diff mbox series

[PULL,4/7] softfloat: Define operations for bfloat16

Message ID 20200830023203.612312-5-richard.henderson@linaro.org
State New
Headers show
Series softfloat patch queue | expand

Commit Message

Richard Henderson Aug. 30, 2020, 2:32 a.m. UTC
From: LIU Zhiwei <zhiwei_liu@c-sky.com>


This patch implements operations for bfloat16 except conversion and some misc
operations. We also add FloatFmt and pack/unpack interfaces for bfloat16.
As they are both static fields, we can't make a sperate patch for them.

Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

Message-Id: <20200813071421.2509-2-zhiwei_liu@c-sky.com>
[rth: Use FloatRelation for comparison operations.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

---
 include/fpu/softfloat-types.h |   5 +
 include/fpu/softfloat.h       |  38 ++++++++
 fpu/softfloat.c               | 168 ++++++++++++++++++++++++++++++++++
 3 files changed, 211 insertions(+)

-- 
2.25.1
diff mbox series

Patch

diff --git a/include/fpu/softfloat-types.h b/include/fpu/softfloat-types.h
index c7ddcab8ca..8a3f20fae9 100644
--- a/include/fpu/softfloat-types.h
+++ b/include/fpu/softfloat-types.h
@@ -112,6 +112,11 @@  typedef struct {
 #define make_float128(high_, low_) ((float128) { .high = high_, .low = low_ })
 #define make_float128_init(high_, low_) { .high = high_, .low = low_ }
 
+/*
+ * Software neural-network floating-point types.
+ */
+typedef uint16_t bfloat16;
+
 /*
  * Software IEC/IEEE floating-point underflow tininess-detection mode.
  */
diff --git a/include/fpu/softfloat.h b/include/fpu/softfloat.h
index 863dfc6151..68b3cf488d 100644
--- a/include/fpu/softfloat.h
+++ b/include/fpu/softfloat.h
@@ -109,6 +109,7 @@  void float_raise(uint8_t flags, float_status *status);
 float16 float16_squash_input_denormal(float16 a, float_status *status);
 float32 float32_squash_input_denormal(float32 a, float_status *status);
 float64 float64_squash_input_denormal(float64 a, float_status *status);
+bfloat16 bfloat16_squash_input_denormal(bfloat16 a, float_status *status);
 
 /*----------------------------------------------------------------------------
 | Options to indicate which negations to perform in float*_muladd()
@@ -347,6 +348,43 @@  static inline bool float16_unordered_quiet(float16 a, float16 b,
 #define float16_three make_float16(0x4200)
 #define float16_infinity make_float16(0x7c00)
 
+/*----------------------------------------------------------------------------
+| Software bfloat16 operations.
+*----------------------------------------------------------------------------*/
+
+bfloat16 bfloat16_add(bfloat16, bfloat16, float_status *status);
+bfloat16 bfloat16_sub(bfloat16, bfloat16, float_status *status);
+bfloat16 bfloat16_mul(bfloat16, bfloat16, float_status *status);
+bfloat16 bfloat16_div(bfloat16, bfloat16, float_status *status);
+bfloat16 bfloat16_muladd(bfloat16, bfloat16, bfloat16, int,
+                         float_status *status);
+float16 bfloat16_scalbn(bfloat16, int, float_status *status);
+bfloat16 bfloat16_min(bfloat16, bfloat16, float_status *status);
+bfloat16 bfloat16_max(bfloat16, bfloat16, float_status *status);
+bfloat16 bfloat16_minnum(bfloat16, bfloat16, float_status *status);
+bfloat16 bfloat16_maxnum(bfloat16, bfloat16, float_status *status);
+bfloat16 bfloat16_minnummag(bfloat16, bfloat16, float_status *status);
+bfloat16 bfloat16_maxnummag(bfloat16, bfloat16, float_status *status);
+bfloat16 bfloat16_sqrt(bfloat16, float_status *status);
+FloatRelation bfloat16_compare(bfloat16, bfloat16, float_status *status);
+FloatRelation bfloat16_compare_quiet(bfloat16, bfloat16, float_status *status);
+
+bfloat16 bfloat16_silence_nan(bfloat16, float_status *status);
+bfloat16 bfloat16_default_nan(float_status *status);
+
+static inline bfloat16 bfloat16_set_sign(bfloat16 a, int sign)
+{
+    return (a & 0x7fff) | (sign << 15);
+}
+
+#define bfloat16_zero 0
+#define bfloat16_half 0x3f00
+#define bfloat16_one 0x3f80
+#define bfloat16_one_point_five 0x3fc0
+#define bfloat16_two 0x4000
+#define bfloat16_three 0x4040
+#define bfloat16_infinity 0x7f80
+
 /*----------------------------------------------------------------------------
 | The pattern for a default generated half-precision NaN.
 *----------------------------------------------------------------------------*/
diff --git a/fpu/softfloat.c b/fpu/softfloat.c
index 64de0b40f7..77d81ab9b0 100644
--- a/fpu/softfloat.c
+++ b/fpu/softfloat.c
@@ -554,6 +554,10 @@  static const FloatFmt float16_params_ahp = {
     .arm_althp = true
 };
 
+static const FloatFmt bfloat16_params = {
+    FLOAT_PARAMS(8, 7)
+};
+
 static const FloatFmt float32_params = {
     FLOAT_PARAMS(8, 23)
 };
@@ -580,6 +584,11 @@  static inline FloatParts float16_unpack_raw(float16 f)
     return unpack_raw(float16_params, f);
 }
 
+static inline FloatParts bfloat16_unpack_raw(bfloat16 f)
+{
+    return unpack_raw(bfloat16_params, f);
+}
+
 static inline FloatParts float32_unpack_raw(float32 f)
 {
     return unpack_raw(float32_params, f);
@@ -603,6 +612,11 @@  static inline float16 float16_pack_raw(FloatParts p)
     return make_float16(pack_raw(float16_params, p));
 }
 
+static inline bfloat16 bfloat16_pack_raw(FloatParts p)
+{
+    return pack_raw(bfloat16_params, p);
+}
+
 static inline float32 float32_pack_raw(FloatParts p)
 {
     return make_float32(pack_raw(float32_params, p));
@@ -820,6 +834,11 @@  static FloatParts float16_unpack_canonical(float16 f, float_status *s)
     return float16a_unpack_canonical(f, s, &float16_params);
 }
 
+static FloatParts bfloat16_unpack_canonical(bfloat16 f, float_status *s)
+{
+    return sf_canonicalize(bfloat16_unpack_raw(f), &bfloat16_params, s);
+}
+
 static float16 float16a_round_pack_canonical(FloatParts p, float_status *s,
                                              const FloatFmt *params)
 {
@@ -831,6 +850,11 @@  static float16 float16_round_pack_canonical(FloatParts p, float_status *s)
     return float16a_round_pack_canonical(p, s, &float16_params);
 }
 
+static bfloat16 bfloat16_round_pack_canonical(FloatParts p, float_status *s)
+{
+    return bfloat16_pack_raw(round_canonical(p, s, &bfloat16_params));
+}
+
 static FloatParts float32_unpack_canonical(float32 f, float_status *s)
 {
     return sf_canonicalize(float32_unpack_raw(f), &float32_params, s);
@@ -1158,6 +1182,28 @@  float64_sub(float64 a, float64 b, float_status *s)
     return float64_addsub(a, b, s, hard_f64_sub, soft_f64_sub);
 }
 
+/*
+ * Returns the result of adding or subtracting the bfloat16
+ * values `a' and `b'.
+ */
+bfloat16 QEMU_FLATTEN bfloat16_add(bfloat16 a, bfloat16 b, float_status *status)
+{
+    FloatParts pa = bfloat16_unpack_canonical(a, status);
+    FloatParts pb = bfloat16_unpack_canonical(b, status);
+    FloatParts pr = addsub_floats(pa, pb, false, status);
+
+    return bfloat16_round_pack_canonical(pr, status);
+}
+
+bfloat16 QEMU_FLATTEN bfloat16_sub(bfloat16 a, bfloat16 b, float_status *status)
+{
+    FloatParts pa = bfloat16_unpack_canonical(a, status);
+    FloatParts pb = bfloat16_unpack_canonical(b, status);
+    FloatParts pr = addsub_floats(pa, pb, true, status);
+
+    return bfloat16_round_pack_canonical(pr, status);
+}
+
 /*
  * Returns the result of multiplying the floating-point values `a' and
  * `b'. The operation is performed according to the IEC/IEEE Standard
@@ -1260,6 +1306,20 @@  float64_mul(float64 a, float64 b, float_status *s)
                         f64_is_zon2, f64_addsubmul_post);
 }
 
+/*
+ * Returns the result of multiplying the bfloat16
+ * values `a' and `b'.
+ */
+
+bfloat16 QEMU_FLATTEN bfloat16_mul(bfloat16 a, bfloat16 b, float_status *status)
+{
+    FloatParts pa = bfloat16_unpack_canonical(a, status);
+    FloatParts pb = bfloat16_unpack_canonical(b, status);
+    FloatParts pr = mul_floats(pa, pb, status);
+
+    return bfloat16_round_pack_canonical(pr, status);
+}
+
 /*
  * Returns the result of multiplying the floating-point values `a' and
  * `b' then adding 'c', with no intermediate rounding step after the
@@ -1642,6 +1702,23 @@  float64_muladd(float64 xa, float64 xb, float64 xc, int flags, float_status *s)
     return soft_f64_muladd(ua.s, ub.s, uc.s, flags, s);
 }
 
+/*
+ * Returns the result of multiplying the bfloat16 values `a'
+ * and `b' then adding 'c', with no intermediate rounding step after the
+ * multiplication.
+ */
+
+bfloat16 QEMU_FLATTEN bfloat16_muladd(bfloat16 a, bfloat16 b, bfloat16 c,
+                                      int flags, float_status *status)
+{
+    FloatParts pa = bfloat16_unpack_canonical(a, status);
+    FloatParts pb = bfloat16_unpack_canonical(b, status);
+    FloatParts pc = bfloat16_unpack_canonical(c, status);
+    FloatParts pr = muladd_floats(pa, pb, pc, flags, status);
+
+    return bfloat16_round_pack_canonical(pr, status);
+}
+
 /*
  * Returns the result of dividing the floating-point value `a' by the
  * corresponding value `b'. The operation is performed according to
@@ -1808,6 +1885,20 @@  float64_div(float64 a, float64 b, float_status *s)
                         f64_div_pre, f64_div_post);
 }
 
+/*
+ * Returns the result of dividing the bfloat16
+ * value `a' by the corresponding value `b'.
+ */
+
+bfloat16 bfloat16_div(bfloat16 a, bfloat16 b, float_status *status)
+{
+    FloatParts pa = bfloat16_unpack_canonical(a, status);
+    FloatParts pb = bfloat16_unpack_canonical(b, status);
+    FloatParts pr = div_floats(pa, pb, status);
+
+    return bfloat16_round_pack_canonical(pr, status);
+}
+
 /*
  * Float to Float conversions
  *
@@ -2881,6 +2972,25 @@  MINMAX(64, maxnummag, false, true, true)
 
 #undef MINMAX
 
+#define BF16_MINMAX(name, ismin, isiee, ismag)                          \
+bfloat16 bfloat16_ ## name(bfloat16 a, bfloat16 b, float_status *s)     \
+{                                                                       \
+    FloatParts pa = bfloat16_unpack_canonical(a, s);                    \
+    FloatParts pb = bfloat16_unpack_canonical(b, s);                    \
+    FloatParts pr = minmax_floats(pa, pb, ismin, isiee, ismag, s);      \
+                                                                        \
+    return bfloat16_round_pack_canonical(pr, s);                        \
+}
+
+BF16_MINMAX(min, true, false, false)
+BF16_MINMAX(minnum, true, true, false)
+BF16_MINMAX(minnummag, true, true, true)
+BF16_MINMAX(max, false, false, false)
+BF16_MINMAX(maxnum, false, true, false)
+BF16_MINMAX(maxnummag, false, true, true)
+
+#undef BF16_MINMAX
+
 /* Floating point compare */
 static FloatRelation compare_floats(FloatParts a, FloatParts b, bool is_quiet,
                                     float_status *s)
@@ -3042,6 +3152,24 @@  FloatRelation float64_compare_quiet(float64 a, float64 b, float_status *s)
     return f64_compare(a, b, true, s);
 }
 
+static FloatRelation QEMU_FLATTEN
+soft_bf16_compare(bfloat16 a, bfloat16 b, bool is_quiet, float_status *s)
+{
+    FloatParts pa = bfloat16_unpack_canonical(a, s);
+    FloatParts pb = bfloat16_unpack_canonical(b, s);
+    return compare_floats(pa, pb, is_quiet, s);
+}
+
+FloatRelation bfloat16_compare(bfloat16 a, bfloat16 b, float_status *s)
+{
+    return soft_bf16_compare(a, b, false, s);
+}
+
+FloatRelation bfloat16_compare_quiet(bfloat16 a, bfloat16 b, float_status *s)
+{
+    return soft_bf16_compare(a, b, true, s);
+}
+
 /* Multiply A by 2 raised to the power N.  */
 static FloatParts scalbn_decomposed(FloatParts a, int n, float_status *s)
 {
@@ -3081,6 +3209,13 @@  float64 float64_scalbn(float64 a, int n, float_status *status)
     return float64_round_pack_canonical(pr, status);
 }
 
+bfloat16 bfloat16_scalbn(bfloat16 a, int n, float_status *status)
+{
+    FloatParts pa = bfloat16_unpack_canonical(a, status);
+    FloatParts pr = scalbn_decomposed(pa, n, status);
+    return bfloat16_round_pack_canonical(pr, status);
+}
+
 /*
  * Square Root
  *
@@ -3231,6 +3366,13 @@  float64 QEMU_FLATTEN float64_sqrt(float64 xa, float_status *s)
     return soft_f64_sqrt(ua.s, s);
 }
 
+bfloat16 QEMU_FLATTEN bfloat16_sqrt(bfloat16 a, float_status *status)
+{
+    FloatParts pa = bfloat16_unpack_canonical(a, status);
+    FloatParts pr = sqrt_float(pa, status, &bfloat16_params);
+    return bfloat16_round_pack_canonical(pr, status);
+}
+
 /*----------------------------------------------------------------------------
 | The pattern for a default generated NaN.
 *----------------------------------------------------------------------------*/
@@ -3273,6 +3415,13 @@  float128 float128_default_nan(float_status *status)
     return r;
 }
 
+bfloat16 bfloat16_default_nan(float_status *status)
+{
+    FloatParts p = parts_default_nan(status);
+    p.frac >>= bfloat16_params.frac_shift;
+    return bfloat16_pack_raw(p);
+}
+
 /*----------------------------------------------------------------------------
 | Returns a quiet NaN from a signalling NaN for the floating point value `a'.
 *----------------------------------------------------------------------------*/
@@ -3304,6 +3453,14 @@  float64 float64_silence_nan(float64 a, float_status *status)
     return float64_pack_raw(p);
 }
 
+bfloat16 bfloat16_silence_nan(bfloat16 a, float_status *status)
+{
+    FloatParts p = bfloat16_unpack_raw(a);
+    p.frac <<= bfloat16_params.frac_shift;
+    p = parts_silence_nan(p, status);
+    p.frac >>= bfloat16_params.frac_shift;
+    return bfloat16_pack_raw(p);
+}
 
 /*----------------------------------------------------------------------------
 | If `a' is denormal and we are in flush-to-zero mode then set the
@@ -3353,6 +3510,17 @@  float64 float64_squash_input_denormal(float64 a, float_status *status)
     return a;
 }
 
+bfloat16 bfloat16_squash_input_denormal(bfloat16 a, float_status *status)
+{
+    if (status->flush_inputs_to_zero) {
+        FloatParts p = bfloat16_unpack_raw(a);
+        if (parts_squash_denormal(p, status)) {
+            return bfloat16_set_sign(bfloat16_zero, p.sign);
+        }
+    }
+    return a;
+}
+
 /*----------------------------------------------------------------------------
 | Takes a 64-bit fixed-point value `absZ' with binary point between bits 6
 | and 7, and returns the properly rounded 32-bit integer corresponding to the