diff mbox series

[5.6,030/194] dpaa2-eth: properly handle buffer size restrictions

Message ID 20200518173534.050699985@linuxfoundation.org
State Superseded
Headers show
Series None | expand

Commit Message

Greg KH May 18, 2020, 5:35 p.m. UTC 
From: Ioana Ciornei <ioana.ciornei@nxp.com>

[ Upstream commit efa6a7d07523ffbbf6503c1a7eeb52201c15c0e3 ]

Depending on the WRIOP version, the buffer size on the RX path must by a
multiple of 64 or 256. Handle this restriction properly by aligning down
the buffer size to the necessary value. Also, use the new buffer size
dynamically computed instead of the compile time one.

Fixes: 27c874867c4e ("dpaa2-eth: Use a single page per Rx buffer")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c |   29 +++++++++++++----------
 drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h |    1 
 2 files changed, 18 insertions(+), 12 deletions(-)
diff mbox series

Patch

--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
@@ -86,7 +86,7 @@  static void free_rx_fd(struct dpaa2_eth_
 	for (i = 1; i < DPAA2_ETH_MAX_SG_ENTRIES; i++) {
 		addr = dpaa2_sg_get_addr(&sgt[i]);
 		sg_vaddr = dpaa2_iova_to_virt(priv->iommu_domain, addr);
-		dma_unmap_page(dev, addr, DPAA2_ETH_RX_BUF_SIZE,
+		dma_unmap_page(dev, addr, priv->rx_buf_size,
 			       DMA_BIDIRECTIONAL);
 
 		free_pages((unsigned long)sg_vaddr, 0);
@@ -144,7 +144,7 @@  static struct sk_buff *build_frag_skb(st
 		/* Get the address and length from the S/G entry */
 		sg_addr = dpaa2_sg_get_addr(sge);
 		sg_vaddr = dpaa2_iova_to_virt(priv->iommu_domain, sg_addr);
-		dma_unmap_page(dev, sg_addr, DPAA2_ETH_RX_BUF_SIZE,
+		dma_unmap_page(dev, sg_addr, priv->rx_buf_size,
 			       DMA_BIDIRECTIONAL);
 
 		sg_length = dpaa2_sg_get_len(sge);
@@ -185,7 +185,7 @@  static struct sk_buff *build_frag_skb(st
 				(page_address(page) - page_address(head_page));
 
 			skb_add_rx_frag(skb, i - 1, head_page, page_offset,
-					sg_length, DPAA2_ETH_RX_BUF_SIZE);
+					sg_length, priv->rx_buf_size);
 		}
 
 		if (dpaa2_sg_is_final(sge))
@@ -211,7 +211,7 @@  static void free_bufs(struct dpaa2_eth_p
 
 	for (i = 0; i < count; i++) {
 		vaddr = dpaa2_iova_to_virt(priv->iommu_domain, buf_array[i]);
-		dma_unmap_page(dev, buf_array[i], DPAA2_ETH_RX_BUF_SIZE,
+		dma_unmap_page(dev, buf_array[i], priv->rx_buf_size,
 			       DMA_BIDIRECTIONAL);
 		free_pages((unsigned long)vaddr, 0);
 	}
@@ -335,7 +335,7 @@  static u32 run_xdp(struct dpaa2_eth_priv
 		break;
 	case XDP_REDIRECT:
 		dma_unmap_page(priv->net_dev->dev.parent, addr,
-			       DPAA2_ETH_RX_BUF_SIZE, DMA_BIDIRECTIONAL);
+			       priv->rx_buf_size, DMA_BIDIRECTIONAL);
 		ch->buf_count--;
 		xdp.data_hard_start = vaddr;
 		err = xdp_do_redirect(priv->net_dev, &xdp, xdp_prog);
@@ -374,7 +374,7 @@  static void dpaa2_eth_rx(struct dpaa2_et
 	trace_dpaa2_rx_fd(priv->net_dev, fd);
 
 	vaddr = dpaa2_iova_to_virt(priv->iommu_domain, addr);
-	dma_sync_single_for_cpu(dev, addr, DPAA2_ETH_RX_BUF_SIZE,
+	dma_sync_single_for_cpu(dev, addr, priv->rx_buf_size,
 				DMA_BIDIRECTIONAL);
 
 	fas = dpaa2_get_fas(vaddr, false);
@@ -393,13 +393,13 @@  static void dpaa2_eth_rx(struct dpaa2_et
 			return;
 		}
 
-		dma_unmap_page(dev, addr, DPAA2_ETH_RX_BUF_SIZE,
+		dma_unmap_page(dev, addr, priv->rx_buf_size,
 			       DMA_BIDIRECTIONAL);
 		skb = build_linear_skb(ch, fd, vaddr);
 	} else if (fd_format == dpaa2_fd_sg) {
 		WARN_ON(priv->xdp_prog);
 
-		dma_unmap_page(dev, addr, DPAA2_ETH_RX_BUF_SIZE,
+		dma_unmap_page(dev, addr, priv->rx_buf_size,
 			       DMA_BIDIRECTIONAL);
 		skb = build_frag_skb(priv, ch, buf_data);
 		free_pages((unsigned long)vaddr, 0);
@@ -974,7 +974,7 @@  static int add_bufs(struct dpaa2_eth_pri
 		if (!page)
 			goto err_alloc;
 
-		addr = dma_map_page(dev, page, 0, DPAA2_ETH_RX_BUF_SIZE,
+		addr = dma_map_page(dev, page, 0, priv->rx_buf_size,
 				    DMA_BIDIRECTIONAL);
 		if (unlikely(dma_mapping_error(dev, addr)))
 			goto err_map;
@@ -984,7 +984,7 @@  static int add_bufs(struct dpaa2_eth_pri
 		/* tracing point */
 		trace_dpaa2_eth_buf_seed(priv->net_dev,
 					 page, DPAA2_ETH_RX_BUF_RAW_SIZE,
-					 addr, DPAA2_ETH_RX_BUF_SIZE,
+					 addr, priv->rx_buf_size,
 					 bpid);
 	}
 
@@ -1715,7 +1715,7 @@  static bool xdp_mtu_valid(struct dpaa2_e
 	int mfl, linear_mfl;
 
 	mfl = DPAA2_ETH_L2_MAX_FRM(mtu);
-	linear_mfl = DPAA2_ETH_RX_BUF_SIZE - DPAA2_ETH_RX_HWA_SIZE -
+	linear_mfl = priv->rx_buf_size - DPAA2_ETH_RX_HWA_SIZE -
 		     dpaa2_eth_rx_head_room(priv) - XDP_PACKET_HEADROOM;
 
 	if (mfl > linear_mfl) {
@@ -2457,6 +2457,11 @@  static int set_buffer_layout(struct dpaa
 	else
 		rx_buf_align = DPAA2_ETH_RX_BUF_ALIGN;
 
+	/* We need to ensure that the buffer size seen by WRIOP is a multiple
+	 * of 64 or 256 bytes depending on the WRIOP version.
+	 */
+	priv->rx_buf_size = ALIGN_DOWN(DPAA2_ETH_RX_BUF_SIZE, rx_buf_align);
+
 	/* tx buffer */
 	buf_layout.private_data_size = DPAA2_ETH_SWA_SIZE;
 	buf_layout.pass_timestamp = true;
@@ -3121,7 +3126,7 @@  static int bind_dpni(struct dpaa2_eth_pr
 	pools_params.num_dpbp = 1;
 	pools_params.pools[0].dpbp_id = priv->dpbp_dev->obj_desc.id;
 	pools_params.pools[0].backup_pool = 0;
-	pools_params.pools[0].buffer_size = DPAA2_ETH_RX_BUF_SIZE;
+	pools_params.pools[0].buffer_size = priv->rx_buf_size;
 	err = dpni_set_pools(priv->mc_io, 0, priv->mc_token, &pools_params);
 	if (err) {
 		dev_err(dev, "dpni_set_pools() failed\n");
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
@@ -382,6 +382,7 @@  struct dpaa2_eth_priv {
 	u16 tx_data_offset;
 
 	struct fsl_mc_device *dpbp_dev;
+	u16 rx_buf_size;
 	u16 bpid;
 	struct iommu_domain *iommu_domain;