86_mask == 0 || c->x86_mask == 1))
+ (c->x86_stepping == 0 || c->x86_stepping == 1))
size = 256;
}
return size;
@@ -1043,7 +1043,7 @@ static bool cpu_has_amd_erratum(struct c
}
/* OSVW unavailable or ID unknown, match family-model-stepping range */
- ms = (cpu->x86_model << 4) | cpu->x86_mask;
+ ms = (cpu->x86_model << 4) | cpu->x86_stepping;
while ((range = *erratum++))
if ((cpu->x86 == AMD_MODEL_RANGE_FAMILY(range)) &&
(ms >= AMD_MODEL_RANGE_START(range)) &&
@@ -134,7 +134,7 @@ static void init_centaur(struct cpuinfo_
clear_cpu_cap(c, X86_FEATURE_TSC);
break;
case 8:
- switch (c->x86_mask) {
+ switch (c->x86_stepping) {
default:
name = "2";
break;
@@ -209,7 +209,7 @@ centaur_size_cache(struct cpuinfo_x86 *c
* - Note, it seems this may only be in engineering samples.
*/
if ((c->x86 == 6) && (c->x86_model == 9) &&
- (c->x86_mask == 1) && (size == 65))
+ (c->x86_stepping == 1) && (size == 65))
size -= 1;
return size;
}
@@ -652,7 +652,7 @@ void cpu_detect(struct cpuinfo_x86 *c)
cpuid(0x00000001, &tfms, &misc, &junk, &cap0);
c->x86 = (tfms >> 8) & 0xf;
c->x86_model = (tfms >> 4) & 0xf;
- c->x86_mask = tfms & 0xf;
+ c->x86_stepping = tfms & 0xf;
if (c->x86 == 0xf)
c->x86 += (tfms >> 20) & 0xff;
@@ -1157,7 +1157,7 @@ static void identify_cpu(struct cpuinfo_
c->loops_per_jiffy = loops_per_jiffy;
c->x86_cache_size = 0;
c->x86_vendor = X86_VENDOR_UNKNOWN;
- c->x86_model = c->x86_mask = 0; /* So far unknown... */
+ c->x86_model = c->x86_stepping = 0; /* So far unknown... */
c->x86_vendor_id[0] = '\0'; /* Unset */
c->x86_model_id[0] = '\0'; /* Unset */
c->x86_max_cores = 1;
@@ -1403,8 +1403,8 @@ void print_cpu_info(struct cpuinfo_x86 *
printk(KERN_CONT " (family: 0x%x, model: 0x%x", c->x86, c->x86_model);
- if (c->x86_mask || c->cpuid_level >= 0)
- printk(KERN_CONT ", stepping: 0x%x)\n", c->x86_mask);
+ if (c->x86_stepping || c->cpuid_level >= 0)
+ pr_cont(", stepping: 0x%x)\n", c->x86_stepping);
else
printk(KERN_CONT ")\n");
@@ -212,7 +212,7 @@ static void init_cyrix(struct cpuinfo_x8
/* common case step number/rev -- exceptions handled below */
c->x86_model = (dir1 >> 4) + 1;
- c->x86_mask = dir1 & 0xf;
+ c->x86_stepping = dir1 & 0xf;
/* Now cook; the original recipe is by Channing Corn, from Cyrix.
* We do the same thing for each generation: we work out
@@ -80,7 +80,7 @@ static bool bad_spectre_microcode(struct
for (i = 0; i < ARRAY_SIZE(spectre_bad_microcodes); i++) {
if (c->x86_model == spectre_bad_microcodes[i].model &&
- c->x86_mask == spectre_bad_microcodes[i].stepping)
+ c->x86_stepping == spectre_bad_microcodes[i].stepping)
return (c->microcode <= spectre_bad_microcodes[i].microcode);
}
return false;
@@ -130,7 +130,7 @@ static void early_init_intel(struct cpui
* need the microcode to have already been loaded... so if it is
* not, recommend a BIOS update and disable large pages.
*/
- if (c->x86 == 6 && c->x86_model == 0x1c && c->x86_mask <= 2 &&
+ if (c->x86 == 6 && c->x86_model == 0x1c && c->x86_stepping <= 2 &&
c->microcode < 0x20e) {
printk(KERN_WARNING "Atom PSE erratum detected, BIOS microcode update recommended\n");
clear_cpu_cap(c, X86_FEATURE_PSE);
@@ -146,7 +146,7 @@ static void early_init_intel(struct cpui
/* CPUID workaround for 0F33/0F34 CPU */
if (c->x86 == 0xF && c->x86_model == 0x3
- && (c->x86_mask == 0x3 || c->x86_mask == 0x4))
+ && (c->x86_stepping == 0x3 || c->x86_stepping == 0x4))
c->x86_phys_bits = 36;
/*
@@ -246,8 +246,8 @@ int ppro_with_ram_bug(void)
if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
boot_cpu_data.x86 == 6 &&
boot_cpu_data.x86_model == 1 &&
- boot_cpu_data.x86_mask < 8) {
- printk(KERN_INFO "Pentium Pro with Errata#50 detected. Taking evasive action.\n");
+ boot_cpu_data.x86_stepping < 8) {
+ pr_info("Pentium Pro with Errata#50 detected. Taking evasive action.\n");
return 1;
}
return 0;
@@ -263,7 +263,7 @@ static void intel_smp_check(struct cpuin
* Mask B, Pentium, but not Pentium MMX
*/
if (c->x86 == 5 &&
- c->x86_mask >= 1 && c->x86_mask <= 4 &&
+ c->x86_stepping >= 1 && c->x86_stepping <= 4 &&
c->x86_model <= 3) {
/*
* Remember we have B step Pentia with bugs
@@ -306,7 +306,7 @@ static void intel_workarounds(struct cpu
* SEP CPUID bug: Pentium Pro reports SEP but doesn't have it until
* model 3 mask 3
*/
- if ((c->x86<<8 | c->x86_model<<4 | c->x86_mask) < 0x633)
+ if ((c->x86<<8 | c->x86_model<<4 | c->x86_stepping) < 0x633)
clear_cpu_cap(c, X86_FEATURE_SEP);
/*
@@ -324,7 +324,7 @@ static void intel_workarounds(struct cpu
* P4 Xeon errata 037 workaround.
* Hardware prefetcher may cause stale data to be loaded into the cache.
*/
- if ((c->x86 == 15) && (c->x86_model == 1) && (c->x86_mask == 1)) {
+ if ((c->x86 == 15) && (c->x86_model == 1) && (c->x86_stepping == 1)) {
if (msr_set_bit(MSR_IA32_MISC_ENABLE,
MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE_BIT)
> 0) {
@@ -340,7 +340,7 @@ static void intel_workarounds(struct cpu
* Specification Update").
*/
if (cpu_has_apic && (c->x86<<8 | c->x86_model<<4) == 0x520 &&
- (c->x86_mask < 0x6 || c->x86_mask == 0xb))
+ (c->x86_stepping < 0x6 || c->x86_stepping == 0xb))
set_cpu_bug(c, X86_BUG_11AP);
@@ -555,7 +555,7 @@ static void init_intel(struct cpuinfo_x8
case 6:
if (l2 == 128)
p = "Celeron (Mendocino)";
- else if (c->x86_mask == 0 || c->x86_mask == 5)
+ else if (c->x86_stepping == 0 || c->x86_stepping == 5)
p = "Celeron-A";
break;
@@ -1013,7 +1013,7 @@ static bool is_blacklisted(unsigned int
*/
if (c->x86 == 6 &&
c->x86_model == 79 &&
- c->x86_mask == 0x01 &&
+ c->x86_stepping == 0x01 &&
llc_size_per_core > 2621440 &&
c->microcode < 0x0b000021) {
pr_err_once("Erratum BDF90: late loading with revision < 0x0b000021 (0x%x) disabled.\n", c->microcode);
@@ -1036,7 +1036,7 @@ static enum ucode_state request_microcod
return UCODE_NFOUND;
sprintf(name, "intel-ucode/%02x-%02x-%02x",
- c->x86, c->x86_model, c->x86_mask);
+ c->x86, c->x86_model, c->x86_stepping);
if (request_firmware_direct(&firmware, name, device)) {
pr_debug("data file %s load failed\n", name);
@@ -860,7 +860,7 @@ int generic_validate_add_page(unsigned l
*/
if (is_cpu(INTEL) && boot_cpu_data.x86 == 6 &&
boot_cpu_data.x86_model == 1 &&
- boot_cpu_data.x86_mask <= 7) {
+ boot_cpu_data.x86_stepping <= 7) {
if (base & ((1 << (22 - PAGE_SHIFT)) - 1)) {
pr_warning("mtrr: base(0x%lx000) is not 4 MiB aligned\n", base);
return -EINVAL;
@@ -699,8 +699,8 @@ void __init mtrr_bp_init(void)
if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
boot_cpu_data.x86 == 0xF &&
boot_cpu_data.x86_model == 0x3 &&
- (boot_cpu_data.x86_mask == 0x3 ||
- boot_cpu_data.x86_mask == 0x4))
+ (boot_cpu_data.x86_stepping == 0x3 ||
+ boot_cpu_data.x86_stepping == 0x4))
phys_addr = 36;
size_or_mask = SIZE_OR_MASK_BITS(phys_addr);
@@ -3052,7 +3052,7 @@ static int intel_snb_pebs_broken(int cpu
break;
case 45: /* SNB-EP */
- switch (cpu_data(cpu).x86_mask) {
+ switch (cpu_data(cpu).x86_stepping) {
case 6: rev = 0x618; break;
case 7: rev = 0x70c; break;
}
@@ -1017,7 +1017,7 @@ void __init intel_pmu_lbr_init_atom(void
* on PMU interrupt
*/
if (boot_cpu_data.x86_model == 28
- && boot_cpu_data.x86_mask < 10) {
+ && boot_cpu_data.x86_stepping < 10) {
pr_cont("LBR disabled due to erratum");
return;
}
@@ -233,7 +233,7 @@ static __initconst const struct x86_pmu
static __init void p6_pmu_rdpmc_quirk(void)
{
- if (boot_cpu_data.x86_mask < 9) {
+ if (boot_cpu_data.x86_stepping < 9) {
/*
* PPro erratum 26; fixed in stepping 9 and above.
*/
@@ -70,8 +70,8 @@ static int show_cpuinfo(struct seq_file
c->x86_model,
c->x86_model_id[0] ? c->x86_model_id : "unknown");
- if (c->x86_mask || c->cpuid_level >= 0)
- seq_printf(m, "stepping\t: %d\n", c->x86_mask);
+ if (c->x86_stepping || c->cpuid_level >= 0)
+ seq_printf(m, "stepping\t: %d\n", c->x86_stepping);
else
seq_puts(m, "stepping\t: unknown\n");
if (c->microcode)
@@ -34,7 +34,7 @@
#define X86 new_cpu_data+CPUINFO_x86
#define X86_VENDOR new_cpu_data+CPUINFO_x86_vendor
#define X86_MODEL new_cpu_data+CPUINFO_x86_model
-#define X86_MASK new_cpu_data+CPUINFO_x86_mask
+#define X86_STEPPING new_cpu_data+CPUINFO_x86_stepping
#define X86_HARD_MATH new_cpu_data+CPUINFO_hard_math
#define X86_CPUID new_cpu_data+CPUINFO_cpuid_level
#define X86_CAPABILITY new_cpu_data+CPUINFO_x86_capability
@@ -440,7 +440,7 @@ enable_paging:
shrb $4,%al
movb %al,X86_MODEL
andb $0x0f,%cl # mask mask revision
- movb %cl,X86_MASK
+ movb %cl,X86_STEPPING
movl %edx,X86_CAPABILITY
is486:
@@ -407,7 +407,7 @@ static inline void __init construct_defa
processor.apicver = mpc_default_type > 4 ? 0x10 : 0x01;
processor.cpuflag = CPU_ENABLED;
processor.cpufeature = (boot_cpu_data.x86 << 8) |
- (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask;
+ (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_stepping;
processor.featureflag = boot_cpu_data.x86_capability[0];
processor.reserved[0] = 0;
processor.reserved[1] = 0;
@@ -166,7 +166,7 @@ static int via_rng_init(struct hwrng *rn
/* Enable secondary noise source on CPUs where it is present. */
/* Nehemiah stepping 8 and higher */
- if ((c->x86_model == 9) && (c->x86_mask > 7))
+ if ((c->x86_model == 9) && (c->x86_stepping > 7))
lo |= VIA_NOISESRC2;
/* Esther */
@@ -639,7 +639,7 @@ static int acpi_cpufreq_blacklist(struct
if (c->x86_vendor == X86_VENDOR_INTEL) {
if ((c->x86 == 15) &&
(c->x86_model == 6) &&
- (c->x86_mask == 8)) {
+ (c->x86_stepping == 8)) {
printk(KERN_INFO "acpi-cpufreq: Intel(R) "
"Xeon(R) 7100 Errata AL30, processors may "
"lock up on frequency changes: disabling "
@@ -786,7 +786,7 @@ static int longhaul_cpu_init(struct cpuf
break;
case 7:
- switch (c->x86_mask) {
+ switch (c->x86_stepping) {
case 0:
longhaul_version = TYPE_LONGHAUL_V1;
cpu_model = CPU_SAMUEL2;
@@ -798,7 +798,7 @@ static int longhaul_cpu_init(struct cpuf
break;
case 1 ... 15:
longhaul_version = TYPE_LONGHAUL_V2;
- if (c->x86_mask < 8) {
+ if (c->x86_stepping < 8) {
cpu_model = CPU_SAMUEL2;
cpuname = "C3 'Samuel 2' [C5B]";
} else {
@@ -825,7 +825,7 @@ static int longhaul_cpu_init(struct cpuf
numscales = 32;
memcpy(mults, nehemiah_mults, sizeof(nehemiah_mults));
memcpy(eblcr, nehemiah_eblcr, sizeof(nehemiah_eblcr));
- switch (c->x86_mask) {
+ switch (c->x86_stepping) {
case 0 ... 1:
cpu_model = CPU_NEHEMIAH;
cpuname = "C3 'Nehemiah A' [C5XLOE]";
@@ -176,7 +176,7 @@ static int cpufreq_p4_cpu_init(struct cp
#endif
/* Errata workaround */
- cpuid = (c->x86 << 8) | (c->x86_model << 4) | c->x86_mask;
+ cpuid = (c->x86 << 8) | (c->x86_model << 4) | c->x86_stepping;
switch (cpuid) {
case 0x0f07:
case 0x0f0a:
@@ -132,7 +132,7 @@ static int check_powernow(void)
return 0;
}
- if ((c->x86_model == 6) && (c->x86_mask == 0)) {
+ if ((c->x86_model == 6) && (c->x86_stepping == 0)) {
printk(KERN_INFO PFX "K7 660[A0] core detected, "
"enabling errata workarounds\n");
have_a0 = 1;
@@ -36,7 +36,7 @@ struct cpu_id
{
__u8 x86; /* CPU family */
__u8 x86_model; /* model */
- __u8 x86_mask; /* stepping */
+ __u8 x86_stepping; /* stepping */
};
enum {
@@ -276,7 +276,7 @@ static int centrino_verify_cpu_id(const
{
if ((c->x86 == x->x86) &&
(c->x86_model == x->x86_model) &&
- (c->x86_mask == x->x86_mask))
+ (c->x86_stepping == x->x86_stepping))
return 1;
return 0;
}
@@ -270,9 +270,9 @@ unsigned int speedstep_detect_processor(
ebx = cpuid_ebx(0x00000001);
ebx &= 0x000000FF;
- pr_debug("ebx value is %x, x86_mask is %x\n", ebx, c->x86_mask);
+ pr_debug("ebx value is %x, x86_stepping is %x\n", ebx, c->x86_stepping);
- switch (c->x86_mask) {
+ switch (c->x86_stepping) {
case 4:
/*
* B-stepping [M-P4-M]
@@ -359,7 +359,7 @@ unsigned int speedstep_detect_processor(
msr_lo, msr_hi);
if ((msr_hi & (1<<18)) &&
(relaxed_check ? 1 : (msr_hi & (3<<24)))) {
- if (c->x86_mask == 0x01) {
+ if (c->x86_stepping == 0x01) {
pr_debug("early PIII version\n");
return SPEEDSTEP_CPU_PIII_C_EARLY;
} else
@@ -535,7 +535,7 @@ static int __init padlock_init(void)
printk(KERN_NOTICE PFX "Using VIA PadLock ACE for AES algorithm.\n");
- if (c->x86 == 6 && c->x86_model == 15 && c->x86_mask == 2) {
+ if (c->x86 == 6 && c->x86_model == 15 && c->x86_stepping == 2) {
ecb_fetch_blocks = MAX_ECB_FETCH_BLOCKS;
cbc_fetch_blocks = MAX_CBC_FETCH_BLOCKS;
printk(KERN_NOTICE PFX "VIA Nano stepping 2 detected: enabling workaround.\n");
@@ -2715,7 +2715,7 @@ static struct amd64_family_type *per_fam
struct amd64_family_type *fam_type = NULL;
pvt->ext_model = boot_cpu_data.x86_model >> 4;
- pvt->stepping = boot_cpu_data.x86_mask;
+ pvt->stepping = boot_cpu_data.x86_stepping;
pvt->model = boot_cpu_data.x86_model;
pvt->fam = boot_cpu_data.x86;
@@ -760,7 +760,7 @@ int amd_decode_mce(struct notifier_block
pr_emerg(HW_ERR "CPU:%d (%x:%x:%x) MC%d_STATUS[%s|%s|%s|%s|%s",
m->extcpu,
- c->x86, c->x86_model, c->x86_mask,
+ c->x86, c->x86_model, c->x86_stepping,
m->bank,
((m->status & MCI_STATUS_OVER) ? "Over" : "-"),
((m->status & MCI_STATUS_UC) ? "UE" :
@@ -269,13 +269,13 @@ static int adjust_tjmax(struct cpuinfo_x
for (i = 0; i < ARRAY_SIZE(tjmax_model_table); i++) {
const struct tjmax_model *tm = &tjmax_model_table[i];
if (c->x86_model == tm->model &&
- (tm->mask == ANY || c->x86_mask == tm->mask))
+ (tm->mask == ANY || c->x86_stepping == tm->mask))
return tm->tjmax;
}
/* Early chips have no MSR for TjMax */
- if (c->x86_model == 0xf && c->x86_mask < 4)
+ if (c->x86_model == 0xf && c->x86_stepping < 4)
usemsr_ee = 0;
if (c->x86_model > 0xe && usemsr_ee) {
@@ -426,7 +426,7 @@ static int chk_ucode_version(unsigned in
* Readings might stop update when processor visited too deep sleep,
* fixed for stepping D0 (6EC).
*/
- if (c->x86_model == 0xe && c->x86_mask < 0xc && c->microcode < 0x39) {
+ if (c->x86_model == 0xe && c->x86_stepping < 0xc && c->microcode < 0x39) {
pr_err("Errata AE18 not fixed, update BIOS or microcode of the CPU!\n");
return -ENODEV;
}
@@ -293,7 +293,7 @@ u8 vid_which_vrm(void)
if (c->x86 < 6) /* Any CPU with family lower than 6 */
return 0; /* doesn't have VID */
- vrm_ret = find_vrm(c->x86, c->x86_model, c->x86_mask, c->x86_vendor);
+ vrm_ret = find_vrm(c->x86, c->x86_model, c->x86_stepping, c->x86_vendor);
if (vrm_ret == 134)
vrm_ret = get_via_model_d_vrm();
if (vrm_ret == 0)
@@ -179,7 +179,7 @@ static bool has_erratum_319(struct pci_d
* and AM3 formats, but that's the best we can do.
*/
return boot_cpu_data.x86_model < 4 ||
- (boot_cpu_data.x86_model == 4 && boot_cpu_data.x86_mask <= 2);
+ (boot_cpu_data.x86_model == 4 && boot_cpu_data.x86_stepping <= 2);
}
static int k10temp_probe(struct pci_dev *pdev,
@@ -187,7 +187,7 @@ static int k8temp_probe(struct pci_dev *
return -ENOMEM;
model = boot_cpu_data.x86_model;
- stepping = boot_cpu_data.x86_mask;
+ stepping = boot_cpu_data.x86_stepping;
/* feature available since SH-C0, exclude older revisions */
if ((model == 4 && stepping == 0) ||
@@ -127,7 +127,7 @@ void gx_set_dclk_frequency(struct fb_inf
int timeout = 1000;
/* Rev. 1 Geode GXs use a 14 MHz reference clock instead of 48 MHz. */
- if (cpu_data(0).x86_mask == 1) {
+ if (cpu_data(0).x86_stepping == 1) {
pll_table = gx_pll_table_14MHz;
pll_table_len = ARRAY_SIZE(gx_pll_table_14MHz);
} else {