@@ -265,9 +265,9 @@ build-tci:
- make run-tcg-tests-x86_64-softmmu
- make tests/qtest/boot-serial-test tests/qtest/cdrom-test tests/qtest/pxe-test
- for tg in $TARGETS ; do
- export QTEST_QEMU_BINARY="${tg}-softmmu/qemu-system-${tg}" ;
+ export QTEST_QEMU_BINARY="./qemu-system-${tg}" ;
./tests/qtest/boot-serial-test || exit 1 ;
./tests/qtest/cdrom-test || exit 1 ;
done
- - QTEST_QEMU_BINARY="x86_64-softmmu/qemu-system-x86_64" ./tests/qtest/pxe-test
- - QTEST_QEMU_BINARY="s390x-softmmu/qemu-system-s390x" ./tests/qtest/pxe-test -m slow
+ - QTEST_QEMU_BINARY="./qemu-system-x86_64" ./tests/qtest/pxe-test
+ - QTEST_QEMU_BINARY="./qemu-system-s390x" ./tests/qtest/pxe-test -m slow
@@ -112,9 +112,6 @@ include $(SRC_PATH)/rules.mak
# lor is defined in rules.mak
CONFIG_BLOCK := $(call lor,$(CONFIG_SOFTMMU),$(CONFIG_TOOLS))
-generated-files-y += target/s390x/gen-features.h
-target/s390x/gen-features.h: Makefile.ninja
-
generated-files-y += .git-submodule-status
# Don't try to regenerate Makefile or configure
@@ -178,29 +175,6 @@ config-host.h-timestamp: config-host.mak
TARGET_DIRS_RULES := $(foreach t, all fuzz clean install, $(addsuffix /$(t), $(TARGET_DIRS)))
-SOFTMMU_ALL_RULES=$(filter %-softmmu/all, $(TARGET_DIRS_RULES))
-$(SOFTMMU_ALL_RULES): $(authz-obj-y)
-$(SOFTMMU_ALL_RULES): $(block-obj-y)
-$(SOFTMMU_ALL_RULES): $(chardev-obj-y)
-$(SOFTMMU_ALL_RULES): $(crypto-obj-y)
-$(SOFTMMU_ALL_RULES): $(io-obj-y)
-$(SOFTMMU_ALL_RULES): $(qom-obj-y)
-$(SOFTMMU_ALL_RULES): config-all-devices.mak
-
-SOFTMMU_FUZZ_RULES=$(filter %-softmmu/fuzz, $(TARGET_DIRS_RULES))
-$(SOFTMMU_FUZZ_RULES): $(authz-obj-y)
-$(SOFTMMU_FUZZ_RULES): $(block-obj-y)
-$(SOFTMMU_FUZZ_RULES): $(chardev-obj-y)
-$(SOFTMMU_FUZZ_RULES): $(crypto-obj-y)
-$(SOFTMMU_FUZZ_RULES): $(io-obj-y)
-$(SOFTMMU_FUZZ_RULES): config-all-devices.mak
-$(SOFTMMU_FUZZ_RULES): $(edk2-decompressed)
-
-# meson: this is sub-optimal but going away after conversion
-TARGET_DEPS = $(patsubst %,%-config-target.h, $(TARGET_DIRS))
-TARGET_DEPS += $(patsubst %,%-config-devices.h, $(filter %-softmmu,$(TARGET_DIRS)))
-TARGET_DEPS += $(patsubst %,libqemu-%.fa, $(TARGET_DIRS))
-
.PHONY: $(TARGET_DIRS_RULES)
# The $(TARGET_DIRS_RULES) are of the form SUBDIR/GOAL, so that
# $(dir $@) yields the sub-directory, and $(notdir $@) yields the sub-goal
@@ -243,11 +217,7 @@ slirp/all: .git-submodule-status
CC="$(CC)" AR="$(AR)" LD="$(LD)" RANLIB="$(RANLIB)" \
CFLAGS="$(QEMU_CFLAGS) $(CFLAGS)" LDFLAGS="$(QEMU_LDFLAGS)")
-$(filter %/all, $(TARGET_DIRS_RULES)): libqemuutil.a $(common-obj-y) \
- $(qom-obj-y) block.syms qemu.syms
-
-$(filter %/fuzz, $(TARGET_DIRS_RULES)): libqemuutil.a $(common-obj-y) \
- $(qom-obj-y) $(crypto-user-obj-$(CONFIG_USER_ONLY))
+$(filter %/all, $(TARGET_DIRS_RULES)):
ROM_DIRS = $(addprefix pc-bios/, $(ROMS))
ROM_DIRS_RULES=$(foreach t, all clean, $(addsuffix /$(t), $(ROM_DIRS)))
@@ -269,8 +239,6 @@ Makefile: $(version-obj-y)
######################################################################
-COMMON_LDADDS = libqemuutil.a
-
clean: recurse-clean ninja-clean clean-ctlist
-test -f ninjatool && ./ninjatool $(if $(V),-v,) -t clean
# avoid old build problems by removing potentially incorrect old files
@@ -304,6 +272,7 @@ distclean: clean ninja-distclean
rm -f po/*.mo tests/qemu-iotests/common.env
rm -f roms/seabios/config.mak roms/vgabios/config.mak
rm -f qemu-plugins-ld.symbols qemu-plugins-ld64.symbols
+ rm -f *-config-target.h *-config-devices.mak *-config-devices.h
rm -rf meson-private meson-logs meson-info compile_commands.json
rm -f Makefile.ninja ninjatool ninjatool.stamp Makefile.mtest
rm -f config.log
@@ -33,38 +33,6 @@ io-obj-y = io/libio.fa
endif # CONFIG_SOFTMMU or CONFIG_TOOLS
-######################################################################
-# Target independent part of system emulation. The long term path is to
-# suppress *all* target specific code in case of system emulation, i.e. a
-# single QEMU executable should support all CPUs and machines.
-
-ifeq ($(CONFIG_SOFTMMU),y)
-common-obj-y =
-
-common-obj-$(CONFIG_AUDIO_ALSA) += audio-alsa$(DSOSUF)
-common-obj-$(CONFIG_AUDIO_OSS) += audio-oss$(DSOSUF)
-common-obj-$(CONFIG_AUDIO_PA) += audio-pa$(DSOSUF)
-common-obj-$(CONFIG_AUDIO_SDL) += audio-sdl$(DSOSUF)
-
-common-obj-$(if $(CONFIG_CURSES),m) += ui-curses$(DSOSUF)
-common-obj-$(if $(CONFIG_GTK),m) += ui-gtk$(DSOSUF)
-common-obj-$(if $(CONFIG_SDL),m) += ui-sdl$(DSOSUF)
-common-obj-$(if $(CONFIG_SPICE),m) += ui-spice-app$(DSOSUF)
-
-common-obj-$(if $(CONFIG_CURL),m) += block-curl$(DSOSUF)
-common-obj-$(if $(CONFIG_GLUSTERFS),m) += block-gluster$(DSOSUF)
-common-obj-$(if $(CONFIG_LIBISCSI),m) += block-iscsi$(DSOSUF)
-common-obj-$(if $(CONFIG_LIBNFS),m) += block-nfs$(DSOSUF)
-common-obj-$(if $(CONFIG_LIBSSH),m) += block-ssh$(DSOSUF)
-common-obj-$(if $(CONFIG_RBD),m) += block-rbd$(DSOSUF)
-
-common-obj-$(if $(CONFIG_LZFSE),m) += block-dmg-lzfse$(DSOSUF)
-common-obj-$(if $(and $(CONFIG_BZIP2),$(CONFIG_DMG)),m) += block-dmg-bz2$(DSOSUF)
-
-common-obj-y += libqmp.fa
-
-endif # CONFIG_SOFTMMU
-
######################################################################
# Resource file for Windows executables
version-obj-$(CONFIG_WIN32) += $(BUILD_DIR)/version.o
@@ -6,43 +6,16 @@ include ../config-host.mak
include config-target.mak
include $(SRC_PATH)/rules.mak
-FULL_TARGET_NAME=$(TARGET_NAME)-$(if $(CONFIG_SOFTMMU),softmmu,linux-user)
-
-ifdef CONFIG_SOFTMMU
-include ../$(FULL_TARGET_NAME)-config-devices.mak
-endif
-
$(call set-vpath, $(SRC_PATH):$(BUILD_DIR))
-ifdef CONFIG_LINUX
-QEMU_CFLAGS += -isystem ../linux-headers
-endif
-QEMU_CFLAGS += -iquote .. -iquote $(SRC_PATH)/target/$(TARGET_BASE_ARCH) -DNEED_CPU_H
-
-QEMU_CFLAGS+=-iquote $(SRC_PATH)/include
-
-QEMU_CFLAGS += -DCONFIG_TARGET=\"../$(FULL_TARGET_NAME)-config-target.h\"
-QEMU_CFLAGS += -DCONFIG_DEVICES=\"../$(FULL_TARGET_NAME)-config-devices.h\"
ifdef CONFIG_USER_ONLY
# user emulator name
QEMU_PROG=qemu-$(TARGET_NAME)
-QEMU_PROG_BUILD = $(QEMU_PROG)
else
# system emulator name
QEMU_PROG=qemu-system-$(TARGET_NAME)$(EXESUF)
-ifneq (,$(findstring -mwindows,$(SDL_LIBS)))
-# Terminate program name with a 'w' because the linker builds a windows executable.
-QEMU_PROGW=qemu-system-$(TARGET_NAME)w$(EXESUF)
-$(QEMU_PROG): $(QEMU_PROGW)
- $(call quiet-command,$(OBJCOPY) --subsystem console $(QEMU_PROGW) $(QEMU_PROG),"GEN","$(TARGET_DIR)$(QEMU_PROG)")
-QEMU_PROG_BUILD = $(QEMU_PROGW)
-else
-QEMU_PROG_BUILD = $(QEMU_PROG)
-endif
endif
-LIBQEMU = ../libqemu-$(FULL_TARGET_NAME).fa
-PROGS=$(QEMU_PROG) $(QEMU_PROGW)
STPFILES=
ifdef CONFIG_TRACE_SYSTEMTAP
@@ -98,109 +71,10 @@ stap:
endif
.PHONY: stap
-all: $(PROGS) stap
-
-# Dummy command so that make thinks it has done something
- @true
-
-obj-y += $(LIBQEMU)
-
-obj-y += trace/
-
-#########################################################
-LIBS := $(libs_cpu) $(LIBS)
-
-#########################################################
-# Linux user emulator target
-
-ifdef CONFIG_LINUX_USER
-
-QEMU_CFLAGS+=-I$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR) \
- -I$(SRC_PATH)/linux-user/host/$(ARCH) \
- -I$(SRC_PATH)/linux-user \
- -Ilinux-user/$(TARGET_ABI_DIR)
-
-endif #CONFIG_LINUX_USER
-
-#########################################################
-# BSD user emulator target
-
-ifdef CONFIG_BSD_USER
-
-QEMU_CFLAGS+=-I$(SRC_PATH)/bsd-user -I$(SRC_PATH)/bsd-user/$(TARGET_ABI_DIR) \
- -I$(SRC_PATH)/bsd-user/$(HOST_VARIANT_DIR)
-
-endif #CONFIG_BSD_USER
-
-#########################################################
-# System emulator target
-ifdef CONFIG_SOFTMMU
-obj-y += softmmu/
-obj-y += gdbstub.o
-LIBS := $(libs_softmmu) $(LIBS)
-
-# Temporary until emulators are linked by Meson
-LIBS := $(LIBS) @../block.syms @../qemu.syms
-ifneq ($(CONFIG_MODULES),y)
-LIBS := $(LIBS) $(ALSA_LIBS) $(OSS_LIBS) $(PULSE_LIBS) $(SDL_LIBS)
-LIBS := $(LIBS) $(GTK_LIBS) $(VTE_LIBS) $(X11_LIBS) $(CURSES_LIBS) $(ICONV_LIBS) $(GIO_LIBS)
-endif
-LIBS := $(LIBS) $(BRLAPI_LIBS) $(SDL_LIBS) $(SPICE_LIBS) $(OPENGL_LIBS) $(SECCOMP_LIBS)
-LIBS := $(LIBS) $(COREAUDIO_LIBS) $(DSOUND_LIBS)
-LIBS := $(LIBS) $(VDE_LIBS) $(SLIRP_LIBS)
-LIBS := $(LIBS) $(LIBUSB_LIBS) $(SMARTCARD_LIBS) $(USB_REDIR_LIBS)
-LIBS := $(LIBS) $(VIRGL_LIBS) $(CURSES_LIBS)
-
-ifeq ($(CONFIG_PLUGIN),y)
-ifdef CONFIG_HAS_LD_DYNAMIC_LIST
-LIBS += -Wl,--dynamic-list=$(BUILD_DIR)/qemu-plugins-ld.symbols
-else
-ifdef CONFIG_HAS_LD_EXPORTED_SYMBOLS_LIST
-LIBS += -Wl,-exported_symbols_list,$(BUILD_DIR)/qemu-plugins-ld64.symbols
-endif
-endif
-endif
-
-generated-files-y += hmp-commands.h hmp-commands-info.h
-
-endif # CONFIG_SOFTMMU
-
-dummy := $(call unnest-vars,,obj-y)
-all-obj-y := $(obj-y)
-
-include $(SRC_PATH)/Makefile.objs
-dummy := $(call fix-paths,../,, \
- authz-obj-y \
- block-obj-y \
- chardev-obj-y \
- crypto-obj-y \
- io-obj-y \
- qom-obj-y)
-dummy := $(call unnest-vars,..,common-obj-y)
-
-all-obj-y += $(common-obj-y)
-all-obj-y += $(qom-obj-y)
-all-obj-$(CONFIG_SOFTMMU) += $(authz-obj-y)
-all-obj-$(CONFIG_SOFTMMU) += $(block-obj-y) $(chardev-obj-y)
-all-obj-$(CONFIG_SOFTMMU) += $(crypto-obj-y)
-all-obj-$(CONFIG_SOFTMMU) += $(io-obj-y)
-
-ifdef CONFIG_SOFTMMU
-$(QEMU_PROG_BUILD): ../$(FULL_TARGET_NAME)-config-devices.mak
-endif
-
-COMMON_LDADDS = ../libqemuutil.a
-
-# build either PROG or PROGW
-$(QEMU_PROG_BUILD): $(all-obj-y) $(COMMON_LDADDS) $(softmmu-main-y)
- $(call LINK, $(filter-out %.mak, $^))
-ifdef CONFIG_DARWIN
- $(call quiet-command,Rez -append $(SRC_PATH)/pc-bios/qemu.rsrc -o $@,"REZ","$(TARGET_DIR)$@")
- $(call quiet-command,SetFile -a C $@,"SETFILE","$(TARGET_DIR)$@")
-endif
+all: stap
-clean: clean-target
- rm -f *.a *~ $(PROGS)
+clean:
+ rm -f *.a *~
rm -f $(shell find . -name '*.[od]')
rm -f hmp-commands.h gdbstub-xml.c
rm -f trace/generated-helpers.c trace/generated-helpers.c-timestamp
@@ -208,26 +82,7 @@ ifdef CONFIG_TRACE_SYSTEMTAP
rm -f *.stp
endif
-ifdef CONFIG_FUZZ
-include $(SRC_PATH)/tests/qtest/fuzz/Makefile.include
-include $(SRC_PATH)/tests/qtest/Makefile.include
-
-fuzz: fuzz-vars
-fuzz-vars: QEMU_CFLAGS := $(FUZZ_CFLAGS) $(QEMU_CFLAGS)
-fuzz-vars: QEMU_LDFLAGS := $(FUZZ_LDFLAGS) $(QEMU_LDFLAGS)
-fuzz-vars: $(QEMU_PROG_FUZZ)
-dummy := $(call unnest-vars,, fuzz-obj-y)
-
-
-$(QEMU_PROG_FUZZ): config-devices.mak $(all-obj-y) $(COMMON_LDADDS) $(fuzz-obj-y)
- $(call LINK, $(filter-out %.mak, $^))
-
-endif
-
install: all
-ifneq ($(PROGS),)
- $(call install-prog,$(PROGS),$(DESTDIR)$(bindir))
-endif
ifdef CONFIG_TRACE_SYSTEMTAP
$(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset"
$(INSTALL_DATA) $(QEMU_PROG).stp-installed "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset/$(QEMU_PROG).stp"
@@ -235,4 +90,4 @@ ifdef CONFIG_TRACE_SYSTEMTAP
$(INSTALL_DATA) $(QEMU_PROG)-log.stp "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset/$(QEMU_PROG)-log.stp"
endif
-Makefile: $(generated-files-y)
+.PHONY: all clean install
@@ -316,7 +316,6 @@ audio_drv_list=""
block_drv_rw_whitelist=""
block_drv_ro_whitelist=""
host_cc="cc"
-libs_cpu=""
libs_softmmu=""
libs_tools=""
audio_win_int=""
@@ -5428,7 +5427,6 @@ case "$capstone" in
else
LIBCAPSTONE=libcapstone.a
fi
- libs_cpu="-L$PWD/capstone -lcapstone $libs_cpu"
capstone_libs="-L$PWD/capstone -lcapstone"
capstone_cflags="-I${source_path}/capstone/include"
;;
@@ -5437,7 +5435,6 @@ case "$capstone" in
capstone_libs="$($pkg_config --libs capstone)"
capstone_cflags="$($pkg_config --cflags capstone)"
QEMU_CFLAGS="$QEMU_CFLAGS $($pkg_config --cflags capstone)"
- libs_cpu="$($pkg_config --libs capstone) $libs_cpu"
;;
no)
@@ -6354,7 +6351,10 @@ fi
if test "$fuzzing" = "yes" ; then
write_c_fuzzer_skeleton
if compile_prog "$CPU_CFLAGS -Werror -fsanitize=fuzzer" ""; then
- have_fuzzer=yes
+ have_fuzzer=yes
+ else
+ error_exit "Your compiler doesn't support -fsanitize=fuzzer"
+ exit 1
fi
fi
@@ -6866,7 +6866,6 @@ echo "qemu_helperdir=$libexecdir" >> $config_host_mak
echo "qemu_localedir=$qemu_localedir" >> $config_host_mak
echo "qemu_icondir=$qemu_icondir" >> $config_host_mak
echo "qemu_desktopdir=$qemu_desktopdir" >> $config_host_mak
-echo "libs_cpu=$libs_cpu" >> $config_host_mak
echo "libs_softmmu=$libs_softmmu" >> $config_host_mak
echo "GIT=$git" >> $config_host_mak
echo "GIT_SUBMODULES=$git_submodules" >> $config_host_mak
@@ -7731,14 +7730,7 @@ if test "$have_mlockall" = "yes" ; then
echo "HAVE_MLOCKALL=y" >> $config_host_mak
fi
if test "$fuzzing" = "yes" ; then
- if test "$have_fuzzer" = "yes"; then
- FUZZ_LDFLAGS=" -fsanitize=fuzzer"
- FUZZ_CFLAGS=" -fsanitize=fuzzer"
- QEMU_CFLAGS="$QEMU_CFLAGS -fsanitize=fuzzer-no-link"
- else
- error_exit "Your compiler doesn't support -fsanitize=fuzzer"
- exit 1
- fi
+ QEMU_CFLAGS="$QEMU_CFLAGS -fsanitize=fuzzer-no-link"
fi
if test "$plugins" = "yes" ; then
@@ -7853,8 +7845,6 @@ if test "$libudev" != "no"; then
fi
if test "$fuzzing" != "no"; then
echo "CONFIG_FUZZ=y" >> $config_host_mak
- echo "FUZZ_CFLAGS=$FUZZ_CFLAGS" >> $config_host_mak
- echo "FUZZ_LDFLAGS=$FUZZ_LDFLAGS" >> $config_host_mak
fi
if test "$edk2_blobs" = "yes" ; then
@@ -8204,9 +8194,6 @@ fi
# generate QEMU_CFLAGS/QEMU_LDFLAGS for targets
-cflags=""
-ldflags=""
-
disas_config() {
echo "CONFIG_${1}_DIS=y" >> $config_target_mak
echo "CONFIG_${1}_DIS=y" >> config-all-disas.mak
@@ -8291,24 +8278,6 @@ if test "$tcg_interpreter" = "yes" ; then
disas_config "TCI"
fi
-# Newer kernels on s390 check for an S390_PGSTE program header and
-# enable the pgste page table extensions in that case. This makes
-# the vm.allocate_pgste sysctl unnecessary. We enable this program
-# header if
-# - we build on s390x
-# - we build the system emulation for s390x (qemu-system-s390x)
-# - KVM is enabled
-# - the linker supports --s390-pgste
-if test "$TARGET_ARCH" = "s390x" && test "$target_softmmu" = "yes" && \
- test "$ARCH" = "s390x" && test "$kvm" = "yes"; then
- if ld_has --s390-pgste ; then
- ldflags="-Wl,--s390-pgste $ldflags"
- fi
-fi
-
-echo "QEMU_LDFLAGS+=$ldflags" >> $config_target_mak
-echo "QEMU_CFLAGS+=$cflags" >> $config_target_mak
-
done # for target in $targets
echo "PIXMAN_CFLAGS=$pixman_cflags" >> $config_host_mak
@@ -62,8 +62,8 @@ A more realistic scenario is verifying the installation of a guest OS:
$ ./qemu-img create raw.img 16G
$ ./qemu-img create -f qcow2 test.qcow2 16G
- $ x86_64-softmmu/qemu-system-x86_64 -cdrom debian.iso \
- -drive file=blkverify:raw.img:test.qcow2
+ $ ./qemu-system-x86_64 -cdrom debian.iso \
+ -drive file=blkverify:raw.img:test.qcow2
If the installation is aborted when blkverify detects corruption, use qemu-io
to explore the contents of the disk image at the sector in question.
@@ -819,7 +819,7 @@ the following approaches:
1) Set ``qemu_bin``, and use the given binary
2) Do not set ``qemu_bin``, and use a QEMU binary named like
- "${arch}-softmmu/qemu-system-${arch}", either in the current
+ "qemu-system-${arch}", either in the current
working directory, or in the current source tree.
The resulting ``qemu_bin`` value will be preserved in the
@@ -886,7 +886,7 @@ like the following:
.. code::
- PARAMS (key=qemu_bin, path=*, default=x86_64-softmmu/qemu-system-x86_64) => 'x86_64-softmmu/qemu-system-x86_64
+ PARAMS (key=qemu_bin, path=*, default=./qemu-system-x86_64) => './qemu-system-x86_64
arch
~~~~
@@ -129,7 +129,7 @@ To show some example invocations of command-line, we will use the
following invocation of QEMU, with a QMP server running over UNIX
socket::
- $ ./x86_64-softmmu/qemu-system-x86_64 -display none -no-user-config \
+ $ ./qemu-system-x86_64 -display none -no-user-config \
-M q35 -nodefaults -m 512 \
-blockdev node-name=node-A,driver=qcow2,file.driver=file,file.node-name=file,file.filename=./a.qcow2 \
-device virtio-blk,drive=node-A,id=virtio0 \
@@ -694,7 +694,7 @@ instance, with the following invocation. (As noted earlier, for
simplicity's sake, the destination QEMU is started on the same host, but
it could be located elsewhere)::
- $ ./x86_64-softmmu/qemu-system-x86_64 -display none -no-user-config \
+ $ ./qemu-system-x86_64 -display none -no-user-config \
-M q35 -nodefaults -m 512 \
-blockdev node-name=node-TargetDisk,driver=qcow2,file.driver=file,file.node-name=file,file.filename=./target-disk.qcow2 \
-device virtio-blk,drive=node-TargetDisk,id=virtio0 \
@@ -211,10 +211,12 @@ brlapi = not_found
if 'CONFIG_BRLAPI' in config_host
brlapi = declare_dependency(link_args: config_host['BRLAPI_LIBS'].split())
endif
+sdlwindows = false
sdl = not_found
if 'CONFIG_SDL' in config_host
sdl = declare_dependency(compile_args: config_host['SDL_CFLAGS'].split(),
link_args: config_host['SDL_LIBS'].split())
+ sdlwindows = config_host['SDL_LIBS'].contains('-mwindows')
endif
rbd = not_found
if 'CONFIG_RBD' in config_host
@@ -525,6 +527,7 @@ user_ss = ss.source_set()
bsd_user_ss = ss.source_set()
linux_user_ss = ss.source_set()
specific_ss = ss.source_set()
+specific_fuzz_ss = ss.source_set()
modules = {}
hw_arch = {}
@@ -739,6 +742,7 @@ specific_ss.add_all(when: 'CONFIG_LINUX_USER', if_true: linux_user_ss)
# needed for fuzzing binaries
subdir('tests/qtest/libqos')
+subdir('tests/qtest/fuzz')
mods = []
block_mods = []
@@ -793,6 +797,9 @@ libqmp = static_library('qmp', qmp_ss.sources(),
qmp = declare_dependency(link_whole: [libqmp])
+softmmu_ss.add(authz, block, chardev, crypto, io, qmp)
+common_ss.add(qom, qemuutil)
+
foreach m : mods
shared_module(m['dir'] + '-' + m['name'],
name_prefix: '',
@@ -801,7 +808,7 @@ foreach m : mods
install_dir: config_host['qemu_moddir'])
endforeach
-common_ss.add_all(when: 'CONFIG_SOFTMMU', if_true: softmmu_ss)
+common_ss.add_all(when: 'CONFIG_SOFTMMU', if_true: [softmmu_ss])
common_ss.add_all(when: 'CONFIG_USER_ONLY', if_true: user_ss)
common_all = common_ss.apply(config_all, strict: false)
@@ -813,11 +820,17 @@ common_all = static_library('common',
feature_to_c = find_program('scripts/feature_to_c.sh')
+emulators = []
foreach target : target_dirs
config_target = config_target_mak[target]
target_name = config_target['TARGET_NAME']
arch = config_target['TARGET_BASE_ARCH']
arch_srcs = []
+ arch_deps = []
+ c_args = ['-DNEED_CPU_H',
+ '-DCONFIG_TARGET="@0@-config-target.h"'.format(target),
+ '-DCONFIG_DEVICES="@0@-config-devices.h"'.format(target)]
+ link_args = []
target_inc = [include_directories('target' / config_target['TARGET_BASE_ARCH'])]
if host_machine.system() == 'linux'
@@ -828,12 +841,15 @@ foreach target : target_dirs
target_type='system'
t = target_softmmu_arch[arch].apply(config_target, strict: false)
arch_srcs += t.sources()
+ arch_deps += t.dependencies()
hw_dir = target_name == 'sparc64' ? 'sparc64' : arch
hw = hw_arch[hw_dir].apply(config_target, strict: false)
arch_srcs += hw.sources()
+ arch_deps += hw.dependencies()
arch_srcs += config_devices_h[target]
+ link_args += ['@block.syms', '@qemu.syms']
else
abi = config_target['TARGET_ABI_DIR']
target_type='user'
@@ -870,9 +886,11 @@ foreach target : target_dirs
t = target_arch[arch].apply(config_target, strict: false)
arch_srcs += t.sources()
+ arch_deps += t.dependencies()
target_common = common_ss.apply(config_target, strict: false)
objects = common_all.extract_objects(target_common.sources())
+ deps = target_common.dependencies()
# TODO: Change to generator once obj-y goes away
config_target_h = custom_target(target + '-config-target.h',
@@ -883,15 +901,60 @@ foreach target : target_dirs
target_specific = specific_ss.apply(config_target, strict: false)
arch_srcs += target_specific.sources()
+ arch_deps += target_specific.dependencies()
- static_library('qemu-' + target,
+ lib = static_library('qemu-' + target,
sources: arch_srcs + [config_target_h] + genh,
objects: objects,
include_directories: target_inc,
- c_args: ['-DNEED_CPU_H',
- '-DCONFIG_TARGET="@0@-config-target.h"'.format(target),
- '-DCONFIG_DEVICES="@0@-config-devices.h"'.format(target)],
+ c_args: c_args,
+ build_by_default: false,
name_suffix: 'fa')
+
+ if target.endswith('-softmmu')
+ execs = [{
+ 'name': 'qemu-system-' + target_name,
+ 'gui': false,
+ 'sources': files('softmmu/main.c'),
+ 'dependencies': []
+ }]
+ if sdlwindows
+ execs += [{
+ 'name': 'qemu-system-' + target_name + 'w',
+ 'gui': true,
+ 'sources': files('softmmu/main.c'),
+ 'dependencies': []
+ }]
+ endif
+ if config_host.has_key('CONFIG_FUZZ')
+ specific_fuzz = specific_fuzz_ss.apply(config_target, strict: false)
+ execs += [{
+ 'name': 'qemu-fuzz-' + target_name,
+ 'gui': false,
+ 'sources': specific_fuzz.sources(),
+ 'dependencies': specific_fuzz.dependencies(),
+ 'link_depends': [files('tests/qtest/fuzz/fork_fuzz.ld')],
+ }]
+ endif
+ else
+ execs = [{
+ 'name': 'qemu-' + target_name,
+ 'gui': false,
+ 'sources': [],
+ 'dependencies': []
+ }]
+ endif
+ foreach exe: execs
+ emulators += executable(exe['name'], exe['sources'],
+ install: true,
+ c_args: c_args,
+ dependencies: arch_deps + deps + exe['dependencies'],
+ objects: lib.extract_all_objects(recursive: true),
+ link_language: 'cpp',
+ link_depends: [block_syms, qemu_syms] + exe.get('link_depends', []),
+ link_args: link_args,
+ gui_app: exe['gui'])
+ endforeach
endforeach
# Other build targets
@@ -96,7 +96,7 @@ char *os_find_datadir(void)
exec_dir = qemu_get_exec_dir();
g_return_val_if_fail(exec_dir != NULL, NULL);
- dir = g_build_filename(exec_dir, "..", "pc-bios", NULL);
+ dir = g_build_filename(exec_dir, "pc-bios", NULL);
if (g_file_test(dir, G_FILE_TEST_IS_DIR)) {
return g_steal_pointer(&dir);
}
@@ -1,5 +1,13 @@
+if 'CONFIG_HAS_LD_DYNAMIC_LIST' in config_host
+ plugin_ldflags = ['-Wl,--dynamic-list=' + (meson.build_root() / 'qemu-plugins-ld.symbols')]
+elif 'CONFIG_HAS_LD_EXPORTED_SYMBOLS_LIST' in config_host
+ plugin_ldflags = ['-Wl,-exported_symbols_list,' + (meson.build_root() / 'qemu-plugins-ld64.symbols')]
+else
+ plugin_ldflags = []
+endif
+
specific_ss.add(when: 'CONFIG_PLUGIN', if_true: [files(
'loader.c',
'core.c',
'api.c',
-)])
+), declare_dependency(link_args: plugin_ldflags)])
@@ -21,7 +21,6 @@ MAKEFLAGS += -rR
%.cpp:
%.m:
%.mak:
-clean-target:
# Flags for dependency generation
QEMU_DGFLAGS += -MMD -MP -MT $@ -MF $(@D)/$(*F).d
@@ -383,7 +383,7 @@ def binariesToTest(args, testcase):
if args.qemu:
r = args.qemu
else:
- r = glob.glob('./*-softmmu/qemu-system-*')
+ r = glob.glob('./qemu-system-*')
return r
@@ -64,24 +64,26 @@ mkdir -p "$DEST_DIR/lib/" # Copy the shared libraries here
# Build once to get the list of dynamic lib paths, and copy them over
../configure --disable-werror --cc="$CC" --cxx="$CXX" --enable-fuzzing \
+ --prefix="$DEST_DIR" --bindir="$DEST_DIR" --datadir="$DEST_DIR/data/" \
--extra-cflags="$EXTRA_CFLAGS" --target-list="i386-softmmu"
-if ! make "-j$(nproc)" i386-softmmu/fuzz; then
+if ! make "-j$(nproc)" qemu-fuzz-i386; then
fatal "Build failed. Please specify a compiler with fuzzing support"\
"using the \$CC and \$CXX environemnt variables"\
"\nFor example: CC=clang CXX=clang++ $0"
fi
-for i in $(ldd ./i386-softmmu/qemu-fuzz-i386 | cut -f3 -d' '); do
+for i in $(ldd ./qemu-fuzz-i386 | cut -f3 -d' '); do
cp "$i" "$DEST_DIR/lib/"
done
-rm ./i386-softmmu/qemu-fuzz-i386
+rm qemu-fuzz-i386
# Build a second time to build the final binary with correct rpath
-../configure --bindir="$DEST_DIR" --datadir="$DEST_DIR/data/" --disable-werror \
- --cc="$CC" --cxx="$CXX" --extra-cflags="$EXTRA_CFLAGS" \
- --extra-ldflags="-Wl,-rpath,'\$\$ORIGIN/lib'"
-make "-j$(nproc)" i386-softmmu/fuzz
+../configure --disable-werror --cc="$CC" --cxx="$CXX" --enable-fuzzing \
+ --prefix="$DEST_DIR" --bindir="$DEST_DIR" --datadir="$DEST_DIR/data/" \
+ --extra-cflags="$EXTRA_CFLAGS" --extra-ldflags="-Wl,-rpath,'\$\$ORIGIN/lib'" \
+ --target-list="i386-softmmu"
+make "-j$(nproc)" qemu-fuzz-i386 V=1
# Copy over the datadir
cp -r ../pc-bios/ "$DEST_DIR/pc-bios"
@@ -90,9 +92,9 @@ cp -r ../pc-bios/ "$DEST_DIR/pc-bios"
# of available fuzz-targets. Copy over the qemu-fuzz-i386, naming it according
# to each available fuzz target (See 05509c8e6d fuzz: select fuzz target using
# executable name)
-for target in $(./i386-softmmu/qemu-fuzz-i386 | awk '$1 ~ /\*/ {print $2}');
+for target in $(./qemu-fuzz-i386 | awk '$1 ~ /\*/ {print $2}');
do
- cp ./i386-softmmu/qemu-fuzz-i386 "$DEST_DIR/qemu-fuzz-i386-target-$target"
+ cp qemu-fuzz-i386 "$DEST_DIR/qemu-fuzz-i386-target-$target"
done
echo "Done. The fuzzers are located in $DEST_DIR"
deleted file mode 100644
@@ -1,2 +0,0 @@
-softmmu-main-y = softmmu/main.o
-main.o-cflags := $(SDL_CFLAGS)
@@ -45,5 +45,18 @@ s390x_softmmu_ss.add(files(
'sigp.c',
))
+# Newer kernels on s390 check for an S390_PGSTE program header and
+# enable the pgste page table extensions in that case. This makes
+# the vm.allocate_pgste sysctl unnecessary. We enable this program
+# header if
+# - we build on s390x
+# - we build the system emulation for s390x (qemu-system-s390x)
+# - KVM is enabled
+# - the linker supports --s390-pgste
+if host_machine.cpu_family() == 's390x' and cc.has_link_argument('-Wl,--s390-pgste')
+ s390x_softmmu_ss.add(when: 'CONFIG_KVM',
+ if_true: declare_dependency(link_args: ['-Wl,--s390-pgste']))
+endif
+
target_arch += {'s390x': s390x_ss}
target_softmmu_arch += {'s390x': s390x_softmmu_ss}
@@ -457,7 +457,7 @@ build-tcg-tests-%: $(if $(CONFIG_PLUGIN),plugins)
V="$(V)" TARGET="$*" guest-tests, \
"BUILD", "TCG tests for $*")
-run-tcg-tests-%: build-tcg-tests-% %/all
+run-tcg-tests-%: build-tcg-tests-% all
$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) \
-f $(SRC_PATH)/tests/tcg/Makefile.qemu \
SRC_PATH=$(SRC_PATH) SPEED="$(SPEED)" \
@@ -485,7 +485,7 @@ QEMU_IOTESTS_HELPERS-$(call land,$(CONFIG_SOFTMMU),$(CONFIG_LINUX)) = tests/qemu
.PHONY: check-tests/check-block.sh
check-tests/check-block.sh: tests/check-block.sh qemu-img$(EXESUF) \
qemu-io$(EXESUF) qemu-nbd$(EXESUF) $(QEMU_IOTESTS_HELPERS-y) \
- $(patsubst %,%/all,$(filter %-softmmu,$(TARGET_DIRS)))
+ $(patsubst %-softmmu,qemu-system-%,$(filter %-softmmu,$(TARGET_DIRS)))
@$<
# Python venv for running tests
@@ -57,8 +57,7 @@ def pick_default_qemu_bin(arch=None):
# qemu binary path does not match arch for powerpc, handle it
if 'ppc64le' in arch:
arch = 'ppc64'
- qemu_bin_relative_path = os.path.join("%s-softmmu" % arch,
- "qemu-system-%s" % arch)
+ qemu_bin_relative_path = "./qemu-system-%s" % arch
if is_readable_executable_file(qemu_bin_relative_path):
return qemu_bin_relative_path
@@ -12,7 +12,7 @@
# This work is licensed under the terms of the GNU GPLv2.
# See the COPYING.LIB file in the top-level directory.
-qemu_bins="x86_64-softmmu/qemu-system-x86_64 aarch64-softmmu/qemu-system-aarch64"
+qemu_bins="./qemu-system-x86_64 ./qemu-system-aarch64"
if [ ! -e "tests/qtest/bios-tables-test" ]; then
echo "Test: bios-tables-test is required! Run make check before this script."
@@ -20,7 +20,7 @@
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
# THE SOFTWARE.
-QEMU=${QEMU:-"../../x86_64-softmmu/qemu-system-x86_64"}
+QEMU=${QEMU:-"../../qemu-system-x86_64"}
run_qemu() {
local kernel=$1
@@ -577,11 +577,11 @@ if [ -z "$QEMU_PROG" ]
then
if [ -x "$build_iotests/qemu" ]; then
export QEMU_PROG="$build_iotests/qemu"
- elif [ -x "$build_root/${qemu_arch}-softmmu/qemu-system-${qemu_arch}" ]; then
- export QEMU_PROG="$build_root/${qemu_arch}-softmmu/qemu-system-${qemu_arch}"
+ elif [ -x "$build_root/qemu-system-${qemu_arch}" ]; then
+ export QEMU_PROG="$build_root/qemu-system-${qemu_arch}"
else
pushd "$build_root" > /dev/null
- for binary in *-softmmu/qemu-system-*
+ for binary in qemu-system-*
do
if [ -x "$binary" ]
then
deleted file mode 100644
@@ -1,39 +0,0 @@
-QEMU_PROG_FUZZ=qemu-fuzz-$(TARGET_NAME)$(EXESUF)
-
-fuzz-obj-y += tests/qtest/libqtest.o
-fuzz-obj-y += $(libqos-obj-y)
-fuzz-obj-y += tests/qtest/fuzz/fuzz.o # Fuzzer skeleton
-fuzz-obj-y += tests/qtest/fuzz/fork_fuzz.o
-fuzz-obj-y += tests/qtest/fuzz/qos_fuzz.o
-fuzz-obj-y += tests/qtest/fuzz/qtest_wrappers.o
-
-# Targets
-fuzz-obj-$(CONFIG_PCI_I440FX) += tests/qtest/fuzz/i440fx_fuzz.o
-fuzz-obj-$(CONFIG_VIRTIO_NET) += tests/qtest/fuzz/virtio_net_fuzz.o
-fuzz-obj-$(CONFIG_SCSI) += tests/qtest/fuzz/virtio_scsi_fuzz.o
-
-FUZZ_CFLAGS += -I$(SRC_PATH)/tests -I$(SRC_PATH)/tests/qtest
-
-# Linker Script to force coverage-counters into known regions which we can mark
-# shared
-FUZZ_LDFLAGS += -Xlinker -T$(SRC_PATH)/tests/qtest/fuzz/fork_fuzz.ld
-
-FUZZ_LDFLAGS += -Wl,-wrap,qtest_inb
-FUZZ_LDFLAGS += -Wl,-wrap,qtest_inw
-FUZZ_LDFLAGS += -Wl,-wrap,qtest_inl
-FUZZ_LDFLAGS += -Wl,-wrap,qtest_outb
-FUZZ_LDFLAGS += -Wl,-wrap,qtest_outw
-FUZZ_LDFLAGS += -Wl,-wrap,qtest_outl
-FUZZ_LDFLAGS += -Wl,-wrap,qtest_readb
-FUZZ_LDFLAGS += -Wl,-wrap,qtest_readw
-FUZZ_LDFLAGS += -Wl,-wrap,qtest_readl
-FUZZ_LDFLAGS += -Wl,-wrap,qtest_readq
-FUZZ_LDFLAGS += -Wl,-wrap,qtest_writeb
-FUZZ_LDFLAGS += -Wl,-wrap,qtest_writew
-FUZZ_LDFLAGS += -Wl,-wrap,qtest_writel
-FUZZ_LDFLAGS += -Wl,-wrap,qtest_writeq
-FUZZ_LDFLAGS += -Wl,-wrap,qtest_memread
-FUZZ_LDFLAGS += -Wl,-wrap,qtest_bufread
-FUZZ_LDFLAGS += -Wl,-wrap,qtest_memwrite
-FUZZ_LDFLAGS += -Wl,-wrap,qtest_bufwrite
-FUZZ_LDFLAGS += -Wl,-wrap,qtest_memset
@@ -17,8 +17,8 @@
#include "tests/qtest/libqos/pci.h"
#include "tests/qtest/libqos/pci-pc.h"
#include "fuzz.h"
-#include "fuzz/qos_fuzz.h"
-#include "fuzz/fork_fuzz.h"
+#include "qos_fuzz.h"
+#include "fork_fuzz.h"
#define I440FX_PCI_HOST_BRIDGE_CFG 0xcf8
new file mode 100644
@@ -0,0 +1,35 @@
+specific_fuzz_ss.add(files('fuzz.c', 'fork_fuzz.c', 'qos_fuzz.c',
+ 'qtest_wrappers.c'), qos)
+
+# Targets
+specific_fuzz_ss.add(when: 'CONFIG_I440FX', if_true: files('i440fx_fuzz.c'))
+specific_fuzz_ss.add(when: 'CONFIG_VIRTIO_NET', if_true: files('virtio_net_fuzz.c'))
+specific_fuzz_ss.add(when: 'CONFIG_VIRTIO_SCSI', if_true: files('virtio_scsi_fuzz.c'))
+
+# unfortunately declare_dependency does not support link_depends, so
+# this will be duplicated in meson.build
+fork_fuzz = declare_dependency(
+ link_args: ['-fsanitize=fuzzer',
+ '-Wl,-T,' + (meson.current_source_dir() / 'fork_fuzz.ld'),
+ '-Wl,-wrap,qtest_inb',
+ '-Wl,-wrap,qtest_inw',
+ '-Wl,-wrap,qtest_inl',
+ '-Wl,-wrap,qtest_outb',
+ '-Wl,-wrap,qtest_outw',
+ '-Wl,-wrap,qtest_outl',
+ '-Wl,-wrap,qtest_readb',
+ '-Wl,-wrap,qtest_readw',
+ '-Wl,-wrap,qtest_readl',
+ '-Wl,-wrap,qtest_readq',
+ '-Wl,-wrap,qtest_writeb',
+ '-Wl,-wrap,qtest_writew',
+ '-Wl,-wrap,qtest_writel',
+ '-Wl,-wrap,qtest_writeq',
+ '-Wl,-wrap,qtest_memread',
+ '-Wl,-wrap,qtest_bufread',
+ '-Wl,-wrap,qtest_memwrite',
+ '-Wl,-wrap,qtest_bufwrite',
+ '-Wl,-wrap,qtest_memset']
+)
+
+specific_fuzz_ss.add(fork_fuzz)
@@ -12,7 +12,7 @@
*/
#include "qemu/osdep.h"
-#include "cpu.h"
+#include "hw/core/cpu.h"
#include "exec/ioport.h"
#include "fuzz.h"
@@ -61,7 +61,8 @@ static void virtio_net_fuzz_multi(QTestState *s,
* backend. Otherwise, always place the input on a virtqueue.
*/
if (vqa.rx && sockfds_initialized) {
- write(sockfds[0], Data, vqa.length);
+ int ignored = write(sockfds[0], Data, vqa.length);
+ (void) ignored;
} else {
vqa.rx = 0;
uint64_t req_addr = guest_alloc(t_alloc, vqa.length);
@@ -12,10 +12,10 @@
#include "qemu/osdep.h"
-#include "tests/qtest/libqtest.h"
-#include "libqos/virtio-scsi.h"
-#include "libqos/virtio.h"
-#include "libqos/virtio-pci.h"
+#include "tests/qtest/libqos/libqtest.h"
+#include "tests/qtest/libqos/virtio-scsi.h"
+#include "tests/qtest/libqos/virtio.h"
+#include "tests/qtest/libqos/virtio-pci.h"
#include "standard-headers/linux/virtio_ids.h"
#include "standard-headers/linux/virtio_pci.h"
#include "standard-headers/linux/virtio_scsi.h"
@@ -226,7 +226,7 @@ typedef void *(*QOSBeforeTest) (GString *cmd_line, void *arg);
* my_test <--consumed_by-- my_interface <--produces--+
*
* Assuming there the binary is
- * QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64
+ * QTEST_QEMU_BINARY=./qemu-system-x86_64
* a valid test path will be:
* "/x86_64/pc/other_node/my_driver/my_interface/my_test".
*
@@ -234,7 +234,7 @@ foreach dir : target_dirs
qtest_env = environment()
qtest_env.set('QTEST_QEMU_IMG', './qemu-img')
qtest_env.set('G_TEST_DBUS_DAEMON', meson.source_root() / 'tests/dbus-vmstate-daemon.sh')
- qtest_env.set('QTEST_QEMU_BINARY', '@0@-softmmu/qemu-system-@0@'.format(target_base))
+ qtest_env.set('QTEST_QEMU_BINARY', './qemu-system-' + target_base)
foreach test : qtests
# Executables are shared across targets, declare them only the first time we
@@ -31,7 +31,7 @@ int main(int argc, char *argv[])
g_test_init(&argc, &argv, NULL);
if (strcmp(arch, "ppc64")) {
- g_printerr("RTAS requires ppc64-softmmu/qemu-system-ppc64\n");
+ g_printerr("RTAS requires qemu-system-ppc64\n");
exit(EXIT_FAILURE);
}
qtest_add_func("rtas/get-time-of-day", test_rtas_get_time_of_day);
@@ -193,11 +193,11 @@ for target in $target_list; do
case $target in
*-linux-user | *-bsd-user)
echo "CONFIG_USER_ONLY=y" >> $config_target_mak
- echo "QEMU=\$(BUILD_DIR)/$target/qemu-$arch" >> $config_target_mak
+ echo "QEMU=\$(BUILD_DIR)/qemu-$arch" >> $config_target_mak
;;
*-softmmu)
echo "CONFIG_SOFTMMU=y" >> $config_target_mak
- echo "QEMU=\$(BUILD_DIR)/$target/qemu-system-$arch" >> $config_target_mak
+ echo "QEMU=\$(BUILD_DIR)/qemu-system-$arch" >> $config_target_mak
;;
esac