diff mbox series

[PULL,13/37] hw/intc/arm_gicv3: Add has-nmi property to GICv3 device

Message ID 20240425103958.3237225-14-peter.maydell@linaro.org
State Not Applicable
Headers show
Series [PULL,01/37] target/arm: Handle HCR_EL2 accesses for bits introduced with FEAT_NMI | expand

Commit Message

Peter Maydell April 25, 2024, 10:39 a.m. UTC 
From: Jinjie Ruan <ruanjinjie@huawei.com>

Add a property has-nmi to the GICv3 device, and use this to set
the NMI bit in the GICD_TYPER register. This isn't visible to
guests yet because the property defaults to false and we won't
set it in the board code until we've landed all of the changes
needed to implement FEAT_GICV3_NMI.

Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-14-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/intc/gicv3_internal.h           | 1 +
 include/hw/intc/arm_gicv3_common.h | 1 +
 hw/intc/arm_gicv3_common.c         | 1 +
 hw/intc/arm_gicv3_dist.c           | 2 ++
 4 files changed, 5 insertions(+)
diff mbox series

Patch

diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h
index 29d5cdc1b69..8f4ebed2f42 100644
--- a/hw/intc/gicv3_internal.h
+++ b/hw/intc/gicv3_internal.h
@@ -68,6 +68,7 @@ 
 #define GICD_CTLR_E1NWF             (1U << 7)
 #define GICD_CTLR_RWP               (1U << 31)
 
+#define GICD_TYPER_NMI_SHIFT           9
 #define GICD_TYPER_LPIS_SHIFT          17
 
 /* 16 bits EventId */
diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h
index 7324c7d983f..4358c5319c1 100644
--- a/include/hw/intc/arm_gicv3_common.h
+++ b/include/hw/intc/arm_gicv3_common.h
@@ -249,6 +249,7 @@  struct GICv3State {
     uint32_t num_irq;
     uint32_t revision;
     bool lpi_enable;
+    bool nmi_support;
     bool security_extn;
     bool force_8bit_prio;
     bool irq_reset_nonsecure;
diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c
index c52f060026a..2d2cea6858a 100644
--- a/hw/intc/arm_gicv3_common.c
+++ b/hw/intc/arm_gicv3_common.c
@@ -569,6 +569,7 @@  static Property arm_gicv3_common_properties[] = {
     DEFINE_PROP_UINT32("num-irq", GICv3State, num_irq, 32),
     DEFINE_PROP_UINT32("revision", GICv3State, revision, 3),
     DEFINE_PROP_BOOL("has-lpi", GICv3State, lpi_enable, 0),
+    DEFINE_PROP_BOOL("has-nmi", GICv3State, nmi_support, 0),
     DEFINE_PROP_BOOL("has-security-extensions", GICv3State, security_extn, 0),
     /*
      * Compatibility property: force 8 bits of physical priority, even
diff --git a/hw/intc/arm_gicv3_dist.c b/hw/intc/arm_gicv3_dist.c
index 35e850685c0..22ddc0d6661 100644
--- a/hw/intc/arm_gicv3_dist.c
+++ b/hw/intc/arm_gicv3_dist.c
@@ -389,6 +389,7 @@  static bool gicd_readl(GICv3State *s, hwaddr offset,
          *                      by GICD_TYPER.IDbits)
          * MBIS == 0 (message-based SPIs not supported)
          * SecurityExtn == 1 if security extns supported
+         * NMI = 1 if Non-maskable interrupt property is supported
          * CPUNumber == 0 since for us ARE is always 1
          * ITLinesNumber == (((max SPI IntID + 1) / 32) - 1)
          */
@@ -402,6 +403,7 @@  static bool gicd_readl(GICv3State *s, hwaddr offset,
         bool dvis = s->revision >= 4;
 
         *data = (1 << 25) | (1 << 24) | (dvis << 18) | (sec_extn << 10) |
+            (s->nmi_support << GICD_TYPER_NMI_SHIFT) |
             (s->lpi_enable << GICD_TYPER_LPIS_SHIFT) |
             (0xf << 19) | itlinesnumber;
         return true;