From patchwork Fri Mar 8 15:50:10 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Peter Maydell X-Patchwork-Id: 778821 Delivered-To: patch@linaro.org Received: by 2002:a5d:604e:0:b0:33e:7753:30bd with SMTP id j14csp336068wrt; Fri, 8 Mar 2024 07:51:43 -0800 (PST) X-Forwarded-Encrypted: i=2; AJvYcCU+WEag+3Z4ImswXvLKzxmJzSqGw2RrWdT0TRbSOlvLbs4Bd+j3hVmNDTFze1+hhcBTAX/i02+WiYrXO5UtF10D X-Google-Smtp-Source: AGHT+IFIqTMDS71HKgzXxi5lARuZtxbSUXTrJTKSHT/pDmAuAuzG0vD5D4A4NZhLru8qcVKmwuD7 X-Received: by 2002:a05:6871:7295:b0:221:373b:61e with SMTP id mm21-20020a056871729500b00221373b061emr3145567oac.34.1709913103505; Fri, 08 Mar 2024 07:51:43 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1709913103; cv=none; d=google.com; s=arc-20160816; b=KcExCRFoYQc2A20dPdm0AqPFGhltdF9Jvf/fGI3voi6ZzXZttbZzvToX9wevoe8vw5 zQ1aYuSHydxQ2HRCUElFn+ykuhIYW1M/TxBynYb1cTP1HerdB2YnnQXQ3aJwKrc1geS/ Xs5lIiexFAQJdEplWF9xU+uKAxshL7LxrlKXr42X5BZWzulOm9mnahqQgsR9KtDVIU8D TPDWMMLeQpmERM/bTywBQIPPl/zruQjJTT7W/7fkZQ7MbUx9f9PGd5n69eZzyRwwCBFQ 5SRSdkNinxnUzBRFkBtddiCxT7F8teKO2esKyhm6kt7vC2LjAqo3361HkFEioM8/xKNh ihMA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=sender:errors-to:list-subscribe:list-help:list-post:list-archive :list-unsubscribe:list-id:precedence:content-transfer-encoding :mime-version:references:in-reply-to:message-id:date:subject:to:from :dkim-signature; bh=R9JSKRpCPp7qaF+0ucL8c3wtTbO7O1swM8G0dg1s+uo=; fh=PnYt+qEB9tAfMKoqBm2xjKOFpYyFFGPudh5cVIoieJM=; b=YotDJS16o0zcrricQOxGNRT8o0t0lk/16N0kSw80UM0NrEaZQyitmhbMTdt33OJsaj 2MeHHFfUXd8/1PabUiZmAjTkscYd9+w8j9hU5iVRnRPncfIx+Rk2R72LfBfkqrLacnmb VCrFJ4M99tPR3xjOR81PTjrpU0bhvWvqTBHVjugt5LDKqqvZ/5nbH/td/16dZnwzyNU2 bgwYsVxFq5ZIKddqHaNQzXAOAFGpeDsiHAFdrYOYapL4GeLUKqoFSeek09yzXpj1TRQ8 VLl+5YfSgyai0K+s1FmhUC+UzMnuVb6iEEpEio3AHd2JvgRYPdWsXn2aTkvXhv4mAgiM O59Q==; dara=google.com ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=t88aaPUp; spf=pass (google.com: domain of qemu-devel-bounces+patch=linaro.org@nongnu.org designates 209.51.188.17 as permitted sender) smtp.mailfrom="qemu-devel-bounces+patch=linaro.org@nongnu.org"; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from lists.gnu.org (lists.gnu.org. [209.51.188.17]) by mx.google.com with ESMTPS id s21-20020a05622a019500b0042edef63d2csi14521723qtw.59.2024.03.08.07.51.43 for (version=TLS1_2 cipher=ECDHE-ECDSA-CHACHA20-POLY1305 bits=256/256); Fri, 08 Mar 2024 07:51:43 -0800 (PST) Received-SPF: pass (google.com: domain of qemu-devel-bounces+patch=linaro.org@nongnu.org designates 209.51.188.17 as permitted sender) client-ip=209.51.188.17; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=t88aaPUp; spf=pass (google.com: domain of qemu-devel-bounces+patch=linaro.org@nongnu.org designates 209.51.188.17 as permitted sender) smtp.mailfrom="qemu-devel-bounces+patch=linaro.org@nongnu.org"; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from localhost ([::1] helo=lists1p.gnu.org) by lists.gnu.org with esmtp (Exim 4.90_1) (envelope-from ) id 1ricUs-0000Yo-L3; Fri, 08 Mar 2024 10:50:58 -0500 Received: from eggs.gnu.org ([2001:470:142:3::10]) by lists.gnu.org with esmtps (TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.90_1) (envelope-from ) id 1ricUT-0008Ic-Ra for qemu-devel@nongnu.org; Fri, 08 Mar 2024 10:50:33 -0500 Received: from mail-wr1-x435.google.com ([2a00:1450:4864:20::435]) by eggs.gnu.org with esmtps (TLS1.2:ECDHE_RSA_AES_128_GCM_SHA256:128) (Exim 4.90_1) (envelope-from ) id 1ricUI-0004Se-Fo for qemu-devel@nongnu.org; Fri, 08 Mar 2024 10:50:33 -0500 Received: by mail-wr1-x435.google.com with SMTP id ffacd0b85a97d-33e7ae72312so209765f8f.1 for ; Fri, 08 Mar 2024 07:50:21 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1709913021; x=1710517821; darn=nongnu.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:to:from:from:to:cc:subject:date:message-id :reply-to; bh=R9JSKRpCPp7qaF+0ucL8c3wtTbO7O1swM8G0dg1s+uo=; b=t88aaPUpocQYzdaXga4wUn5F1dQzUpe+88ctOEYJljW11LkstWlHnMgJUleo/9hoRb ElWCUWNP5wpRCFavU62JtsePAgfPt7U6LN3wYcoqXwjbSPFq+MxJ/waq3Mgab+0n5iGE 1t1PyxLsWKXUism+Xn/mo9lYgsGfdf+1Rvc4HGnVanyUB9JX6AQiYEMwsq4dVJ4oOCSR X6IFGvCqx5ofd78ixSBwrcAo7cafruEyJzRHZYR+My0LIcziQYmgzWO/lraF077LPjLT DB8L+3uSr7uXdSR5g1CToYJFs936+L2R0TIzE11A/M8j17oMCM6cJiFOLWxlUX753G5I 0mpA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1709913021; x=1710517821; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=R9JSKRpCPp7qaF+0ucL8c3wtTbO7O1swM8G0dg1s+uo=; b=d5ojN0FNR2Ls6DASL64yV6DVVX+APYu6LZH7EyQaszfn8wNXSy5XOROGabKllaG9rG 5bxpZKw/bUSPvwWec8qwt112MFZY+2Cj0KnaP1ddcpDS74RjIT3YwiPR5n6PfaFJSM1E tX+LeBsOqyH86k5elORn980mlUDjf37a3XnmZjZB6MB+aBbRdLGbefO7TXvG7Iji1K33 AD0whQzGnpFPSGjBDtcZuHQNzaQeUUaDyKN2Tjcbv0W7uJ/cpaFBN0NycnqTTZPm6IZj jgXQcMkYDXtybUIcaEMOlzmf/4pZD43wBrCI7cS38yZnMvVH5td0/1HH7XGsiuvEbL19 +XMg== X-Gm-Message-State: AOJu0Yx+dRLG4g0QFMacO/aTrOYoOUjpp1htITMns7gdqstWL3JuYDA9 VDJn/2SV9VJt1XFW1/PPyUMAsO6a01RMEVl7bBYzGjX9RtXGO1JpQzpXKMZuKAfZI+1ATtfSUAX V X-Received: by 2002:adf:ee08:0:b0:33d:ca56:a61f with SMTP id y8-20020adfee08000000b0033dca56a61fmr15556344wrn.49.1709913020648; Fri, 08 Mar 2024 07:50:20 -0800 (PST) Received: from orth.archaic.org.uk (orth.archaic.org.uk. [2001:8b0:1d0::2]) by smtp.gmail.com with ESMTPSA id f2-20020adff8c2000000b0033e7a204dc7sm856080wrq.32.2024.03.08.07.50.20 for (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 08 Mar 2024 07:50:20 -0800 (PST) From: Peter Maydell To: qemu-devel@nongnu.org Subject: [PULL 09/14] hw/gpio: Implement STM32L4x5 GPIO Date: Fri, 8 Mar 2024 15:50:10 +0000 Message-Id: <20240308155015.3637663-10-peter.maydell@linaro.org> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20240308155015.3637663-1-peter.maydell@linaro.org> References: <20240308155015.3637663-1-peter.maydell@linaro.org> MIME-Version: 1.0 Received-SPF: pass client-ip=2a00:1450:4864:20::435; envelope-from=peter.maydell@linaro.org; helo=mail-wr1-x435.google.com X-Spam_score_int: -20 X-Spam_score: -2.1 X-Spam_bar: -- X-Spam_report: (-2.1 / 5.0 requ) BAYES_00=-1.9, DKIM_SIGNED=0.1, DKIM_VALID=-0.1, DKIM_VALID_AU=-0.1, DKIM_VALID_EF=-0.1, RCVD_IN_DNSWL_NONE=-0.0001, SPF_HELO_NONE=0.001, SPF_PASS=-0.001, T_SCC_BODY_TEXT_LINE=-0.01, WEIRD_QUOTING=0.001 autolearn=ham autolearn_force=no X-Spam_action: no action X-BeenThere: qemu-devel@nongnu.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: qemu-devel-bounces+patch=linaro.org@nongnu.org Sender: qemu-devel-bounces+patch=linaro.org@nongnu.org From: Inès Varhol Features supported : - the 8 STM32L4x5 GPIOs are initialized with their reset values (except IDR, see below) - input mode : setting a pin in input mode "externally" (using input irqs) results in an out irq (transmitted to SYSCFG) - output mode : setting a bit in ODR sets the corresponding out irq (if this line is configured in output mode) - pull-up, pull-down - push-pull, open-drain Difference with the real GPIOs : - Alternate Function and Analog mode aren't implemented : pins in AF/Analog behave like pins in input mode - floating pins stay at their last value - register IDR reset values differ from the real one : values are coherent with the other registers reset values and the fact that AF/Analog modes aren't implemented - setting I/O output speed isn't supported - locking port bits isn't supported - ADC function isn't supported - GPIOH has 16 pins instead of 2 pins - writing to registers LCKR, AFRL, AFRH and ASCR is ineffective Signed-off-by: Arnaud Minier Signed-off-by: Inès Varhol Reviewed-by: Philippe Mathieu-Daudé Acked-by: Alistair Francis Message-id: 20240305210444.310665-2-ines.varhol@telecom-paris.fr Signed-off-by: Peter Maydell --- MAINTAINERS | 1 + docs/system/arm/b-l475e-iot01a.rst | 2 +- include/hw/gpio/stm32l4x5_gpio.h | 70 +++++ hw/gpio/stm32l4x5_gpio.c | 477 +++++++++++++++++++++++++++++ hw/gpio/Kconfig | 3 + hw/gpio/meson.build | 1 + hw/gpio/trace-events | 6 + 7 files changed, 559 insertions(+), 1 deletion(-) create mode 100644 include/hw/gpio/stm32l4x5_gpio.h create mode 100644 hw/gpio/stm32l4x5_gpio.c diff --git a/MAINTAINERS b/MAINTAINERS index 4183f2f3abb..4d96f855de5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1133,6 +1133,7 @@ F: hw/arm/stm32l4x5_soc.c F: hw/misc/stm32l4x5_exti.c F: hw/misc/stm32l4x5_syscfg.c F: hw/misc/stm32l4x5_rcc.c +F: hw/gpio/stm32l4x5_gpio.c F: include/hw/*/stm32l4x5_*.h B-L475E-IOT01A IoT Node diff --git a/docs/system/arm/b-l475e-iot01a.rst b/docs/system/arm/b-l475e-iot01a.rst index b857a56ca4e..0afef8e4f45 100644 --- a/docs/system/arm/b-l475e-iot01a.rst +++ b/docs/system/arm/b-l475e-iot01a.rst @@ -18,6 +18,7 @@ Currently B-L475E-IOT01A machine's only supports the following devices: - STM32L4x5 EXTI (Extended interrupts and events controller) - STM32L4x5 SYSCFG (System configuration controller) - STM32L4x5 RCC (Reset and clock control) +- STM32L4x5 GPIOs (General-purpose I/Os) Missing devices """"""""""""""" @@ -25,7 +26,6 @@ Missing devices The B-L475E-IOT01A does *not* support the following devices: - Serial ports (UART) -- General-purpose I/Os (GPIO) - Analog to Digital Converter (ADC) - SPI controller - Timer controller (TIMER) diff --git a/include/hw/gpio/stm32l4x5_gpio.h b/include/hw/gpio/stm32l4x5_gpio.h new file mode 100644 index 00000000000..0d361f34105 --- /dev/null +++ b/include/hw/gpio/stm32l4x5_gpio.h @@ -0,0 +1,70 @@ +/* + * STM32L4x5 GPIO (General Purpose Input/Ouput) + * + * Copyright (c) 2024 Arnaud Minier + * Copyright (c) 2024 Inès Varhol + * + * SPDX-License-Identifier: GPL-2.0-or-later + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +/* + * The reference used is the STMicroElectronics RM0351 Reference manual + * for STM32L4x5 and STM32L4x6 advanced Arm ® -based 32-bit MCUs. + * https://www.st.com/en/microcontrollers-microprocessors/stm32l4x5/documentation.html + */ + +#ifndef HW_STM32L4X5_GPIO_H +#define HW_STM32L4X5_GPIO_H + +#include "hw/sysbus.h" +#include "qom/object.h" + +#define TYPE_STM32L4X5_GPIO "stm32l4x5-gpio" +OBJECT_DECLARE_SIMPLE_TYPE(Stm32l4x5GpioState, STM32L4X5_GPIO) + +#define GPIO_NUM_PINS 16 + +struct Stm32l4x5GpioState { + SysBusDevice parent_obj; + + MemoryRegion mmio; + + /* GPIO registers */ + uint32_t moder; + uint32_t otyper; + uint32_t ospeedr; + uint32_t pupdr; + uint32_t idr; + uint32_t odr; + uint32_t lckr; + uint32_t afrl; + uint32_t afrh; + uint32_t ascr; + + /* GPIO registers reset values */ + uint32_t moder_reset; + uint32_t ospeedr_reset; + uint32_t pupdr_reset; + + /* + * External driving of pins. + * The pins can be set externally through the device + * anonymous input GPIOs lines under certain conditions. + * The pin must not be in push-pull output mode, + * and can't be set high in open-drain mode. + * Pins driven externally and configured to + * output mode will in general be "disconnected" + * (see `get_gpio_pinmask_to_disconnect()`) + */ + uint16_t disconnected_pins; + uint16_t pins_connected_high; + + char *name; + Clock *clk; + qemu_irq pin[GPIO_NUM_PINS]; +}; + +#endif diff --git a/hw/gpio/stm32l4x5_gpio.c b/hw/gpio/stm32l4x5_gpio.c new file mode 100644 index 00000000000..63b8763e9d3 --- /dev/null +++ b/hw/gpio/stm32l4x5_gpio.c @@ -0,0 +1,477 @@ +/* + * STM32L4x5 GPIO (General Purpose Input/Ouput) + * + * Copyright (c) 2024 Arnaud Minier + * Copyright (c) 2024 Inès Varhol + * + * SPDX-License-Identifier: GPL-2.0-or-later + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +/* + * The reference used is the STMicroElectronics RM0351 Reference manual + * for STM32L4x5 and STM32L4x6 advanced Arm ® -based 32-bit MCUs. + * https://www.st.com/en/microcontrollers-microprocessors/stm32l4x5/documentation.html + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "hw/gpio/stm32l4x5_gpio.h" +#include "hw/irq.h" +#include "hw/qdev-clock.h" +#include "hw/qdev-properties.h" +#include "qapi/visitor.h" +#include "qapi/error.h" +#include "migration/vmstate.h" +#include "trace.h" + +#define GPIO_MODER 0x00 +#define GPIO_OTYPER 0x04 +#define GPIO_OSPEEDR 0x08 +#define GPIO_PUPDR 0x0C +#define GPIO_IDR 0x10 +#define GPIO_ODR 0x14 +#define GPIO_BSRR 0x18 +#define GPIO_LCKR 0x1C +#define GPIO_AFRL 0x20 +#define GPIO_AFRH 0x24 +#define GPIO_BRR 0x28 +#define GPIO_ASCR 0x2C + +/* 0b11111111_11111111_00000000_00000000 */ +#define RESERVED_BITS_MASK 0xFFFF0000 + +static void update_gpio_idr(Stm32l4x5GpioState *s); + +static bool is_pull_up(Stm32l4x5GpioState *s, unsigned pin) +{ + return extract32(s->pupdr, 2 * pin, 2) == 1; +} + +static bool is_pull_down(Stm32l4x5GpioState *s, unsigned pin) +{ + return extract32(s->pupdr, 2 * pin, 2) == 2; +} + +static bool is_output(Stm32l4x5GpioState *s, unsigned pin) +{ + return extract32(s->moder, 2 * pin, 2) == 1; +} + +static bool is_open_drain(Stm32l4x5GpioState *s, unsigned pin) +{ + return extract32(s->otyper, pin, 1) == 1; +} + +static bool is_push_pull(Stm32l4x5GpioState *s, unsigned pin) +{ + return extract32(s->otyper, pin, 1) == 0; +} + +static void stm32l4x5_gpio_reset_hold(Object *obj) +{ + Stm32l4x5GpioState *s = STM32L4X5_GPIO(obj); + + s->moder = s->moder_reset; + s->otyper = 0x00000000; + s->ospeedr = s->ospeedr_reset; + s->pupdr = s->pupdr_reset; + s->idr = 0x00000000; + s->odr = 0x00000000; + s->lckr = 0x00000000; + s->afrl = 0x00000000; + s->afrh = 0x00000000; + s->ascr = 0x00000000; + + s->disconnected_pins = 0xFFFF; + s->pins_connected_high = 0x0000; + update_gpio_idr(s); +} + +static void stm32l4x5_gpio_set(void *opaque, int line, int level) +{ + Stm32l4x5GpioState *s = opaque; + /* + * The pin isn't set if line is configured in output mode + * except if level is 0 and the output is open-drain. + * This way there will be no short-circuit prone situations. + */ + if (is_output(s, line) && !(is_open_drain(s, line) && (level == 0))) { + qemu_log_mask(LOG_GUEST_ERROR, "Line %d can't be driven externally\n", + line); + return; + } + + s->disconnected_pins &= ~(1 << line); + if (level) { + s->pins_connected_high |= (1 << line); + } else { + s->pins_connected_high &= ~(1 << line); + } + trace_stm32l4x5_gpio_pins(s->name, s->disconnected_pins, + s->pins_connected_high); + update_gpio_idr(s); +} + + +static void update_gpio_idr(Stm32l4x5GpioState *s) +{ + uint32_t new_idr_mask = 0; + uint32_t new_idr = s->odr; + uint32_t old_idr = s->idr; + int new_pin_state, old_pin_state; + + for (int i = 0; i < GPIO_NUM_PINS; i++) { + if (is_output(s, i)) { + if (is_push_pull(s, i)) { + new_idr_mask |= (1 << i); + } else if (!(s->odr & (1 << i))) { + /* open-drain ODR 0 */ + new_idr_mask |= (1 << i); + /* open-drain ODR 1 */ + } else if (!(s->disconnected_pins & (1 << i)) && + !(s->pins_connected_high & (1 << i))) { + /* open-drain ODR 1 with pin connected low */ + new_idr_mask |= (1 << i); + new_idr &= ~(1 << i); + /* open-drain ODR 1 with unactive pin */ + } else if (is_pull_up(s, i)) { + new_idr_mask |= (1 << i); + } else if (is_pull_down(s, i)) { + new_idr_mask |= (1 << i); + new_idr &= ~(1 << i); + } + /* + * The only case left is for open-drain ODR 1 + * with unactive pin without pull-up or pull-down : + * the value is floating. + */ + /* input or analog mode with connected pin */ + } else if (!(s->disconnected_pins & (1 << i))) { + if (s->pins_connected_high & (1 << i)) { + /* pin high */ + new_idr_mask |= (1 << i); + new_idr |= (1 << i); + } else { + /* pin low */ + new_idr_mask |= (1 << i); + new_idr &= ~(1 << i); + } + /* input or analog mode with disconnected pin */ + } else { + if (is_pull_up(s, i)) { + /* pull-up */ + new_idr_mask |= (1 << i); + new_idr |= (1 << i); + } else if (is_pull_down(s, i)) { + /* pull-down */ + new_idr_mask |= (1 << i); + new_idr &= ~(1 << i); + } + /* + * The only case left is for a disconnected pin + * without pull-up or pull-down : + * the value is floating. + */ + } + } + + s->idr = (old_idr & ~new_idr_mask) | (new_idr & new_idr_mask); + trace_stm32l4x5_gpio_update_idr(s->name, old_idr, s->idr); + + for (int i = 0; i < GPIO_NUM_PINS; i++) { + if (new_idr_mask & (1 << i)) { + new_pin_state = (new_idr & (1 << i)) > 0; + old_pin_state = (old_idr & (1 << i)) > 0; + if (new_pin_state > old_pin_state) { + qemu_irq_raise(s->pin[i]); + } else if (new_pin_state < old_pin_state) { + qemu_irq_lower(s->pin[i]); + } + } + } +} + +/* + * Return mask of pins that are both configured in output + * mode and externally driven (except pins in open-drain + * mode externally set to 0). + */ +static uint32_t get_gpio_pinmask_to_disconnect(Stm32l4x5GpioState *s) +{ + uint32_t pins_to_disconnect = 0; + for (int i = 0; i < GPIO_NUM_PINS; i++) { + /* for each connected pin in output mode */ + if (!(s->disconnected_pins & (1 << i)) && is_output(s, i)) { + /* if either push-pull or high level */ + if (is_push_pull(s, i) || s->pins_connected_high & (1 << i)) { + pins_to_disconnect |= (1 << i); + qemu_log_mask(LOG_GUEST_ERROR, + "Line %d can't be driven externally\n", + i); + } + } + } + return pins_to_disconnect; +} + +/* + * Set field `disconnected_pins` and call `update_gpio_idr()` + */ +static void disconnect_gpio_pins(Stm32l4x5GpioState *s, uint16_t lines) +{ + s->disconnected_pins |= lines; + trace_stm32l4x5_gpio_pins(s->name, s->disconnected_pins, + s->pins_connected_high); + update_gpio_idr(s); +} + +static void disconnected_pins_set(Object *obj, Visitor *v, + const char *name, void *opaque, Error **errp) +{ + Stm32l4x5GpioState *s = STM32L4X5_GPIO(obj); + uint16_t value; + if (!visit_type_uint16(v, name, &value, errp)) { + return; + } + disconnect_gpio_pins(s, value); +} + +static void disconnected_pins_get(Object *obj, Visitor *v, + const char *name, void *opaque, Error **errp) +{ + visit_type_uint16(v, name, (uint16_t *)opaque, errp); +} + +static void clock_freq_get(Object *obj, Visitor *v, + const char *name, void *opaque, Error **errp) +{ + Stm32l4x5GpioState *s = STM32L4X5_GPIO(obj); + uint32_t clock_freq_hz = clock_get_hz(s->clk); + visit_type_uint32(v, name, &clock_freq_hz, errp); +} + +static void stm32l4x5_gpio_write(void *opaque, hwaddr addr, + uint64_t val64, unsigned int size) +{ + Stm32l4x5GpioState *s = opaque; + + uint32_t value = val64; + trace_stm32l4x5_gpio_write(s->name, addr, val64); + + switch (addr) { + case GPIO_MODER: + s->moder = value; + disconnect_gpio_pins(s, get_gpio_pinmask_to_disconnect(s)); + qemu_log_mask(LOG_UNIMP, + "%s: Analog and AF modes aren't supported\n\ + Analog and AF mode behave like input mode\n", + __func__); + return; + case GPIO_OTYPER: + s->otyper = value & ~RESERVED_BITS_MASK; + disconnect_gpio_pins(s, get_gpio_pinmask_to_disconnect(s)); + return; + case GPIO_OSPEEDR: + qemu_log_mask(LOG_UNIMP, + "%s: Changing I/O output speed isn't supported\n\ + I/O speed is already maximal\n", + __func__); + s->ospeedr = value; + return; + case GPIO_PUPDR: + s->pupdr = value; + update_gpio_idr(s); + return; + case GPIO_IDR: + qemu_log_mask(LOG_UNIMP, + "%s: GPIO->IDR is read-only\n", + __func__); + return; + case GPIO_ODR: + s->odr = value & ~RESERVED_BITS_MASK; + update_gpio_idr(s); + return; + case GPIO_BSRR: { + uint32_t bits_to_reset = (value & RESERVED_BITS_MASK) >> GPIO_NUM_PINS; + uint32_t bits_to_set = value & ~RESERVED_BITS_MASK; + /* If both BSx and BRx are set, BSx has priority.*/ + s->odr &= ~bits_to_reset; + s->odr |= bits_to_set; + update_gpio_idr(s); + return; + } + case GPIO_LCKR: + qemu_log_mask(LOG_UNIMP, + "%s: Locking port bits configuration isn't supported\n", + __func__); + s->lckr = value & ~RESERVED_BITS_MASK; + return; + case GPIO_AFRL: + qemu_log_mask(LOG_UNIMP, + "%s: Alternate functions aren't supported\n", + __func__); + s->afrl = value; + return; + case GPIO_AFRH: + qemu_log_mask(LOG_UNIMP, + "%s: Alternate functions aren't supported\n", + __func__); + s->afrh = value; + return; + case GPIO_BRR: { + uint32_t bits_to_reset = value & ~RESERVED_BITS_MASK; + s->odr &= ~bits_to_reset; + update_gpio_idr(s); + return; + } + case GPIO_ASCR: + qemu_log_mask(LOG_UNIMP, + "%s: ADC function isn't supported\n", + __func__); + s->ascr = value & ~RESERVED_BITS_MASK; + return; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, addr); + } +} + +static uint64_t stm32l4x5_gpio_read(void *opaque, hwaddr addr, + unsigned int size) +{ + Stm32l4x5GpioState *s = opaque; + + trace_stm32l4x5_gpio_read(s->name, addr); + + switch (addr) { + case GPIO_MODER: + return s->moder; + case GPIO_OTYPER: + return s->otyper; + case GPIO_OSPEEDR: + return s->ospeedr; + case GPIO_PUPDR: + return s->pupdr; + case GPIO_IDR: + return s->idr; + case GPIO_ODR: + return s->odr; + case GPIO_BSRR: + return 0; + case GPIO_LCKR: + return s->lckr; + case GPIO_AFRL: + return s->afrl; + case GPIO_AFRH: + return s->afrh; + case GPIO_BRR: + return 0; + case GPIO_ASCR: + return s->ascr; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, addr); + return 0; + } +} + +static const MemoryRegionOps stm32l4x5_gpio_ops = { + .read = stm32l4x5_gpio_read, + .write = stm32l4x5_gpio_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .impl = { + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void stm32l4x5_gpio_init(Object *obj) +{ + Stm32l4x5GpioState *s = STM32L4X5_GPIO(obj); + + memory_region_init_io(&s->mmio, obj, &stm32l4x5_gpio_ops, s, + TYPE_STM32L4X5_GPIO, 0x400); + + sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio); + + qdev_init_gpio_out(DEVICE(obj), s->pin, GPIO_NUM_PINS); + qdev_init_gpio_in(DEVICE(obj), stm32l4x5_gpio_set, GPIO_NUM_PINS); + + s->clk = qdev_init_clock_in(DEVICE(s), "clk", NULL, s, 0); + + object_property_add(obj, "disconnected-pins", "uint16", + disconnected_pins_get, disconnected_pins_set, + NULL, &s->disconnected_pins); + object_property_add(obj, "clock-freq-hz", "uint32", + clock_freq_get, NULL, NULL, NULL); +} + +static void stm32l4x5_gpio_realize(DeviceState *dev, Error **errp) +{ + Stm32l4x5GpioState *s = STM32L4X5_GPIO(dev); + if (!clock_has_source(s->clk)) { + error_setg(errp, "GPIO: clk input must be connected"); + return; + } +} + +static const VMStateDescription vmstate_stm32l4x5_gpio = { + .name = TYPE_STM32L4X5_GPIO, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]){ + VMSTATE_UINT32(moder, Stm32l4x5GpioState), + VMSTATE_UINT32(otyper, Stm32l4x5GpioState), + VMSTATE_UINT32(ospeedr, Stm32l4x5GpioState), + VMSTATE_UINT32(pupdr, Stm32l4x5GpioState), + VMSTATE_UINT32(idr, Stm32l4x5GpioState), + VMSTATE_UINT32(odr, Stm32l4x5GpioState), + VMSTATE_UINT32(lckr, Stm32l4x5GpioState), + VMSTATE_UINT32(afrl, Stm32l4x5GpioState), + VMSTATE_UINT32(afrh, Stm32l4x5GpioState), + VMSTATE_UINT32(ascr, Stm32l4x5GpioState), + VMSTATE_UINT16(disconnected_pins, Stm32l4x5GpioState), + VMSTATE_UINT16(pins_connected_high, Stm32l4x5GpioState), + VMSTATE_END_OF_LIST() + } +}; + +static Property stm32l4x5_gpio_properties[] = { + DEFINE_PROP_STRING("name", Stm32l4x5GpioState, name), + DEFINE_PROP_UINT32("mode-reset", Stm32l4x5GpioState, moder_reset, 0), + DEFINE_PROP_UINT32("ospeed-reset", Stm32l4x5GpioState, ospeedr_reset, 0), + DEFINE_PROP_UINT32("pupd-reset", Stm32l4x5GpioState, pupdr_reset, 0), + DEFINE_PROP_END_OF_LIST(), +}; + +static void stm32l4x5_gpio_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + device_class_set_props(dc, stm32l4x5_gpio_properties); + dc->vmsd = &vmstate_stm32l4x5_gpio; + dc->realize = stm32l4x5_gpio_realize; + rc->phases.hold = stm32l4x5_gpio_reset_hold; +} + +static const TypeInfo stm32l4x5_gpio_types[] = { + { + .name = TYPE_STM32L4X5_GPIO, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(Stm32l4x5GpioState), + .instance_init = stm32l4x5_gpio_init, + .class_init = stm32l4x5_gpio_class_init, + }, +}; + +DEFINE_TYPES(stm32l4x5_gpio_types) diff --git a/hw/gpio/Kconfig b/hw/gpio/Kconfig index d2cf3accc88..712940b8e0b 100644 --- a/hw/gpio/Kconfig +++ b/hw/gpio/Kconfig @@ -16,3 +16,6 @@ config GPIO_PWR config SIFIVE_GPIO bool + +config STM32L4X5_GPIO + bool diff --git a/hw/gpio/meson.build b/hw/gpio/meson.build index 8a8d03d885b..3454b503aeb 100644 --- a/hw/gpio/meson.build +++ b/hw/gpio/meson.build @@ -13,5 +13,6 @@ system_ss.add(when: 'CONFIG_RASPI', if_true: files( 'bcm2835_gpio.c', 'bcm2838_gpio.c' )) +system_ss.add(when: 'CONFIG_STM32L4X5_SOC', if_true: files('stm32l4x5_gpio.c')) system_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_gpio.c')) system_ss.add(when: 'CONFIG_SIFIVE_GPIO', if_true: files('sifive_gpio.c')) diff --git a/hw/gpio/trace-events b/hw/gpio/trace-events index 9736b362ac1..9331f4289d5 100644 --- a/hw/gpio/trace-events +++ b/hw/gpio/trace-events @@ -31,3 +31,9 @@ sifive_gpio_update_output_irq(int64_t line, int64_t value) "line %" PRIi64 " val # aspeed_gpio.c aspeed_gpio_read(uint64_t offset, uint64_t value) "offset: 0x%" PRIx64 " value 0x%" PRIx64 aspeed_gpio_write(uint64_t offset, uint64_t value) "offset: 0x%" PRIx64 " value 0x%" PRIx64 + +# stm32l4x5_gpio.c +stm32l4x5_gpio_read(char *gpio, uint64_t addr) "GPIO%s addr: 0x%" PRIx64 " " +stm32l4x5_gpio_write(char *gpio, uint64_t addr, uint64_t data) "GPIO%s addr: 0x%" PRIx64 " val: 0x%" PRIx64 "" +stm32l4x5_gpio_update_idr(char *gpio, uint32_t old_idr, uint32_t new_idr) "GPIO%s from: 0x%x to: 0x%x" +stm32l4x5_gpio_pins(char *gpio, uint16_t disconnected, uint16_t high) "GPIO%s disconnected pins: 0x%x levels: 0x%x"