diff mbox series

[PULL,07/20] aspeed/sdhci: Fix reset sequence

Message ID 20200901124525.220252-8-clg@kaod.org
State Superseded
Headers show
Series [PULL,01/20] m25p80: Return the JEDEC ID twice for mx25l25635e | expand

Commit Message

Cédric Le Goater Sept. 1, 2020, 12:45 p.m. UTC 
BIT(0) of the ASPEED_SDHCI_INFO register is set by SW and polled until
the bit is cleared by HW.

Use the number of supported slots to define the default value of this
register (The AST2600 eMMC Controller only has one). Fix the reset
sequence by clearing automatically the RESET bit.

Cc: Eddie James <eajames@linux.ibm.com>
Fixes: 2bea128c3d0b ("hw/sd/aspeed_sdhci: New device")
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20200819100956.2216690-9-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
 hw/sd/aspeed_sdhci.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/hw/sd/aspeed_sdhci.c b/hw/sd/aspeed_sdhci.c
index 22cafce0fbdc..4f24b7d2f942 100644
--- a/hw/sd/aspeed_sdhci.c
+++ b/hw/sd/aspeed_sdhci.c
@@ -16,7 +16,9 @@ 
 #include "hw/qdev-properties.h"
 
 #define ASPEED_SDHCI_INFO            0x00
-#define  ASPEED_SDHCI_INFO_RESET     0x00030000
+#define  ASPEED_SDHCI_INFO_SLOT1     (1 << 17)
+#define  ASPEED_SDHCI_INFO_SLOT0     (1 << 16)
+#define  ASPEED_SDHCI_INFO_RESET     (1 << 0)
 #define ASPEED_SDHCI_DEBOUNCE        0x04
 #define  ASPEED_SDHCI_DEBOUNCE_RESET 0x00000005
 #define ASPEED_SDHCI_BUS             0x08
@@ -67,6 +69,10 @@  static void aspeed_sdhci_write(void *opaque, hwaddr addr, uint64_t val,
     AspeedSDHCIState *sdhci = opaque;
 
     switch (addr) {
+    case ASPEED_SDHCI_INFO:
+        /* The RESET bit automatically clears. */
+        sdhci->regs[TO_REG(addr)] = (uint32_t)val & ~ASPEED_SDHCI_INFO_RESET;
+        break;
     case ASPEED_SDHCI_SDIO_140:
         sdhci->slots[0].capareg = (uint64_t)(uint32_t)val;
         break;
@@ -155,7 +161,11 @@  static void aspeed_sdhci_reset(DeviceState *dev)
     AspeedSDHCIState *sdhci = ASPEED_SDHCI(dev);
 
     memset(sdhci->regs, 0, ASPEED_SDHCI_REG_SIZE);
-    sdhci->regs[TO_REG(ASPEED_SDHCI_INFO)] = ASPEED_SDHCI_INFO_RESET;
+
+    sdhci->regs[TO_REG(ASPEED_SDHCI_INFO)] = ASPEED_SDHCI_INFO_SLOT0;
+    if (sdhci->num_slots == 2) {
+        sdhci->regs[TO_REG(ASPEED_SDHCI_INFO)] |= ASPEED_SDHCI_INFO_SLOT1;
+    }
     sdhci->regs[TO_REG(ASPEED_SDHCI_DEBOUNCE)] = ASPEED_SDHCI_DEBOUNCE_RESET;
 }