[v2,11/11] target/arm: Declare CPU <-> NVIC helpers in 'hw/intc/armv7m_nvic.h'

diff --git a/include/hw/intc/armv7m_nvic.h b/include/hw/intc/armv7m_nvic.h
index 07f9c21a5f..1ca262fbf8 100644
--- a/include/hw/intc/armv7m_nvic.h
+++ b/include/hw/intc/armv7m_nvic.h
@@ -83,4 +83,127 @@  struct NVICState {
     qemu_irq sysresetreq;
 };
 
+/* Interface between CPU and Interrupt controller.  */
+/**
+ * armv7m_nvic_set_pending: mark the specified exception as pending
+ * @s: the NVIC
+ * @irq: the exception number to mark pending
+ * @secure: false for non-banked exceptions or for the nonsecure
+ * version of a banked exception, true for the secure version of a banked
+ * exception.
+ *
+ * Marks the specified exception as pending. Note that we will assert()
+ * if @secure is true and @irq does not specify one of the fixed set
+ * of architecturally banked exceptions.
+ */
+void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure);
+/**
+ * armv7m_nvic_set_pending_derived: mark this derived exception as pending
+ * @s: the NVIC
+ * @irq: the exception number to mark pending
+ * @secure: false for non-banked exceptions or for the nonsecure
+ * version of a banked exception, true for the secure version of a banked
+ * exception.
+ *
+ * Similar to armv7m_nvic_set_pending(), but specifically for derived
+ * exceptions (exceptions generated in the course of trying to take
+ * a different exception).
+ */
+void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure);
+/**
+ * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending
+ * @s: the NVIC
+ * @irq: the exception number to mark pending
+ * @secure: false for non-banked exceptions or for the nonsecure
+ * version of a banked exception, true for the secure version of a banked
+ * exception.
+ *
+ * Similar to armv7m_nvic_set_pending(), but specifically for exceptions
+ * generated in the course of lazy stacking of FP registers.
+ */
+void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure);
+/**
+ * armv7m_nvic_get_pending_irq_info: return highest priority pending
+ *    exception, and whether it targets Secure state
+ * @s: the NVIC
+ * @pirq: set to pending exception number
+ * @ptargets_secure: set to whether pending exception targets Secure
+ *
+ * This function writes the number of the highest priority pending
+ * exception (the one which would be made active by
+ * armv7m_nvic_acknowledge_irq()) to @pirq, and sets @ptargets_secure
+ * to true if the current highest priority pending exception should
+ * be taken to Secure state, false for NS.
+ */
+void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq,
+                                      bool *ptargets_secure);
+/**
+ * armv7m_nvic_acknowledge_irq: make highest priority pending exception active
+ * @s: the NVIC
+ *
+ * Move the current highest priority pending exception from the pending
+ * state to the active state, and update v7m.exception to indicate that
+ * it is the exception currently being handled.
+ */
+void armv7m_nvic_acknowledge_irq(NVICState *s);
+/**
+ * armv7m_nvic_complete_irq: complete specified interrupt or exception
+ * @s: the NVIC
+ * @irq: the exception number to complete
+ * @secure: true if this exception was secure
+ *
+ * Returns: -1 if the irq was not active
+ *           1 if completing this irq brought us back to base (no active irqs)
+ *           0 if there is still an irq active after this one was completed
+ * (Ignoring -1, this is the same as the RETTOBASE value before completion.)
+ */
+int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure);
+/**
+ * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure)
+ * @s: the NVIC
+ * @irq: the exception number to mark pending
+ * @secure: false for non-banked exceptions or for the nonsecure
+ * version of a banked exception, true for the secure version of a banked
+ * exception.
+ *
+ * Return whether an exception is "ready", i.e. whether the exception is
+ * enabled and is configured at a priority which would allow it to
+ * interrupt the current execution priority. This controls whether the
+ * RDY bit for it in the FPCCR is set.
+ */
+bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure);
+/**
+ * armv7m_nvic_raw_execution_priority: return the raw execution priority
+ * @s: the NVIC
+ *
+ * Returns: the raw execution priority as defined by the v8M architecture.
+ * This is the execution priority minus the effects of AIRCR.PRIS,
+ * and minus any PRIMASK/FAULTMASK/BASEPRI priority boosting.
+ * (v8M ARM ARM I_PKLD.)
+ */
+int armv7m_nvic_raw_execution_priority(NVICState *s);
+/**
+ * armv7m_nvic_neg_prio_requested: return true if the requested execution
+ * priority is negative for the specified security state.
+ * @s: the NVIC
+ * @secure: the security state to test
+ * This corresponds to the pseudocode IsReqExecPriNeg().
+ */
+#ifndef CONFIG_USER_ONLY
+bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure);
+#else
+static inline bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure)
+{
+    return false;
+}
+#endif
+#ifndef CONFIG_USER_ONLY
+bool armv7m_nvic_can_take_pending_exception(NVICState *s);
+#else
+static inline bool armv7m_nvic_can_take_pending_exception(NVICState *s)
+{
+    return true;
+}
+#endif
+
 #endif
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index b3a2275b08..876ab8f3bf 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -36,8 +36,10 @@ 
 #if !defined(CONFIG_USER_ONLY)
 #include "hw/loader.h"
 #include "hw/boards.h"
+#ifdef CONFIG_TCG
 #include "hw/intc/armv7m_nvic.h"
-#endif
+#endif /* CONFIG_TCG */
+#endif /* !CONFIG_USER_ONLY */
 #include "sysemu/tcg.h"
 #include "sysemu/qtest.h"
 #include "sysemu/hw_accel.h"
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index 9a80819d8d..d623afe84a 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -2559,129 +2559,6 @@  void arm_cpu_list(void);
 uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx,
                                  uint32_t cur_el, bool secure);
 
-/* Interface between CPU and Interrupt controller.  */
-#ifndef CONFIG_USER_ONLY
-bool armv7m_nvic_can_take_pending_exception(NVICState *s);
-#else
-static inline bool armv7m_nvic_can_take_pending_exception(NVICState *s)
-{
-    return true;
-}
-#endif
-/**
- * armv7m_nvic_set_pending: mark the specified exception as pending
- * @s: the NVIC
- * @irq: the exception number to mark pending
- * @secure: false for non-banked exceptions or for the nonsecure
- * version of a banked exception, true for the secure version of a banked
- * exception.
- *
- * Marks the specified exception as pending. Note that we will assert()
- * if @secure is true and @irq does not specify one of the fixed set
- * of architecturally banked exceptions.
- */
-void armv7m_nvic_set_pending(NVICState *s, int irq, bool secure);
-/**
- * armv7m_nvic_set_pending_derived: mark this derived exception as pending
- * @s: the NVIC
- * @irq: the exception number to mark pending
- * @secure: false for non-banked exceptions or for the nonsecure
- * version of a banked exception, true for the secure version of a banked
- * exception.
- *
- * Similar to armv7m_nvic_set_pending(), but specifically for derived
- * exceptions (exceptions generated in the course of trying to take
- * a different exception).
- */
-void armv7m_nvic_set_pending_derived(NVICState *s, int irq, bool secure);
-/**
- * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending
- * @s: the NVIC
- * @irq: the exception number to mark pending
- * @secure: false for non-banked exceptions or for the nonsecure
- * version of a banked exception, true for the secure version of a banked
- * exception.
- *
- * Similar to armv7m_nvic_set_pending(), but specifically for exceptions
- * generated in the course of lazy stacking of FP registers.
- */
-void armv7m_nvic_set_pending_lazyfp(NVICState *s, int irq, bool secure);
-/**
- * armv7m_nvic_get_pending_irq_info: return highest priority pending
- *    exception, and whether it targets Secure state
- * @s: the NVIC
- * @pirq: set to pending exception number
- * @ptargets_secure: set to whether pending exception targets Secure
- *
- * This function writes the number of the highest priority pending
- * exception (the one which would be made active by
- * armv7m_nvic_acknowledge_irq()) to @pirq, and sets @ptargets_secure
- * to true if the current highest priority pending exception should
- * be taken to Secure state, false for NS.
- */
-void armv7m_nvic_get_pending_irq_info(NVICState *s, int *pirq,
-                                      bool *ptargets_secure);
-/**
- * armv7m_nvic_acknowledge_irq: make highest priority pending exception active
- * @s: the NVIC
- *
- * Move the current highest priority pending exception from the pending
- * state to the active state, and update v7m.exception to indicate that
- * it is the exception currently being handled.
- */
-void armv7m_nvic_acknowledge_irq(NVICState *s);
-/**
- * armv7m_nvic_complete_irq: complete specified interrupt or exception
- * @s: the NVIC
- * @irq: the exception number to complete
- * @secure: true if this exception was secure
- *
- * Returns: -1 if the irq was not active
- *           1 if completing this irq brought us back to base (no active irqs)
- *           0 if there is still an irq active after this one was completed
- * (Ignoring -1, this is the same as the RETTOBASE value before completion.)
- */
-int armv7m_nvic_complete_irq(NVICState *s, int irq, bool secure);
-/**
- * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure)
- * @s: the NVIC
- * @irq: the exception number to mark pending
- * @secure: false for non-banked exceptions or for the nonsecure
- * version of a banked exception, true for the secure version of a banked
- * exception.
- *
- * Return whether an exception is "ready", i.e. whether the exception is
- * enabled and is configured at a priority which would allow it to
- * interrupt the current execution priority. This controls whether the
- * RDY bit for it in the FPCCR is set.
- */
-bool armv7m_nvic_get_ready_status(NVICState *s, int irq, bool secure);
-/**
- * armv7m_nvic_raw_execution_priority: return the raw execution priority
- * @s: the NVIC
- *
- * Returns: the raw execution priority as defined by the v8M architecture.
- * This is the execution priority minus the effects of AIRCR.PRIS,
- * and minus any PRIMASK/FAULTMASK/BASEPRI priority boosting.
- * (v8M ARM ARM I_PKLD.)
- */
-int armv7m_nvic_raw_execution_priority(NVICState *s);
-/**
- * armv7m_nvic_neg_prio_requested: return true if the requested execution
- * priority is negative for the specified security state.
- * @s: the NVIC
- * @secure: the security state to test
- * This corresponds to the pseudocode IsReqExecPriNeg().
- */
-#ifndef CONFIG_USER_ONLY
-bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure);
-#else
-static inline bool armv7m_nvic_neg_prio_requested(NVICState *s, bool secure)
-{
-    return false;
-}
-#endif
-
 /* Interface for defining coprocessor registers.
  * Registers are defined in tables of arm_cp_reginfo structs
  * which are passed to define_arm_cp_regs().
diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c
index ccde5080eb..df0c45e523 100644
--- a/target/arm/cpu_tcg.c
+++ b/target/arm/cpu_tcg.c
@@ -19,6 +19,9 @@ 
 #include "hw/boards.h"
 #endif
 #include "cpregs.h"
+#if !defined(CONFIG_USER_ONLY) && defined(CONFIG_TCG)
+#include "hw/intc/armv7m_nvic.h"
+#endif
 
 
 /* Share AArch32 -cpu max features with AArch64. */
diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c
index 25de64c43c..f94e87e728 100644
--- a/target/arm/m_helper.c
+++ b/target/arm/m_helper.c
@@ -18,6 +18,9 @@ 
 #include "exec/cpu_ldst.h"
 #include "semihosting/common-semi.h"
 #endif
+#if !defined(CONFIG_USER_ONLY)
+#include "hw/intc/armv7m_nvic.h"
+#endif
 
 static void v7m_msr_xpsr(CPUARMState *env, uint32_t mask,
                          uint32_t reg, uint32_t val)