diff mbox series

[v12,1/3] misc: Add versal-usb2-ctrl-regs module

Message ID 1603369056-4168-2-git-send-email-sai.pavan.boddu@xilinx.com
State Superseded
Headers show
Series Add Versal usb model | expand

Commit Message

Sai Pavan Boddu Oct. 22, 2020, 12:17 p.m. UTC 
This module emulates control registers of versal usb2 controller, this is added
just to make guest happy. In general this module would control the phy-reset
signal from usb controller, data coherency of the transactions, signals
the host system errors received from controller.

Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
---
 hw/misc/meson.build                          |   1 +
 hw/misc/xlnx-versal-usb2-ctrl-regs.c         | 229 +++++++++++++++++++++++++++
 include/hw/misc/xlnx-versal-usb2-ctrl-regs.h |  45 ++++++
 3 files changed, 275 insertions(+)
 create mode 100644 hw/misc/xlnx-versal-usb2-ctrl-regs.c
 create mode 100644 include/hw/misc/xlnx-versal-usb2-ctrl-regs.h

Comments

Peter Maydell Oct. 26, 2020, 4:02 p.m. UTC | #1 
On Thu, 22 Oct 2020 at 13:11, Sai Pavan Boddu
<sai.pavan.boddu@xilinx.com> wrote:
>

> This module emulates control registers of versal usb2 controller, this is added

> just to make guest happy. In general this module would control the phy-reset

> signal from usb controller, data coherency of the transactions, signals

> the host system errors received from controller.

>

> Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>

> Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>

> ---

>  hw/misc/meson.build                          |   1 +

>  hw/misc/xlnx-versal-usb2-ctrl-regs.c         | 229 +++++++++++++++++++++++++++

>  include/hw/misc/xlnx-versal-usb2-ctrl-regs.h |  45 ++++++


This seems a bit odd. If it's a USB device (or part of a USB
device) then it should be under hw/usb, shouldn't it?

> +static void ir_status_postw(RegisterInfo *reg, uint64_t val64)

> +{

> +    VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(reg->opaque);

> +    /*

> +     * TODO: This should also clear USBSTS.HSE field in USB XHCI register.

> +     * May be combine both the modules.

> +     */


What does the hardware for this look like? You've modelled
it as two completely separate devices (this one and the
TYPE_USB_DWC3) but would it be closer to the hardware
structure to have a top-level device which has-a DWC3 ?

thanks
-- PMM
Sai Pavan Boddu Oct. 26, 2020, 5:28 p.m. UTC | #2 
Hi Peter,

> -----Original Message-----

> From: Peter Maydell <peter.maydell@linaro.org>

> Sent: Monday, October 26, 2020 9:33 PM

> To: Sai Pavan Boddu <saipava@xilinx.com>

> Cc: Markus Armbruster <armbru@redhat.com>; Marc-André Lureau

> <marcandre.lureau@redhat.com>; Paolo Bonzini <pbonzini@redhat.com>;

> Gerd Hoffmann <kraxel@redhat.com>; Edgar Iglesias <edgari@xilinx.com>;

> Francisco Eduardo Iglesias <figlesia@xilinx.com>; QEMU Developers <qemu-

> devel@nongnu.org>; Alistair Francis <alistair.francis@wdc.com>; Eduardo

> Habkost <ehabkost@redhat.com>; Ying Fang <fangying1@huawei.com>;

> Philippe Mathieu-Daudé <philmd@redhat.com>; Vikram Garhwal

> <fnuv@xilinx.com>; Paul Zimmerman <pauldzim@gmail.com>; Sai Pavan Boddu

> <saipava@xilinx.com>

> Subject: Re: [PATCH v12 1/3] misc: Add versal-usb2-ctrl-regs module

> 

> On Thu, 22 Oct 2020 at 13:11, Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>

> wrote:

> >

> > This module emulates control registers of versal usb2 controller, this

> > is added just to make guest happy. In general this module would

> > control the phy-reset signal from usb controller, data coherency of

> > the transactions, signals the host system errors received from controller.

> >

> > Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>

> > Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>

> > ---

> >  hw/misc/meson.build                          |   1 +

> >  hw/misc/xlnx-versal-usb2-ctrl-regs.c         | 229

> +++++++++++++++++++++++++++

> >  include/hw/misc/xlnx-versal-usb2-ctrl-regs.h |  45 ++++++

> 

> This seems a bit odd. If it's a USB device (or part of a USB

> device) then it should be under hw/usb, shouldn't it?

[Sai Pavan Boddu] This is a top level wrapper over hcd-dwc3 device, which is specific to versal soc. It's mostly dummy which controls the phy-reset and does frame length adjustments. It was added just to make guest happy, that is the reason it has been added to misc devices.
> 

> > +static void ir_status_postw(RegisterInfo *reg, uint64_t val64) {

> > +    VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(reg->opaque);

> > +    /*

> > +     * TODO: This should also clear USBSTS.HSE field in USB XHCI register.

> > +     * May be combine both the modules.

> > +     */

> 

> What does the hardware for this look like? You've modelled it as two

> completely separate devices (this one and the

> TYPE_USB_DWC3) but would it be closer to the hardware structure to have a

> top-level device which has-a DWC3 ?

[Sai Pavan Boddu] Yes, we can look at it such way. But as its specific to versal SOC, we have crafted it out and stitched them in SOC file.

Regards,
Sai Pavan
> 

> thanks

> -- PMM
Sai Pavan Boddu Oct. 28, 2020, 12:58 p.m. UTC | #3 
Hi Peter,

> -----Original Message-----

> From: Sai Pavan Boddu

> Sent: Monday, October 26, 2020 10:59 PM

> To: Peter Maydell <peter.maydell@linaro.org>

> Cc: Markus Armbruster <armbru@redhat.com>; Marc-André Lureau

> <marcandre.lureau@redhat.com>; Paolo Bonzini <pbonzini@redhat.com>;

> Gerd Hoffmann <kraxel@redhat.com>; Edgar Iglesias <edgari@xilinx.com>;

> Francisco Eduardo Iglesias <figlesia@xilinx.com>; QEMU Developers <qemu-

> devel@nongnu.org>; Alistair Francis <alistair.francis@wdc.com>; Eduardo

> Habkost <ehabkost@redhat.com>; Ying Fang <fangying1@huawei.com>;

> Philippe Mathieu-Daudé <philmd@redhat.com>; Vikram Garhwal

> <fnuv@xilinx.com>; Paul Zimmerman <pauldzim@gmail.com>

> Subject: RE: [PATCH v12 1/3] misc: Add versal-usb2-ctrl-regs module

> 

> Hi Peter,

> 

> > -----Original Message-----

> > From: Peter Maydell <peter.maydell@linaro.org>

> > Sent: Monday, October 26, 2020 9:33 PM

> > To: Sai Pavan Boddu <saipava@xilinx.com>

> > Cc: Markus Armbruster <armbru@redhat.com>; Marc-André Lureau

> > <marcandre.lureau@redhat.com>; Paolo Bonzini <pbonzini@redhat.com>;

> > Gerd Hoffmann <kraxel@redhat.com>; Edgar Iglesias <edgari@xilinx.com>;

> > Francisco Eduardo Iglesias <figlesia@xilinx.com>; QEMU Developers

> > <qemu- devel@nongnu.org>; Alistair Francis <alistair.francis@wdc.com>;

> > Eduardo Habkost <ehabkost@redhat.com>; Ying Fang

> > <fangying1@huawei.com>; Philippe Mathieu-Daudé <philmd@redhat.com>;

> > Vikram Garhwal <fnuv@xilinx.com>; Paul Zimmerman

> <pauldzim@gmail.com>;

> > Sai Pavan Boddu <saipava@xilinx.com>

> > Subject: Re: [PATCH v12 1/3] misc: Add versal-usb2-ctrl-regs module

> >

> > On Thu, 22 Oct 2020 at 13:11, Sai Pavan Boddu

> > <sai.pavan.boddu@xilinx.com>

> > wrote:

> > >

> > > This module emulates control registers of versal usb2 controller,

> > > this is added just to make guest happy. In general this module would

> > > control the phy-reset signal from usb controller, data coherency of

> > > the transactions, signals the host system errors received from controller.

> > >

> > > Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>

> > > Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>

> > > ---

> > >  hw/misc/meson.build                          |   1 +

> > >  hw/misc/xlnx-versal-usb2-ctrl-regs.c         | 229

> > +++++++++++++++++++++++++++

> > >  include/hw/misc/xlnx-versal-usb2-ctrl-regs.h |  45 ++++++

> >

> > This seems a bit odd. If it's a USB device (or part of a USB

> > device) then it should be under hw/usb, shouldn't it?

> [Sai Pavan Boddu] This is a top level wrapper over hcd-dwc3 device, which is

> specific to versal soc. It's mostly dummy which controls the phy-reset and does

> frame length adjustments. It was added just to make guest happy, that is the

> reason it has been added to misc devices.

> >

> > > +static void ir_status_postw(RegisterInfo *reg, uint64_t val64) {

> > > +    VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(reg-

> >opaque);

> > > +    /*

> > > +     * TODO: This should also clear USBSTS.HSE field in USB XHCI register.

> > > +     * May be combine both the modules.

> > > +     */

> >

> > What does the hardware for this look like? You've modelled it as two

> > completely separate devices (this one and the

> > TYPE_USB_DWC3) but would it be closer to the hardware structure to

> > have a top-level device which has-a DWC3 ?

> [Sai Pavan Boddu] Yes, we can look at it such way. But as its specific to versal

> SOC, we have crafted it out and stitched them in SOC file.

> 

> Regards,

> Sai Pavan

[Sai Pavan Boddu] I would be sending V13 without doing any changes with this patch and addressing other comments, Please review over V13.

Thanks,
Sai Pavan
> >

> > thanks

> > -- PMM
Peter Maydell Oct. 28, 2020, 1:14 p.m. UTC | #4 
On Wed, 28 Oct 2020 at 12:58, Sai Pavan Boddu <saipava@xilinx.com> wrote:
>
> Hi Peter,
>
> > -----Original Message-----
> > From: Sai Pavan Boddu
> > Sent: Monday, October 26, 2020 10:59 PM
> > To: Peter Maydell <peter.maydell@linaro.org>
> > Cc: Markus Armbruster <armbru@redhat.com>; Marc-André Lureau
> > <marcandre.lureau@redhat.com>; Paolo Bonzini <pbonzini@redhat.com>;
> > Gerd Hoffmann <kraxel@redhat.com>; Edgar Iglesias <edgari@xilinx.com>;
> > Francisco Eduardo Iglesias <figlesia@xilinx.com>; QEMU Developers <qemu-
> > devel@nongnu.org>; Alistair Francis <alistair.francis@wdc.com>; Eduardo
> > Habkost <ehabkost@redhat.com>; Ying Fang <fangying1@huawei.com>;
> > Philippe Mathieu-Daudé <philmd@redhat.com>; Vikram Garhwal
> > <fnuv@xilinx.com>; Paul Zimmerman <pauldzim@gmail.com>
> > Subject: RE: [PATCH v12 1/3] misc: Add versal-usb2-ctrl-regs module
> >
> > Hi Peter,
> >
> > > -----Original Message-----
> > > From: Peter Maydell <peter.maydell@linaro.org>
> > > Sent: Monday, October 26, 2020 9:33 PM
> > > To: Sai Pavan Boddu <saipava@xilinx.com>
> > > Cc: Markus Armbruster <armbru@redhat.com>; Marc-André Lureau
> > > <marcandre.lureau@redhat.com>; Paolo Bonzini <pbonzini@redhat.com>;
> > > Gerd Hoffmann <kraxel@redhat.com>; Edgar Iglesias <edgari@xilinx.com>;
> > > Francisco Eduardo Iglesias <figlesia@xilinx.com>; QEMU Developers
> > > <qemu- devel@nongnu.org>; Alistair Francis <alistair.francis@wdc.com>;
> > > Eduardo Habkost <ehabkost@redhat.com>; Ying Fang
> > > <fangying1@huawei.com>; Philippe Mathieu-Daudé <philmd@redhat.com>;
> > > Vikram Garhwal <fnuv@xilinx.com>; Paul Zimmerman
> > <pauldzim@gmail.com>;
> > > Sai Pavan Boddu <saipava@xilinx.com>
> > > Subject: Re: [PATCH v12 1/3] misc: Add versal-usb2-ctrl-regs module
> > >
> > > On Thu, 22 Oct 2020 at 13:11, Sai Pavan Boddu
> > > <sai.pavan.boddu@xilinx.com>
> > > wrote:
> > > >
> > > > This module emulates control registers of versal usb2 controller,
> > > > this is added just to make guest happy. In general this module would
> > > > control the phy-reset signal from usb controller, data coherency of
> > > > the transactions, signals the host system errors received from controller.
> > > >
> > > > Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
> > > > Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
> > > > ---
> > > >  hw/misc/meson.build                          |   1 +
> > > >  hw/misc/xlnx-versal-usb2-ctrl-regs.c         | 229
> > > +++++++++++++++++++++++++++
> > > >  include/hw/misc/xlnx-versal-usb2-ctrl-regs.h |  45 ++++++
> > >
> > > This seems a bit odd. If it's a USB device (or part of a USB
> > > device) then it should be under hw/usb, shouldn't it?
> > [Sai Pavan Boddu] This is a top level wrapper over hcd-dwc3 device, which is
> > specific to versal soc. It's mostly dummy which controls the phy-reset and does
> > frame length adjustments. It was added just to make guest happy, that is the
> > reason it has been added to misc devices.
> > >
> > > > +static void ir_status_postw(RegisterInfo *reg, uint64_t val64) {
> > > > +    VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(reg-
> > >opaque);
> > > > +    /*
> > > > +     * TODO: This should also clear USBSTS.HSE field in USB XHCI register.
> > > > +     * May be combine both the modules.
> > > > +     */
> > >
> > > What does the hardware for this look like? You've modelled it as two
> > > completely separate devices (this one and the
> > > TYPE_USB_DWC3) but would it be closer to the hardware structure to
> > > have a top-level device which has-a DWC3 ?
> > [Sai Pavan Boddu] Yes, we can look at it such way. But as its specific to versal
> > SOC, we have crafted it out and stitched them in SOC file.
> >
> > Regards,
> > Sai Pavan
> [Sai Pavan Boddu] I would be sending V13 without doing any changes with this patch and addressing other comments, Please review over V13.

You have my review comments above. I think the way you've structured
this isn't really the best way to do it.

thanks
-- PMM
Sai Pavan Boddu Oct. 28, 2020, 1:50 p.m. UTC | #5 
Hi Peter,

> -----Original Message-----

> From: Peter Maydell <peter.maydell@linaro.org>

> Sent: Wednesday, October 28, 2020 6:44 PM

> To: Sai Pavan Boddu <saipava@xilinx.com>

> Cc: Markus Armbruster <armbru@redhat.com>; Marc-André Lureau

> <marcandre.lureau@redhat.com>; Paolo Bonzini <pbonzini@redhat.com>;

> Gerd Hoffmann <kraxel@redhat.com>; Edgar Iglesias <edgari@xilinx.com>;

> Francisco Eduardo Iglesias <figlesia@xilinx.com>; QEMU Developers <qemu-

> devel@nongnu.org>; Alistair Francis <alistair.francis@wdc.com>; Eduardo

> Habkost <ehabkost@redhat.com>; Ying Fang <fangying1@huawei.com>;

> Philippe Mathieu-Daudé <philmd@redhat.com>; Vikram Garhwal

> <fnuv@xilinx.com>; Paul Zimmerman <pauldzim@gmail.com>

> Subject: Re: [PATCH v12 1/3] misc: Add versal-usb2-ctrl-regs module

> 

> On Wed, 28 Oct 2020 at 12:58, Sai Pavan Boddu <saipava@xilinx.com> wrote:

> >

> > Hi Peter,

> >

> > > -----Original Message-----

> > > From: Sai Pavan Boddu

> > > Sent: Monday, October 26, 2020 10:59 PM

> > > To: Peter Maydell <peter.maydell@linaro.org>

> > > Cc: Markus Armbruster <armbru@redhat.com>; Marc-André Lureau

> > > <marcandre.lureau@redhat.com>; Paolo Bonzini <pbonzini@redhat.com>;

> > > Gerd Hoffmann <kraxel@redhat.com>; Edgar Iglesias

> > > <edgari@xilinx.com>; Francisco Eduardo Iglesias

> > > <figlesia@xilinx.com>; QEMU Developers <qemu- devel@nongnu.org>;

> > > Alistair Francis <alistair.francis@wdc.com>; Eduardo Habkost

> > > <ehabkost@redhat.com>; Ying Fang <fangying1@huawei.com>; Philippe

> > > Mathieu-Daudé <philmd@redhat.com>; Vikram Garhwal

> <fnuv@xilinx.com>;

> > > Paul Zimmerman <pauldzim@gmail.com>

> > > Subject: RE: [PATCH v12 1/3] misc: Add versal-usb2-ctrl-regs module

> > >

> > > Hi Peter,

> > >

> > > > -----Original Message-----

> > > > From: Peter Maydell <peter.maydell@linaro.org>

> > > > Sent: Monday, October 26, 2020 9:33 PM

> > > > To: Sai Pavan Boddu <saipava@xilinx.com>

> > > > Cc: Markus Armbruster <armbru@redhat.com>; Marc-André Lureau

> > > > <marcandre.lureau@redhat.com>; Paolo Bonzini

> > > > <pbonzini@redhat.com>; Gerd Hoffmann <kraxel@redhat.com>; Edgar

> > > > Iglesias <edgari@xilinx.com>; Francisco Eduardo Iglesias

> > > > <figlesia@xilinx.com>; QEMU Developers

> > > > <qemu- devel@nongnu.org>; Alistair Francis

> > > > <alistair.francis@wdc.com>; Eduardo Habkost <ehabkost@redhat.com>;

> > > > Ying Fang <fangying1@huawei.com>; Philippe Mathieu-Daudé

> > > > <philmd@redhat.com>; Vikram Garhwal <fnuv@xilinx.com>; Paul

> > > > Zimmerman

> > > <pauldzim@gmail.com>;

> > > > Sai Pavan Boddu <saipava@xilinx.com>

> > > > Subject: Re: [PATCH v12 1/3] misc: Add versal-usb2-ctrl-regs

> > > > module

> > > >

> > > > On Thu, 22 Oct 2020 at 13:11, Sai Pavan Boddu

> > > > <sai.pavan.boddu@xilinx.com>

> > > > wrote:

> > > > >

> > > > > This module emulates control registers of versal usb2

> > > > > controller, this is added just to make guest happy. In general

> > > > > this module would control the phy-reset signal from usb

> > > > > controller, data coherency of the transactions, signals the host system

> errors received from controller.

> > > > >

> > > > > Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>

> > > > > Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>

> > > > > ---

> > > > >  hw/misc/meson.build                          |   1 +

> > > > >  hw/misc/xlnx-versal-usb2-ctrl-regs.c         | 229

> > > > +++++++++++++++++++++++++++

> > > > >  include/hw/misc/xlnx-versal-usb2-ctrl-regs.h |  45 ++++++

> > > >

> > > > This seems a bit odd. If it's a USB device (or part of a USB

> > > > device) then it should be under hw/usb, shouldn't it?

> > > [Sai Pavan Boddu] This is a top level wrapper over hcd-dwc3 device,

> > > which is specific to versal soc. It's mostly dummy which controls

> > > the phy-reset and does frame length adjustments. It was added just

> > > to make guest happy, that is the reason it has been added to misc devices.

> > > >

> > > > > +static void ir_status_postw(RegisterInfo *reg, uint64_t val64) {

> > > > > +    VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(reg-

> > > >opaque);

> > > > > +    /*

> > > > > +     * TODO: This should also clear USBSTS.HSE field in USB XHCI

> register.

> > > > > +     * May be combine both the modules.

> > > > > +     */

> > > >

> > > > What does the hardware for this look like? You've modelled it as

> > > > two completely separate devices (this one and the

> > > > TYPE_USB_DWC3) but would it be closer to the hardware structure to

> > > > have a top-level device which has-a DWC3 ?

> > > [Sai Pavan Boddu] Yes, we can look at it such way. But as its

> > > specific to versal SOC, we have crafted it out and stitched them in SOC file.

> > >

> > > Regards,

> > > Sai Pavan

> > [Sai Pavan Boddu] I would be sending V13 without doing any changes with

> this patch and addressing other comments, Please review over V13.

> 

> You have my review comments above. I think the way you've structured this

> isn't really the best way to do it.

[Sai Pavan Boddu] Ok, I would move this into USB folder as its related. 
But this device is not like a top level module of DWC3 model, is used for handling phy-reset signal & power management of usb port.
It's not a good idea to embedded this device into DWC3 module.

Anyway, I would attempt to create a subsystem by making dwc3 and usb2-ctrl-regs child of one device.

Regards,
Sai Pavan

> 

> thanks

> -- PMM
diff mbox series

Patch

diff --git a/hw/misc/meson.build b/hw/misc/meson.build
index 793d45b..b336dd1 100644
--- a/hw/misc/meson.build
+++ b/hw/misc/meson.build
@@ -109,3 +109,4 @@  specific_ss.add(when: 'CONFIG_MIPS_CPS', if_true: files('mips_cmgcr.c', 'mips_cp
 specific_ss.add(when: 'CONFIG_MIPS_ITU', if_true: files('mips_itu.c'))
 
 specific_ss.add(when: 'CONFIG_SBSA_REF', if_true: files('sbsa_ec.c'))
+specific_ss.add(when: 'CONFIG_XLNX_VERSAL', if_true: files('xlnx-versal-usb2-ctrl-regs.c'))
diff --git a/hw/misc/xlnx-versal-usb2-ctrl-regs.c b/hw/misc/xlnx-versal-usb2-ctrl-regs.c
new file mode 100644
index 0000000..0d09dd2
--- /dev/null
+++ b/hw/misc/xlnx-versal-usb2-ctrl-regs.c
@@ -0,0 +1,229 @@ 
+/*
+ * QEMU model of the VersalUsb2CtrlRegs Register control/Status block for
+ * USB2.0 controller
+ *
+ * This module should control phy_reset, permanent device plugs, frame length
+ * time adjust & setting of coherency paths. None of which are emulated in
+ * present model.
+ *
+ * Copyright (c) 2020 Xilinx Inc. Vikram Garhwal <fnu.vikram@xilinx.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/sysbus.h"
+#include "hw/irq.h"
+#include "hw/register.h"
+#include "qemu/bitops.h"
+#include "qemu/log.h"
+#include "qom/object.h"
+#include "migration/vmstate.h"
+#include "hw/misc/xlnx-versal-usb2-ctrl-regs.h"
+
+#ifndef XILINX_VERSAL_USB2_CTRL_REGS_ERR_DEBUG
+#define XILINX_VERSAL_USB2_CTRL_REGS_ERR_DEBUG 0
+#endif
+
+REG32(BUS_FILTER, 0x30)
+    FIELD(BUS_FILTER, BYPASS, 0, 4)
+REG32(PORT, 0x34)
+    FIELD(PORT, HOST_SMI_BAR_WR, 4, 1)
+    FIELD(PORT, HOST_SMI_PCI_CMD_REG_WR, 3, 1)
+    FIELD(PORT, HOST_MSI_ENABLE, 2, 1)
+    FIELD(PORT, PWR_CTRL_PRSNT, 1, 1)
+    FIELD(PORT, HUB_PERM_ATTACH, 0, 1)
+REG32(JITTER_ADJUST, 0x38)
+    FIELD(JITTER_ADJUST, FLADJ, 0, 6)
+REG32(BIGENDIAN, 0x40)
+    FIELD(BIGENDIAN, ENDIAN_GS, 0, 1)
+REG32(COHERENCY, 0x44)
+    FIELD(COHERENCY, USB_COHERENCY, 0, 1)
+REG32(XHC_BME, 0x48)
+    FIELD(XHC_BME, XHC_BME, 0, 1)
+REG32(REG_CTRL, 0x60)
+    FIELD(REG_CTRL, SLVERR_ENABLE, 0, 1)
+REG32(IR_STATUS, 0x64)
+    FIELD(IR_STATUS, HOST_SYS_ERR, 1, 1)
+    FIELD(IR_STATUS, ADDR_DEC_ERR, 0, 1)
+REG32(IR_MASK, 0x68)
+    FIELD(IR_MASK, HOST_SYS_ERR, 1, 1)
+    FIELD(IR_MASK, ADDR_DEC_ERR, 0, 1)
+REG32(IR_ENABLE, 0x6c)
+    FIELD(IR_ENABLE, HOST_SYS_ERR, 1, 1)
+    FIELD(IR_ENABLE, ADDR_DEC_ERR, 0, 1)
+REG32(IR_DISABLE, 0x70)
+    FIELD(IR_DISABLE, HOST_SYS_ERR, 1, 1)
+    FIELD(IR_DISABLE, ADDR_DEC_ERR, 0, 1)
+REG32(USB3, 0x78)
+
+static void ir_update_irq(VersalUsb2CtrlRegs *s)
+{
+    bool pending = s->regs[R_IR_STATUS] & ~s->regs[R_IR_MASK];
+    qemu_set_irq(s->irq_ir, pending);
+}
+
+static void ir_status_postw(RegisterInfo *reg, uint64_t val64)
+{
+    VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(reg->opaque);
+    /*
+     * TODO: This should also clear USBSTS.HSE field in USB XHCI register.
+     * May be combine both the modules.
+     */
+    ir_update_irq(s);
+}
+
+static uint64_t ir_enable_prew(RegisterInfo *reg, uint64_t val64)
+{
+    VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(reg->opaque);
+    uint32_t val = val64;
+
+    s->regs[R_IR_MASK] &= ~val;
+    ir_update_irq(s);
+    return 0;
+}
+
+static uint64_t ir_disable_prew(RegisterInfo *reg, uint64_t val64)
+{
+    VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(reg->opaque);
+    uint32_t val = val64;
+
+    s->regs[R_IR_MASK] |= val;
+    ir_update_irq(s);
+    return 0;
+}
+
+static const RegisterAccessInfo usb2_ctrl_regs_regs_info[] = {
+    {   .name = "BUS_FILTER",  .addr = A_BUS_FILTER,
+        .rsvd = 0xfffffff0,
+    },{ .name = "PORT",  .addr = A_PORT,
+        .rsvd = 0xffffffe0,
+    },{ .name = "JITTER_ADJUST",  .addr = A_JITTER_ADJUST,
+        .reset = 0x20,
+        .rsvd = 0xffffffc0,
+    },{ .name = "BIGENDIAN",  .addr = A_BIGENDIAN,
+        .rsvd = 0xfffffffe,
+    },{ .name = "COHERENCY",  .addr = A_COHERENCY,
+        .rsvd = 0xfffffffe,
+    },{ .name = "XHC_BME",  .addr = A_XHC_BME,
+        .reset = 0x1,
+        .rsvd = 0xfffffffe,
+    },{ .name = "REG_CTRL",  .addr = A_REG_CTRL,
+        .rsvd = 0xfffffffe,
+    },{ .name = "IR_STATUS",  .addr = A_IR_STATUS,
+        .rsvd = 0xfffffffc,
+        .w1c = 0x3,
+        .post_write = ir_status_postw,
+    },{ .name = "IR_MASK",  .addr = A_IR_MASK,
+        .reset = 0x3,
+        .rsvd = 0xfffffffc,
+        .ro = 0x3,
+    },{ .name = "IR_ENABLE",  .addr = A_IR_ENABLE,
+        .rsvd = 0xfffffffc,
+        .pre_write = ir_enable_prew,
+    },{ .name = "IR_DISABLE",  .addr = A_IR_DISABLE,
+        .rsvd = 0xfffffffc,
+        .pre_write = ir_disable_prew,
+    },{ .name = "USB3",  .addr = A_USB3,
+    }
+};
+
+static void usb2_ctrl_regs_reset_init(Object *obj, ResetType type)
+{
+    VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(obj);
+    unsigned int i;
+
+    for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) {
+        register_reset(&s->regs_info[i]);
+    }
+}
+
+static void usb2_ctrl_regs_reset_hold(Object *obj)
+{
+    VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(obj);
+
+    ir_update_irq(s);
+}
+
+static const MemoryRegionOps usb2_ctrl_regs_ops = {
+    .read = register_read_memory,
+    .write = register_write_memory,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid = {
+        .min_access_size = 4,
+        .max_access_size = 4,
+    },
+};
+
+static void usb2_ctrl_regs_init(Object *obj)
+{
+    VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(obj);
+    SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
+    RegisterInfoArray *reg_array;
+
+    memory_region_init(&s->iomem, obj, TYPE_XILINX_VERSAL_USB2_CTRL_REGS,
+                       USB2_REGS_R_MAX * 4);
+    reg_array =
+        register_init_block32(DEVICE(obj), usb2_ctrl_regs_regs_info,
+                              ARRAY_SIZE(usb2_ctrl_regs_regs_info),
+                              s->regs_info, s->regs,
+                              &usb2_ctrl_regs_ops,
+                              XILINX_VERSAL_USB2_CTRL_REGS_ERR_DEBUG,
+                              USB2_REGS_R_MAX * 4);
+    memory_region_add_subregion(&s->iomem,
+                                0x0,
+                                &reg_array->mem);
+    sysbus_init_mmio(sbd, &s->iomem);
+    sysbus_init_irq(sbd, &s->irq_ir);
+}
+
+static const VMStateDescription vmstate_usb2_ctrl_regs = {
+    .name = TYPE_XILINX_VERSAL_USB2_CTRL_REGS,
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32_ARRAY(regs, VersalUsb2CtrlRegs, USB2_REGS_R_MAX),
+        VMSTATE_END_OF_LIST(),
+    }
+};
+
+static void usb2_ctrl_regs_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    ResettableClass *rc = RESETTABLE_CLASS(klass);
+
+    rc->phases.enter = usb2_ctrl_regs_reset_init;
+    rc->phases.hold  = usb2_ctrl_regs_reset_hold;
+    dc->vmsd = &vmstate_usb2_ctrl_regs;
+}
+
+static const TypeInfo usb2_ctrl_regs_info = {
+    .name          = TYPE_XILINX_VERSAL_USB2_CTRL_REGS,
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(VersalUsb2CtrlRegs),
+    .class_init    = usb2_ctrl_regs_class_init,
+    .instance_init = usb2_ctrl_regs_init,
+};
+
+static void usb2_ctrl_regs_register_types(void)
+{
+    type_register_static(&usb2_ctrl_regs_info);
+}
+
+type_init(usb2_ctrl_regs_register_types)
diff --git a/include/hw/misc/xlnx-versal-usb2-ctrl-regs.h b/include/hw/misc/xlnx-versal-usb2-ctrl-regs.h
new file mode 100644
index 0000000..975a717
--- /dev/null
+++ b/include/hw/misc/xlnx-versal-usb2-ctrl-regs.h
@@ -0,0 +1,45 @@ 
+/*
+ * QEMU model of the VersalUsb2CtrlRegs Register control/Status block for
+ * USB2.0 controller
+ *
+ * Copyright (c) 2020 Xilinx Inc. Vikram Garhwal <fnu.vikram@xilinx.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef _XLNX_USB2_REGS_H_
+#define _XLNX_USB2_REGS_H_
+
+#define TYPE_XILINX_VERSAL_USB2_CTRL_REGS "xlnx.versal-usb2-ctrl-regs"
+
+#define XILINX_VERSAL_USB2_CTRL_REGS(obj) \
+     OBJECT_CHECK(VersalUsb2CtrlRegs, (obj), TYPE_XILINX_VERSAL_USB2_CTRL_REGS)
+
+#define USB2_REGS_R_MAX ((0x78 / 4) + 1)
+
+typedef struct VersalUsb2CtrlRegs {
+    SysBusDevice parent_obj;
+    MemoryRegion iomem;
+    qemu_irq irq_ir;
+
+    uint32_t regs[USB2_REGS_R_MAX];
+    RegisterInfo regs_info[USB2_REGS_R_MAX];
+} VersalUsb2CtrlRegs;
+
+#endif