@@ -227,17 +227,6 @@ struct CPUWatchpoint {
QTAILQ_ENTRY(CPUWatchpoint) entry;
};
-#ifdef CONFIG_PLUGIN
-/*
- * For plugins we sometime need to save the resolved iotlb data before
- * the memory regions get moved around by io_writex.
- */
-typedef struct SavedIOTLB {
- MemoryRegionSection *section;
- hwaddr mr_offset;
-} SavedIOTLB;
-#endif
-
struct KVMState;
struct kvm_run;
@@ -409,8 +398,6 @@ struct CPUState {
#ifdef CONFIG_PLUGIN
GArray *plugin_mem_cbs;
- /* saved iotlb data from io_writex */
- SavedIOTLB saved_iotlb;
#endif
/* TODO Move common fields from CPUArchState here. */
@@ -129,7 +129,6 @@ typedef struct QString QString;
typedef struct RAMBlock RAMBlock;
typedef struct Range Range;
typedef struct ReservedRegion ReservedRegion;
-typedef struct SavedIOTLB SavedIOTLB;
typedef struct SHPCDevice SHPCDevice;
typedef struct SSIBus SSIBus;
typedef struct TCGHelperInfo TCGHelperInfo;
@@ -1367,21 +1367,6 @@ static inline void cpu_transaction_failed(CPUState *cpu, hwaddr physaddr,
}
}
-/*
- * Save a potentially trashed CPUTLBEntryFull for later lookup by plugin.
- * This is read by tlb_plugin_lookup if the fulltlb entry doesn't match
- * because of the side effect of io_writex changing memory layout.
- */
-static void save_iotlb_data(CPUState *cs, MemoryRegionSection *section,
- hwaddr mr_offset)
-{
-#ifdef CONFIG_PLUGIN
- SavedIOTLB *saved = &cs->saved_iotlb;
- saved->section = section;
- saved->mr_offset = mr_offset;
-#endif
-}
-
static uint64_t io_readx(CPUArchState *env, CPUTLBEntryFull *full,
int mmu_idx, vaddr addr, uintptr_t retaddr,
MMUAccessType access_type, MemOp op)
@@ -1401,12 +1386,6 @@ static uint64_t io_readx(CPUArchState *env, CPUTLBEntryFull *full,
cpu_io_recompile(cpu, retaddr);
}
- /*
- * The memory_region_dispatch may trigger a flush/resize
- * so for plugins we save the iotlb_data just in case.
- */
- save_iotlb_data(cpu, section, mr_offset);
-
{
QEMU_IOTHREAD_LOCK_GUARD();
r = memory_region_dispatch_read(mr, mr_offset, &val, op, full->attrs);
@@ -1441,12 +1420,6 @@ static void io_writex(CPUArchState *env, CPUTLBEntryFull *full,
}
cpu->mem_io_pc = retaddr;
- /*
- * The memory_region_dispatch may trigger a flush/resize
- * so for plugins we save the iotlb_data just in case.
- */
- save_iotlb_data(cpu, section, mr_offset);
-
{
QEMU_IOTHREAD_LOCK_GUARD();
r = memory_region_dispatch_write(mr, mr_offset, val, op, full->attrs);
@@ -1729,45 +1702,39 @@ tb_page_addr_t get_page_addr_code_hostp(CPUArchState *env, vaddr addr,
* in the softmmu lookup code (or helper). We don't handle re-fills or
* checking the victim table. This is purely informational.
*
- * This almost never fails as the memory access being instrumented
- * should have just filled the TLB. The one corner case is io_writex
- * which can cause TLB flushes and potential resizing of the TLBs
- * losing the information we need. In those cases we need to recover
- * data from a copy of the CPUTLBEntryFull. As long as this always occurs
- * from the same thread (which a mem callback will be) this is safe.
+ * The one corner case is i/o write, which can cause changes to the
+ * address space. Those changes, and the corresponding tlb flush,
+ * should be delayed until the next TB, so even then this ought not fail.
+ * But check, Just in Case.
*/
-
bool tlb_plugin_lookup(CPUState *cpu, vaddr addr, int mmu_idx,
bool is_store, struct qemu_plugin_hwaddr *data)
{
CPUArchState *env = cpu->env_ptr;
CPUTLBEntry *tlbe = tlb_entry(env, mmu_idx, addr);
uintptr_t index = tlb_index(env, mmu_idx, addr);
- uint64_t tlb_addr = is_store ? tlb_addr_write(tlbe) : tlbe->addr_read;
+ MMUAccessType access_type = is_store ? MMU_DATA_STORE : MMU_DATA_LOAD;
+ uint64_t tlb_addr = tlb_read_idx(tlbe, access_type);
- if (likely(tlb_hit(tlb_addr, addr))) {
- /* We must have an iotlb entry for MMIO */
- if (tlb_addr & TLB_MMIO) {
- CPUTLBEntryFull *full;
- full = &env_tlb(env)->d[mmu_idx].fulltlb[index];
- data->is_io = true;
- data->v.io.section =
- iotlb_to_section(cpu, full->xlat_section, full->attrs);
- data->v.io.offset = (full->xlat_section & TARGET_PAGE_MASK) + addr;
- } else {
- data->is_io = false;
- data->v.ram.hostaddr = (void *)((uintptr_t)addr + tlbe->addend);
- }
- return true;
- } else {
- SavedIOTLB *saved = &cpu->saved_iotlb;
- data->is_io = true;
- data->v.io.section = saved->section;
- data->v.io.offset = saved->mr_offset;
- return true;
+ if (unlikely(!tlb_hit(tlb_addr, addr))) {
+ return false;
}
-}
+ /* We must have an iotlb entry for MMIO */
+ if (tlb_addr & TLB_MMIO) {
+ CPUTLBEntryFull *full = &env_tlb(env)->d[mmu_idx].fulltlb[index];
+ hwaddr xlat = full->xlat_section;
+
+ data->is_io = true;
+ data->v.io.offset = (xlat & TARGET_PAGE_MASK) + addr;
+ data->v.io.section =
+ iotlb_to_section(cpu, xlat & ~TARGET_PAGE_MASK, full->attrs);
+ } else {
+ data->is_io = false;
+ data->v.ram.hostaddr = (void *)((uintptr_t)addr + tlbe->addend);
+ }
+ return true;
+}
#endif
/*
Now that we defer address space update and tlb_flush until the next async_run_on_cpu, the plugin run at the end of the instruction no longer has to contend with a flushed tlb. Therefore, delete SavedIOTLB entirely. Properly return false from tlb_plugin_lookup when we do not have a tlb match. Fixes a bug in which SavedIOTLB had stale data, because there were multiple i/o accesses within a single insn. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> --- include/hw/core/cpu.h | 13 ------- include/qemu/typedefs.h | 1 - accel/tcg/cputlb.c | 79 ++++++++++++----------------------------- 3 files changed, 23 insertions(+), 70 deletions(-)