diff mbox series

[5.4,109/168] ALSA: hda/realtek - Fix unexpected init_amp override

Message ID 20200428182246.288982582@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg KH April 28, 2020, 6:24 p.m. UTC 
From: Takashi Iwai <tiwai@suse.de>

commit 67791202c5e069cf2ba51db0718d56c634709e78 upstream.

The commit 1c76aa5fb48d ("ALSA: hda/realtek - Allow skipping
spec->init_amp detection") changed the way to assign spec->init_amp
field that specifies the way to initialize the amp.  Along with the
change, the commit also replaced a few fixups that set spec->init_amp
in HDA_FIXUP_ACT_PROBE with HDA_FIXUP_ACT_PRE_PROBE.  This was rather
aligning to the other fixups, and not supposed to change the actual
behavior.

However, this change turned out to cause a regression on FSC S7020,
which hit exactly the above.  The reason was that there is still one
place that overrides spec->init_amp after HDA_FIXUP_ACT_PRE_PROBE
call, namely in alc_ssid_check().

This patch fixes the regression by adding the proper spec->init_amp
override check, i.e. verifying whether it's still ALC_INIT_UNDEFINED.

Fixes: 1c76aa5fb48d ("ALSA: hda/realtek - Allow skipping spec->init_amp detection")
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207329
Link: https://lore.kernel.org/r/20200418190639.10082-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_realtek.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
diff mbox series

Patch

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -789,9 +789,11 @@  static void alc_ssid_check(struct hda_co
 {
 	if (!alc_subsystem_id(codec, ports)) {
 		struct alc_spec *spec = codec->spec;
-		codec_dbg(codec,
-			  "realtek: Enable default setup for auto mode as fallback\n");
-		spec->init_amp = ALC_INIT_DEFAULT;
+		if (spec->init_amp == ALC_INIT_UNDEFINED) {
+			codec_dbg(codec,
+				  "realtek: Enable default setup for auto mode as fallback\n");
+			spec->init_amp = ALC_INIT_DEFAULT;
+		}
 	}
 }