diff mbox series

[4.19,26/70] ARM: dts: am57xx-beagle-x15/am57xx-idk: Remove "gpios" for endpoint dt nodes

Message ID 20200203161916.330745792@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg Kroah-Hartman Feb. 3, 2020, 4:19 p.m. UTC 
From: Kishon Vijay Abraham I <kishon@ti.com>

[ Upstream commit 81cc0877840f72210e809bbedd6346d686560fc1 ]

PERST# line in the PCIE connector is driven by the host mode and not
EP mode. The gpios property here is used for driving the PERST# line.
Remove gpios property from all endpoint device tree nodes.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/am571x-idk.dts                | 4 ----
 arch/arm/boot/dts/am572x-idk-common.dtsi        | 4 ----
 arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi | 4 ----
 3 files changed, 12 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
index bf4163eb6b2ac..510f61d20b6d6 100644
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -93,10 +93,6 @@ 
 	gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
 };
 
-&pcie1_ep {
-	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
 &mmc1 {
 	pinctrl-names = "default", "hs";
 	pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
diff --git a/arch/arm/boot/dts/am572x-idk-common.dtsi b/arch/arm/boot/dts/am572x-idk-common.dtsi
index 784639ddf4513..8a7d34c8ae115 100644
--- a/arch/arm/boot/dts/am572x-idk-common.dtsi
+++ b/arch/arm/boot/dts/am572x-idk-common.dtsi
@@ -71,10 +71,6 @@ 
 	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
 };
 
-&pcie1_ep {
-	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
 &mailbox5 {
 	status = "okay";
 	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
index d53532b479475..872382bd043f8 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -550,10 +550,6 @@ 
 	gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
 };
 
-&pcie1_ep {
-	gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
-};
-
 &mcasp3 {
 	#sound-dai-cells = <0>;
 	assigned-clocks = <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 24>;