diff mbox series

[v42,08/98] hw/sd/sdcard: Send NUM_WR_BLOCKS bits MSB first (ACMD22)

Message ID 20240628070216.92609-9-philmd@linaro.org
State Superseded
Headers show
Series hw/sd/sdcard: Add eMMC support | expand

Commit Message

Philippe Mathieu-Daudé June 28, 2024, 7 a.m. UTC 
Per sections 3.6.1 (SD Bus Protocol), 4.3.4 "Data Write"
and 7.3.2 (Responses):

  In the CMD line the Most Significant Bit is transmitted first.

Use the stl_be_p() helper to store the value in big-endian.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
---
RFC because I'm surprised this has been unnoticed for 17 years
(commit a1bb27b1e9 "initial SD card emulation", April 2007).

Cc: Peter Maydell <peter.maydell@linaro.org>
---
 hw/sd/sd.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

Comments

Peter Maydell July 1, 2024, 4 p.m. UTC | #1 
On Fri, 28 Jun 2024 at 08:05, Philippe Mathieu-Daudé <philmd@linaro.org> wrote:
>
> Per sections 3.6.1 (SD Bus Protocol), 4.3.4 "Data Write"
> and 7.3.2 (Responses):
>
>   In the CMD line the Most Significant Bit is transmitted first.
>
> Use the stl_be_p() helper to store the value in big-endian.
>
> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
> Tested-by: Cédric Le Goater <clg@redhat.com>
> ---
> RFC because I'm surprised this has been unnoticed for 17 years
> (commit a1bb27b1e9 "initial SD card emulation", April 2007).
>
> Cc: Peter Maydell <peter.maydell@linaro.org>
> ---
>  hw/sd/sd.c | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)

I think Linux only uses this command in an error-recovery
code path (which we should never get into since our
emulated SD card has 100% reliability ;-)), which is
probably why we haven't noticed this before.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

thanks
-- PMM
diff mbox series

Patch

diff --git a/hw/sd/sd.c b/hw/sd/sd.c
index 4e09640852..1f37d9c93a 100644
--- a/hw/sd/sd.c
+++ b/hw/sd/sd.c
@@ -1668,8 +1668,7 @@  static sd_rsp_type_t sd_app_command(SDState *sd,
     case 22:  /* ACMD22: SEND_NUM_WR_BLOCKS */
         switch (sd->state) {
         case sd_transfer_state:
-            *(uint32_t *) sd->data = sd->blk_written;
-
+            stl_be_p(sd->data, sd->blk_written);
             sd->state = sd_sendingdata_state;
             sd->data_start = 0;
             sd->data_offset = 0;