diff mbox series

[4.14,40/77] ARM: dts: bcm2835-rpi-zero-w: Fix led polarity

Message ID 20200601174023.622966561@linuxfoundation.org
State Superseded
Headers show
Series None | expand

Commit Message

Greg KH June 1, 2020, 5:53 p.m. UTC 
From: Vincent Stehlé <vincent.stehle@laposte.net>

[ Upstream commit 58bb90ab415562eededb932455046924e65df342 ]

The status "ACT" led on the Raspberry Pi Zero W is on when GPIO 47 is low.

This has been verified on a board and somewhat confirmed by both the GPIO
name ("STATUS_LED_N") and the reduced schematics [1].

[1]: https://www.raspberrypi.org/documentation/hardware/raspberrypi/schematics/rpi_SCH_ZeroW_1p1_reduced.pdf

Fixes: 2c7c040c73e9 ("ARM: dts: bcm2835: Add Raspberry Pi Zero W")
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
index e5f2cca86f04..120776d45441 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -25,7 +25,7 @@ 
 
 	leds {
 		act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
 		};
 	};