@@ -44,6 +44,7 @@ Supported devices
* Analog to Digital Converter (ADC)
* Pulse Width Modulation (PWM)
* SMBus controller (SMBF)
+ * Ethernet controller (EMC)
Missing devices
---------------
@@ -57,7 +58,7 @@ Missing devices
* Shared memory (SHM)
* eSPI slave interface
- * Ethernet controllers (GMAC and EMC)
+ * Ethernet controller (GMAC)
* USB device (USBD)
* Peripheral SPI controller (PSPI)
* SD/MMC host
@@ -26,6 +26,7 @@
#include "hw/misc/npcm7xx_gcr.h"
#include "hw/misc/npcm7xx_pwm.h"
#include "hw/misc/npcm7xx_rng.h"
+#include "hw/net/npcm7xx_emc.h"
#include "hw/nvram/npcm7xx_otp.h"
#include "hw/timer/npcm7xx_timer.h"
#include "hw/ssi/npcm7xx_fiu.h"
@@ -90,6 +91,7 @@ typedef struct NPCM7xxState {
EHCISysBusState ehci;
OHCISysBusState ohci;
NPCM7xxFIUState fiu[2];
+ NPCM7xxEMCState emc[2];
} NPCM7xxState;
#define TYPE_NPCM7XX "npcm7xx"
@@ -82,6 +82,8 @@ enum NPCM7xxInterrupt {
NPCM7XX_UART1_IRQ,
NPCM7XX_UART2_IRQ,
NPCM7XX_UART3_IRQ,
+ NPCM7XX_EMC1RX_IRQ = 15,
+ NPCM7XX_EMC1TX_IRQ,
NPCM7XX_TIMER0_IRQ = 32, /* Timer Module 0 */
NPCM7XX_TIMER1_IRQ,
NPCM7XX_TIMER2_IRQ,
@@ -120,6 +122,8 @@ enum NPCM7xxInterrupt {
NPCM7XX_SMBUS15_IRQ,
NPCM7XX_PWM0_IRQ = 93, /* PWM module 0 */
NPCM7XX_PWM1_IRQ, /* PWM module 1 */
+ NPCM7XX_EMC2RX_IRQ = 114,
+ NPCM7XX_EMC2TX_IRQ,
NPCM7XX_GPIO0_IRQ = 116,
NPCM7XX_GPIO1_IRQ,
NPCM7XX_GPIO2_IRQ,
@@ -188,6 +192,12 @@ static const hwaddr npcm7xx_smbus_addr[] = {
0xf008f000,
};
+/* Register base address for each EMC Module */
+static const hwaddr npcm7xx_emc_addr[] = {
+ 0xf0825000,
+ 0xf0826000,
+};
+
static const struct {
hwaddr regs_addr;
uint32_t unconnected_pins;
@@ -406,6 +416,10 @@ static void npcm7xx_init(Object *obj)
for (i = 0; i < ARRAY_SIZE(s->pwm); i++) {
object_initialize_child(obj, "pwm[*]", &s->pwm[i], TYPE_NPCM7XX_PWM);
}
+
+ for (i = 0; i < ARRAY_SIZE(s->emc); i++) {
+ object_initialize_child(obj, "emc[*]", &s->emc[i], TYPE_NPCM7XX_EMC);
+ }
}
static void npcm7xx_realize(DeviceState *dev, Error **errp)
@@ -589,6 +603,40 @@ static void npcm7xx_realize(DeviceState *dev, Error **errp)
sysbus_connect_irq(sbd, i, npcm7xx_irq(s, NPCM7XX_PWM0_IRQ + i));
}
+ /*
+ * EMC Modules. Cannot fail.
+ * The mapping of the device to its netdev backend works as follows:
+ * emc[i] = nd_table[i]
+ * This works around the inability to specify the netdev property for the
+ * emc device: it's not pluggable and thus the -device option can't be
+ * used.
+ */
+ QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_emc_addr) != ARRAY_SIZE(s->emc));
+ QEMU_BUILD_BUG_ON(ARRAY_SIZE(s->emc) != 2);
+ for (i = 0; i < ARRAY_SIZE(s->emc); i++) {
+ s->emc[i].emc_num = i;
+ SysBusDevice *sbd = SYS_BUS_DEVICE(&s->emc[i]);
+ if (nd_table[i].used) {
+ qemu_check_nic_model(&nd_table[i], TYPE_NPCM7XX_EMC);
+ qdev_set_nic_properties(DEVICE(sbd), &nd_table[i]);
+ }
+ /*
+ * The device exists regardless of whether it's connected to a QEMU
+ * netdev backend. So always instantiate it even if there is no
+ * backend.
+ */
+ sysbus_realize(sbd, &error_abort);
+ sysbus_mmio_map(sbd, 0, npcm7xx_emc_addr[i]);
+ int tx_irq = i == 0 ? NPCM7XX_EMC1TX_IRQ : NPCM7XX_EMC2TX_IRQ;
+ int rx_irq = i == 0 ? NPCM7XX_EMC1RX_IRQ : NPCM7XX_EMC2RX_IRQ;
+ /*
+ * N.B. The values for the second argument sysbus_connect_irq are
+ * chosen to match the registration order in npcm7xx_emc_realize.
+ */
+ sysbus_connect_irq(sbd, 0, npcm7xx_irq(s, tx_irq));
+ sysbus_connect_irq(sbd, 1, npcm7xx_irq(s, rx_irq));
+ }
+
/*
* Flash Interface Unit (FIU). Can fail if incorrect number of chip selects
* specified, but this is a programming error.
@@ -649,8 +697,6 @@ static void npcm7xx_realize(DeviceState *dev, Error **errp)
create_unimplemented_device("npcm7xx.vcd", 0xf0810000, 64 * KiB);
create_unimplemented_device("npcm7xx.ece", 0xf0820000, 8 * KiB);
create_unimplemented_device("npcm7xx.vdma", 0xf0822000, 8 * KiB);
- create_unimplemented_device("npcm7xx.emc1", 0xf0825000, 4 * KiB);
- create_unimplemented_device("npcm7xx.emc2", 0xf0826000, 4 * KiB);
create_unimplemented_device("npcm7xx.usbd[0]", 0xf0830000, 4 * KiB);
create_unimplemented_device("npcm7xx.usbd[1]", 0xf0831000, 4 * KiB);
create_unimplemented_device("npcm7xx.usbd[2]", 0xf0832000, 4 * KiB);