diff mbox series

[PULL,01/10] target/arm: Mark registers which call pmu_op_start() as ARM_CP_IO

Message ID 20220930133511.2112734-2-peter.maydell@linaro.org
State Accepted
Commit 7f4fbfb5dc08fe3fb6829bde8e4072d6cb214931
Headers show
Series [PULL,01/10] target/arm: Mark registers which call pmu_op_start() as ARM_CP_IO | expand

Commit Message

Peter Maydell Sept. 30, 2022, 1:35 p.m. UTC
In commit 01765386a888 we made some system register write functions
call pmu_op_start()/pmu_op_finish(). This means that they now touch
timers, so for icount to work these registers must have the ARM_CP_IO
flag set.

This fixes a bug where when icount is enabled a guest that touches
MDCR_EL3, MDCR_EL2, PMCNTENSET_EL0 or PMCNTENCLR_EL0 would cause
QEMU to print an error message and exit, for example:

[    2.495971] TCP: Hash tables configured (established 1024 bind 1024)
[    2.496213] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    2.496386] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    2.496917] NET: Registered protocol family 1
qemu-system-aarch64: Bad icount read

Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220923123412.1214041-2-peter.maydell@linaro.org
---
 target/arm/helper.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/target/arm/helper.c b/target/arm/helper.c
index b5dac651e75..fadeed0b6bb 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -1927,12 +1927,12 @@  static const ARMCPRegInfo v7_cp_reginfo[] = {
      * or PL0_RO as appropriate and then check PMUSERENR in the helper fn.
      */
     { .name = "PMCNTENSET", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 1,
-      .access = PL0_RW, .type = ARM_CP_ALIAS,
+      .access = PL0_RW, .type = ARM_CP_ALIAS | ARM_CP_IO,
       .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmcnten),
       .writefn = pmcntenset_write,
       .accessfn = pmreg_access,
       .raw_writefn = raw_write },
-    { .name = "PMCNTENSET_EL0", .state = ARM_CP_STATE_AA64,
+    { .name = "PMCNTENSET_EL0", .state = ARM_CP_STATE_AA64, .type = ARM_CP_IO,
       .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 1,
       .access = PL0_RW, .accessfn = pmreg_access,
       .fieldoffset = offsetof(CPUARMState, cp15.c9_pmcnten), .resetvalue = 0,
@@ -1942,11 +1942,11 @@  static const ARMCPRegInfo v7_cp_reginfo[] = {
       .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmcnten),
       .accessfn = pmreg_access,
       .writefn = pmcntenclr_write,
-      .type = ARM_CP_ALIAS },
+      .type = ARM_CP_ALIAS | ARM_CP_IO },
     { .name = "PMCNTENCLR_EL0", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 2,
       .access = PL0_RW, .accessfn = pmreg_access,
-      .type = ARM_CP_ALIAS,
+      .type = ARM_CP_ALIAS | ARM_CP_IO,
       .fieldoffset = offsetof(CPUARMState, cp15.c9_pmcnten),
       .writefn = pmcntenclr_write },
     { .name = "PMOVSR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 3,
@@ -5125,7 +5125,7 @@  static const ARMCPRegInfo v8_cp_reginfo[] = {
       .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 3, .opc2 = 1,
       .resetvalue = 0,
       .access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.mdcr_el3) },
-    { .name = "SDCR", .type = ARM_CP_ALIAS,
+    { .name = "SDCR", .type = ARM_CP_ALIAS | ARM_CP_IO,
       .cp = 15, .opc1 = 0, .crn = 1, .crm = 3, .opc2 = 1,
       .access = PL1_RW, .accessfn = access_trap_aa32s_el1,
       .writefn = sdcr_write,
@@ -7832,7 +7832,7 @@  void register_cp_regs_for_features(ARMCPU *cpu)
          * value is MDCR_EL2.HPMN which should reset to the value of PMCR_EL0.N.
          */
         ARMCPRegInfo mdcr_el2 = {
-            .name = "MDCR_EL2", .state = ARM_CP_STATE_BOTH,
+            .name = "MDCR_EL2", .state = ARM_CP_STATE_BOTH, .type = ARM_CP_IO,
             .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 1,
             .writefn = mdcr_el2_write,
             .access = PL2_RW, .resetvalue = pmu_num_counters(env),