Message ID | 20231018141151.87466-6-philmd@linaro.org |
---|---|
State | New |
Headers | show |
Series | hw: Strengthen SysBus & QBus API | expand |
On 18/10/2023 16.11, Philippe Mathieu-Daudé wrote: > There is no point in exposing an internal MMIO region via > SysBus and directly mapping it in the very same device. > > Just map it without using the SysBus API. > > Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> > --- > hw/pci-host/bonito.c | 29 ++++++++++++++--------------- > 1 file changed, 14 insertions(+), 15 deletions(-) > > diff --git a/hw/pci-host/bonito.c b/hw/pci-host/bonito.c > index ee6cb85e97..3b803bcad3 100644 > --- a/hw/pci-host/bonito.c > +++ b/hw/pci-host/bonito.c > @@ -654,7 +654,6 @@ static void bonito_host_realize(DeviceState *dev, Error **errp) > static void bonito_pci_realize(PCIDevice *dev, Error **errp) > { > PCIBonitoState *s = PCI_BONITO(dev); > - SysBusDevice *sysbus = SYS_BUS_DEVICE(s->pcihost); > PCIHostState *phb = PCI_HOST_BRIDGE(s->pcihost); > BonitoState *bs = s->pcihost; > MemoryRegion *pcimem_alias = g_new(MemoryRegion, 1); > @@ -668,48 +667,48 @@ static void bonito_pci_realize(PCIDevice *dev, Error **errp) > /* set the north bridge register mapping */ > memory_region_init_io(&s->iomem, OBJECT(s), &bonito_ops, s, > "north-bridge-register", BONITO_INTERNAL_REG_SIZE); > - sysbus_init_mmio(sysbus, &s->iomem); > - sysbus_mmio_map(sysbus, 0, BONITO_INTERNAL_REG_BASE); > + memory_region_add_subregion(get_system_memory(), BONITO_INTERNAL_REG_BASE, > + &s->iomem); > > /* set the north bridge pci configure mapping */ > memory_region_init_io(&phb->conf_mem, OBJECT(s), &bonito_pciconf_ops, s, > "north-bridge-pci-config", BONITO_PCICONFIG_SIZE); > - sysbus_init_mmio(sysbus, &phb->conf_mem); > - sysbus_mmio_map(sysbus, 1, BONITO_PCICONFIG_BASE); > + memory_region_add_subregion(get_system_memory(), BONITO_PCICONFIG_BASE, > + &phb->conf_mem); > > /* set the south bridge pci configure mapping */ > memory_region_init_io(&phb->data_mem, OBJECT(s), &bonito_spciconf_ops, s, > "south-bridge-pci-config", BONITO_SPCICONFIG_SIZE); > - sysbus_init_mmio(sysbus, &phb->data_mem); > - sysbus_mmio_map(sysbus, 2, BONITO_SPCICONFIG_BASE); > + memory_region_add_subregion(get_system_memory(), BONITO_SPCICONFIG_BASE, > + &phb->data_mem); > > create_unimplemented_device("bonito", BONITO_REG_BASE, BONITO_REG_SIZE); > > memory_region_init_io(&s->iomem_ldma, OBJECT(s), &bonito_ldma_ops, s, > "ldma", 0x100); > - sysbus_init_mmio(sysbus, &s->iomem_ldma); > - sysbus_mmio_map(sysbus, 3, 0x1fe00200); > + memory_region_add_subregion(get_system_memory(), 0x1fe00200, > + &s->iomem_ldma); > > /* PCI copier */ > memory_region_init_io(&s->iomem_cop, OBJECT(s), &bonito_cop_ops, s, > "cop", 0x100); > - sysbus_init_mmio(sysbus, &s->iomem_cop); > - sysbus_mmio_map(sysbus, 4, 0x1fe00300); > + memory_region_add_subregion(get_system_memory(), 0x1fe00300, > + &s->iomem_cop); > > create_unimplemented_device("ROMCS", BONITO_FLASH_BASE, 60 * MiB); > > /* Map PCI IO Space 0x1fd0 0000 - 0x1fd1 0000 */ > memory_region_init_alias(&s->bonito_pciio, OBJECT(s), "isa_mmio", > get_system_io(), 0, BONITO_PCIIO_SIZE); > - sysbus_init_mmio(sysbus, &s->bonito_pciio); > - sysbus_mmio_map(sysbus, 5, BONITO_PCIIO_BASE); > + memory_region_add_subregion(get_system_memory(), BONITO_PCIIO_BASE, > + &s->bonito_pciio); > > /* add pci local io mapping */ > > memory_region_init_alias(&s->bonito_localio, OBJECT(s), "IOCS[0]", > get_system_io(), 0, 256 * KiB); > - sysbus_init_mmio(sysbus, &s->bonito_localio); > - sysbus_mmio_map(sysbus, 6, BONITO_DEV_BASE); > + memory_region_add_subregion(get_system_memory(), BONITO_DEV_BASE, > + &s->bonito_localio); > create_unimplemented_device("IOCS[1]", BONITO_DEV_BASE + 1 * 256 * KiB, > 256 * KiB); > create_unimplemented_device("IOCS[2]", BONITO_DEV_BASE + 2 * 256 * KiB, Would it make sense to cache the return value of get_system_memory() in a local variable instead of calling it again and again ...? Thomas
On 18/10/23 18:05, Thomas Huth wrote: > On 18/10/2023 16.11, Philippe Mathieu-Daudé wrote: >> There is no point in exposing an internal MMIO region via >> SysBus and directly mapping it in the very same device. >> >> Just map it without using the SysBus API. >> >> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> >> --- >> hw/pci-host/bonito.c | 29 ++++++++++++++--------------- >> 1 file changed, 14 insertions(+), 15 deletions(-) >> >> diff --git a/hw/pci-host/bonito.c b/hw/pci-host/bonito.c >> index ee6cb85e97..3b803bcad3 100644 >> --- a/hw/pci-host/bonito.c >> +++ b/hw/pci-host/bonito.c >> @@ -654,7 +654,6 @@ static void bonito_host_realize(DeviceState *dev, >> Error **errp) >> static void bonito_pci_realize(PCIDevice *dev, Error **errp) >> { >> PCIBonitoState *s = PCI_BONITO(dev); >> - SysBusDevice *sysbus = SYS_BUS_DEVICE(s->pcihost); >> PCIHostState *phb = PCI_HOST_BRIDGE(s->pcihost); >> BonitoState *bs = s->pcihost; >> MemoryRegion *pcimem_alias = g_new(MemoryRegion, 1); >> @@ -668,48 +667,48 @@ static void bonito_pci_realize(PCIDevice *dev, >> Error **errp) >> /* set the north bridge register mapping */ >> memory_region_init_io(&s->iomem, OBJECT(s), &bonito_ops, s, >> "north-bridge-register", >> BONITO_INTERNAL_REG_SIZE); >> - sysbus_init_mmio(sysbus, &s->iomem); >> - sysbus_mmio_map(sysbus, 0, BONITO_INTERNAL_REG_BASE); >> + memory_region_add_subregion(get_system_memory(), >> BONITO_INTERNAL_REG_BASE, >> + &s->iomem); >> /* set the north bridge pci configure mapping */ >> memory_region_init_io(&phb->conf_mem, OBJECT(s), >> &bonito_pciconf_ops, s, >> "north-bridge-pci-config", >> BONITO_PCICONFIG_SIZE); >> - sysbus_init_mmio(sysbus, &phb->conf_mem); >> - sysbus_mmio_map(sysbus, 1, BONITO_PCICONFIG_BASE); >> + memory_region_add_subregion(get_system_memory(), >> BONITO_PCICONFIG_BASE, >> + &phb->conf_mem); >> /* set the south bridge pci configure mapping */ >> memory_region_init_io(&phb->data_mem, OBJECT(s), >> &bonito_spciconf_ops, s, >> "south-bridge-pci-config", >> BONITO_SPCICONFIG_SIZE); >> - sysbus_init_mmio(sysbus, &phb->data_mem); >> - sysbus_mmio_map(sysbus, 2, BONITO_SPCICONFIG_BASE); >> + memory_region_add_subregion(get_system_memory(), >> BONITO_SPCICONFIG_BASE, >> + &phb->data_mem); >> create_unimplemented_device("bonito", BONITO_REG_BASE, >> BONITO_REG_SIZE); >> memory_region_init_io(&s->iomem_ldma, OBJECT(s), >> &bonito_ldma_ops, s, >> "ldma", 0x100); >> - sysbus_init_mmio(sysbus, &s->iomem_ldma); >> - sysbus_mmio_map(sysbus, 3, 0x1fe00200); >> + memory_region_add_subregion(get_system_memory(), 0x1fe00200, >> + &s->iomem_ldma); >> /* PCI copier */ >> memory_region_init_io(&s->iomem_cop, OBJECT(s), &bonito_cop_ops, s, >> "cop", 0x100); >> - sysbus_init_mmio(sysbus, &s->iomem_cop); >> - sysbus_mmio_map(sysbus, 4, 0x1fe00300); >> + memory_region_add_subregion(get_system_memory(), 0x1fe00300, >> + &s->iomem_cop); >> create_unimplemented_device("ROMCS", BONITO_FLASH_BASE, 60 * MiB); >> /* Map PCI IO Space 0x1fd0 0000 - 0x1fd1 0000 */ >> memory_region_init_alias(&s->bonito_pciio, OBJECT(s), "isa_mmio", >> get_system_io(), 0, BONITO_PCIIO_SIZE); >> - sysbus_init_mmio(sysbus, &s->bonito_pciio); >> - sysbus_mmio_map(sysbus, 5, BONITO_PCIIO_BASE); >> + memory_region_add_subregion(get_system_memory(), BONITO_PCIIO_BASE, >> + &s->bonito_pciio); >> /* add pci local io mapping */ >> memory_region_init_alias(&s->bonito_localio, OBJECT(s), "IOCS[0]", >> get_system_io(), 0, 256 * KiB); >> - sysbus_init_mmio(sysbus, &s->bonito_localio); >> - sysbus_mmio_map(sysbus, 6, BONITO_DEV_BASE); >> + memory_region_add_subregion(get_system_memory(), BONITO_DEV_BASE, >> + &s->bonito_localio); >> create_unimplemented_device("IOCS[1]", BONITO_DEV_BASE + 1 * 256 >> * KiB, >> 256 * KiB); >> create_unimplemented_device("IOCS[2]", BONITO_DEV_BASE + 2 * 256 >> * KiB, > > Would it make sense to cache the return value of get_system_memory() in > a local variable instead of calling it again and again ...? This is done later, at this point I'm just doing mechanical transformation with: @@ expression sbdev; expression index; expression addr; expression subregion; @@ - sysbus_init_mmio(sbdev, subregion); ... when != sbdev - sysbus_mmio_map(sbdev, index, addr); + memory_region_add_subregion(get_system_memory(), addr, subregion); @@ expression sbdev; expression index; expression addr; expression subregion; expression priority; @@ - sysbus_init_mmio(sbdev, subregion); ... when != sbdev - sysbus_mmio_map_overlap(sbdev, index, addr, priority); + memory_region_add_subregion_overlap(get_system_memory(), addr, + subregion, priority);
diff --git a/hw/pci-host/bonito.c b/hw/pci-host/bonito.c index ee6cb85e97..3b803bcad3 100644 --- a/hw/pci-host/bonito.c +++ b/hw/pci-host/bonito.c @@ -654,7 +654,6 @@ static void bonito_host_realize(DeviceState *dev, Error **errp) static void bonito_pci_realize(PCIDevice *dev, Error **errp) { PCIBonitoState *s = PCI_BONITO(dev); - SysBusDevice *sysbus = SYS_BUS_DEVICE(s->pcihost); PCIHostState *phb = PCI_HOST_BRIDGE(s->pcihost); BonitoState *bs = s->pcihost; MemoryRegion *pcimem_alias = g_new(MemoryRegion, 1); @@ -668,48 +667,48 @@ static void bonito_pci_realize(PCIDevice *dev, Error **errp) /* set the north bridge register mapping */ memory_region_init_io(&s->iomem, OBJECT(s), &bonito_ops, s, "north-bridge-register", BONITO_INTERNAL_REG_SIZE); - sysbus_init_mmio(sysbus, &s->iomem); - sysbus_mmio_map(sysbus, 0, BONITO_INTERNAL_REG_BASE); + memory_region_add_subregion(get_system_memory(), BONITO_INTERNAL_REG_BASE, + &s->iomem); /* set the north bridge pci configure mapping */ memory_region_init_io(&phb->conf_mem, OBJECT(s), &bonito_pciconf_ops, s, "north-bridge-pci-config", BONITO_PCICONFIG_SIZE); - sysbus_init_mmio(sysbus, &phb->conf_mem); - sysbus_mmio_map(sysbus, 1, BONITO_PCICONFIG_BASE); + memory_region_add_subregion(get_system_memory(), BONITO_PCICONFIG_BASE, + &phb->conf_mem); /* set the south bridge pci configure mapping */ memory_region_init_io(&phb->data_mem, OBJECT(s), &bonito_spciconf_ops, s, "south-bridge-pci-config", BONITO_SPCICONFIG_SIZE); - sysbus_init_mmio(sysbus, &phb->data_mem); - sysbus_mmio_map(sysbus, 2, BONITO_SPCICONFIG_BASE); + memory_region_add_subregion(get_system_memory(), BONITO_SPCICONFIG_BASE, + &phb->data_mem); create_unimplemented_device("bonito", BONITO_REG_BASE, BONITO_REG_SIZE); memory_region_init_io(&s->iomem_ldma, OBJECT(s), &bonito_ldma_ops, s, "ldma", 0x100); - sysbus_init_mmio(sysbus, &s->iomem_ldma); - sysbus_mmio_map(sysbus, 3, 0x1fe00200); + memory_region_add_subregion(get_system_memory(), 0x1fe00200, + &s->iomem_ldma); /* PCI copier */ memory_region_init_io(&s->iomem_cop, OBJECT(s), &bonito_cop_ops, s, "cop", 0x100); - sysbus_init_mmio(sysbus, &s->iomem_cop); - sysbus_mmio_map(sysbus, 4, 0x1fe00300); + memory_region_add_subregion(get_system_memory(), 0x1fe00300, + &s->iomem_cop); create_unimplemented_device("ROMCS", BONITO_FLASH_BASE, 60 * MiB); /* Map PCI IO Space 0x1fd0 0000 - 0x1fd1 0000 */ memory_region_init_alias(&s->bonito_pciio, OBJECT(s), "isa_mmio", get_system_io(), 0, BONITO_PCIIO_SIZE); - sysbus_init_mmio(sysbus, &s->bonito_pciio); - sysbus_mmio_map(sysbus, 5, BONITO_PCIIO_BASE); + memory_region_add_subregion(get_system_memory(), BONITO_PCIIO_BASE, + &s->bonito_pciio); /* add pci local io mapping */ memory_region_init_alias(&s->bonito_localio, OBJECT(s), "IOCS[0]", get_system_io(), 0, 256 * KiB); - sysbus_init_mmio(sysbus, &s->bonito_localio); - sysbus_mmio_map(sysbus, 6, BONITO_DEV_BASE); + memory_region_add_subregion(get_system_memory(), BONITO_DEV_BASE, + &s->bonito_localio); create_unimplemented_device("IOCS[1]", BONITO_DEV_BASE + 1 * 256 * KiB, 256 * KiB); create_unimplemented_device("IOCS[2]", BONITO_DEV_BASE + 2 * 256 * KiB,
There is no point in exposing an internal MMIO region via SysBus and directly mapping it in the very same device. Just map it without using the SysBus API. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- hw/pci-host/bonito.c | 29 ++++++++++++++--------------- 1 file changed, 14 insertions(+), 15 deletions(-)