diff mbox series

[V9,6/6] hw/mips: Add Loongson-3 machine support

Message ID 1600222344-16808-7-git-send-email-chenhc@lemote.com
State Superseded
Headers show
Series mips: Add Loongson-3 machine support | expand

Commit Message

chen huacai Sept. 16, 2020, 2:12 a.m. UTC
Add Loongson-3 based machine support, it use liointc as the interrupt
controler and use GPEX as the pci controller. Currently it can work with
both TCG and KVM.

As the machine model is not based on any exiting physical hardware, the
name of the machine is "loongson3-virt". It may be superseded in future
by a real machine model. If this happens, then a regular deprecation
procedure shall occur for "loongson3-virt" machine.

We now already have a full functional Linux kernel (based on Linux-5.4.x
LTS, the kvm host side and guest side have both been upstream for Linux-
5.9, but Linux-5.9 has not been released yet) here:

https://github.com/chenhuacai/linux

Of course the upstream kernel is also usable (though it is "unstable"
now):

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git

How to use QEMU/Loongson-3?
1, Download kernel source from the above URL;
2, Build a kernel with arch/mips/configs/loongson3_defconfig;
3, Boot a Loongson-3A4000 host with this kernel (for KVM mode);
4, Build QEMU-master with this patchset;
5, modprobe kvm (only necessary for KVM mode);
6, Use QEMU with TCG:
       qemu-system-mips64el -M loongson3-virt,accel=tcg -cpu Loongson-3A1000 -kernel <path_to_kernel> -append ...
   Use QEMU with KVM:
       qemu-system-mips64el -M loongson3-virt,accel=kvm -cpu Loongson-3A4000 -kernel <path_to_kernel> -append ...

   The "-cpu" parameter is optional here and QEMU will use the correct type for TCG/KVM automatically.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
---
 default-configs/mips64el-softmmu.mak |   1 +
 hw/mips/Kconfig                      |  11 +
 hw/mips/fw_cfg.c                     |  35 ++
 hw/mips/fw_cfg.h                     |  19 +
 hw/mips/loongson3_virt.c             | 956 +++++++++++++++++++++++++++++++++++
 hw/mips/meson.build                  |   3 +-
 6 files changed, 1024 insertions(+), 1 deletion(-)
 create mode 100644 hw/mips/fw_cfg.c
 create mode 100644 hw/mips/fw_cfg.h
 create mode 100644 hw/mips/loongson3_virt.c

Comments

Philippe Mathieu-Daudé Sept. 16, 2020, 7:56 a.m. UTC | #1
Hi Huacai,

On 9/16/20 4:12 AM, Huacai Chen wrote:
> Add Loongson-3 based machine support, it use liointc as the interrupt
> controler and use GPEX as the pci controller. Currently it can work with
> both TCG and KVM.
> 
> As the machine model is not based on any exiting physical hardware, the
> name of the machine is "loongson3-virt". It may be superseded in future
> by a real machine model. If this happens, then a regular deprecation
> procedure shall occur for "loongson3-virt" machine.

Alternatively you can name it loongson3-virt-5.2 from start.

> 
> We now already have a full functional Linux kernel (based on Linux-5.4.x
> LTS, the kvm host side and guest side have both been upstream for Linux-
> 5.9, but Linux-5.9 has not been released yet) here:
> 
> https://github.com/chenhuacai/linux
> 
> Of course the upstream kernel is also usable (though it is "unstable"
> now):
> 
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
> 
> How to use QEMU/Loongson-3?
> 1, Download kernel source from the above URL;
> 2, Build a kernel with arch/mips/configs/loongson3_defconfig;
> 3, Boot a Loongson-3A4000 host with this kernel (for KVM mode);
> 4, Build QEMU-master with this patchset;

Which produces all the following errors:

hw/mips/loongson3_virt.c: In function 'get_cpu_freq':
hw/mips/loongson3_virt.c:372:12: error: variable 'freq_reg' has
initializer but incomplete type
     struct kvm_one_reg freq_reg = {
            ^
hw/mips/loongson3_virt.c:373:9: error: unknown field 'id' specified in
initializer
         .id = KVM_REG_MIPS_COUNT_HZ,
         ^
hw/mips/loongson3_virt.c:373:15: error: 'KVM_REG_MIPS_COUNT_HZ'
undeclared (first use in this function)
         .id = KVM_REG_MIPS_COUNT_HZ,
               ^
hw/mips/loongson3_virt.c:373:15: note: each undeclared identifier is
reported only once for each function it appears in
hw/mips/loongson3_virt.c:373:15: error: excess elements in struct
initializer [-Werror]
hw/mips/loongson3_virt.c:373:15: note: (near initialization for 'freq_reg')
hw/mips/loongson3_virt.c:374:9: error: unknown field 'addr' specified in
initializer
         .addr = (uintptr_t)(&freq)
         ^
hw/mips/loongson3_virt.c:374:17: error: excess elements in struct
initializer [-Werror]
         .addr = (uintptr_t)(&freq)
                 ^
hw/mips/loongson3_virt.c:374:17: note: (near initialization for 'freq_reg')
hw/mips/loongson3_virt.c:372:24: error: storage size of 'freq_reg' isn't
known
     struct kvm_one_reg freq_reg = {
                        ^
hw/mips/loongson3_virt.c:380:41: error: 'KVM_GET_ONE_REG' undeclared
(first use in this function)
         ret = kvm_vcpu_ioctl(first_cpu, KVM_GET_ONE_REG, &freq_reg);
                                         ^
hw/mips/loongson3_virt.c:372:24: error: unused variable 'freq_reg'
[-Werror=unused-variable]
     struct kvm_one_reg freq_reg = {
                        ^
hw/mips/loongson3_virt.c: In function 'init_loongson_params':
hw/mips/loongson3_virt.c:467:25: error: cast from pointer to integer of
different size [-Werror=pointer-to-int-cast]
     lp->memory_offset = (unsigned long long)init_memory_map(p)
                         ^
hw/mips/loongson3_virt.c:468:27: error: cast from pointer to integer of
different size [-Werror=pointer-to-int-cast]
                         - (unsigned long long)lp;
                           ^
hw/mips/loongson3_virt.c:471:22: error: cast from pointer to integer of
different size [-Werror=pointer-to-int-cast]
     lp->cpu_offset = (unsigned long long)init_cpu_info(p)
                      ^
hw/mips/loongson3_virt.c:472:24: error: cast from pointer to integer of
different size [-Werror=pointer-to-int-cast]
                      - (unsigned long long)lp;
                        ^
hw/mips/loongson3_virt.c:475:25: error: cast from pointer to integer of
different size [-Werror=pointer-to-int-cast]
     lp->system_offset = (unsigned long long)init_system_loongson(p)
                         ^
hw/mips/loongson3_virt.c:476:27: error: cast from pointer to integer of
different size [-Werror=pointer-to-int-cast]
                         - (unsigned long long)lp;
                           ^
hw/mips/loongson3_virt.c:479:22: error: cast from pointer to integer of
different size [-Werror=pointer-to-int-cast]
     lp->irq_offset = (unsigned long long)init_irq_source(p)
                      ^
hw/mips/loongson3_virt.c:480:24: error: cast from pointer to integer of
different size [-Werror=pointer-to-int-cast]
                      - (unsigned long long)lp;
                        ^
hw/mips/loongson3_virt.c:483:28: error: cast from pointer to integer of
different size [-Werror=pointer-to-int-cast]
     lp->interface_offset = (unsigned long long)init_interface_info(p)
                            ^
hw/mips/loongson3_virt.c:484:30: error: cast from pointer to integer of
different size [-Werror=pointer-to-int-cast]
                            - (unsigned long long)lp;
                              ^
hw/mips/loongson3_virt.c:487:33: error: cast from pointer to integer of
different size [-Werror=pointer-to-int-cast]
     lp->boarddev_table_offset = (unsigned long long)board_devices_info(p)
                                 ^
hw/mips/loongson3_virt.c:488:35: error: cast from pointer to integer of
different size [-Werror=pointer-to-int-cast]
                                 - (unsigned long long)lp;
                                   ^
hw/mips/loongson3_virt.c:491:26: error: cast from pointer to integer of
different size [-Werror=pointer-to-int-cast]
     lp->special_offset = (unsigned long long)init_special_info(p)
                          ^
hw/mips/loongson3_virt.c:492:28: error: cast from pointer to integer of
different size [-Werror=pointer-to-int-cast]
                          - (unsigned long long)lp;
                            ^
hw/mips/loongson3_virt.c: In function 'set_prom_cmdline':
hw/mips/loongson3_virt.c:652:21: error: format '%ld' expects argument of
type 'long int', but argument 3 has type 'uint64_t {aka long long
unsigned int}' [-Werror=format=]
     sprintf(memenv, "%ld", loaderparams.ram_size > 0x10000000
                     ^
hw/mips/loongson3_virt.c:654:25: error: format '%ld' expects argument of
type 'long int', but argument 3 has type 'uint64_t {aka long long
unsigned int}' [-Werror=format=]
     sprintf(highmemenv, "%ld", loaderparams.ram_size > 0x10000000
                         ^
cc1: all warnings being treated as errors
Makefile.ninja:2459: recipe for target
'libqemu-mips64el-softmmu.fa.p/hw_mips_loongson3_virt.c.obj' failed
make: *** [libqemu-mips64el-softmmu.fa.p/hw_mips_loongson3_virt.c.obj]
Error 1

Anyway I'll keep reviewing this patch.

> 5, modprobe kvm (only necessary for KVM mode);
> 6, Use QEMU with TCG:
>        qemu-system-mips64el -M loongson3-virt,accel=tcg -cpu Loongson-3A1000 -kernel <path_to_kernel> -append ...
>    Use QEMU with KVM:
>        qemu-system-mips64el -M loongson3-virt,accel=kvm -cpu Loongson-3A4000 -kernel <path_to_kernel> -append ...
> 
>    The "-cpu" parameter is optional here and QEMU will use the correct type for TCG/KVM automatically.
> 
> Signed-off-by: Huacai Chen <chenhc@lemote.com>
> Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
> ---
>  default-configs/mips64el-softmmu.mak |   1 +
>  hw/mips/Kconfig                      |  11 +
>  hw/mips/fw_cfg.c                     |  35 ++
>  hw/mips/fw_cfg.h                     |  19 +
>  hw/mips/loongson3_virt.c             | 956 +++++++++++++++++++++++++++++++++++
>  hw/mips/meson.build                  |   3 +-
>  6 files changed, 1024 insertions(+), 1 deletion(-)
>  create mode 100644 hw/mips/fw_cfg.c
>  create mode 100644 hw/mips/fw_cfg.h
>  create mode 100644 hw/mips/loongson3_virt.c
> 
> diff --git a/default-configs/mips64el-softmmu.mak b/default-configs/mips64el-softmmu.mak
> index 9f8a3ef..26c660a 100644
> --- a/default-configs/mips64el-softmmu.mak
> +++ b/default-configs/mips64el-softmmu.mak
> @@ -3,6 +3,7 @@
>  include mips-softmmu-common.mak
>  CONFIG_IDE_VIA=y
>  CONFIG_FULOONG=y
> +CONFIG_LOONGSON3V=y
>  CONFIG_ATI_VGA=y
>  CONFIG_RTL8139_PCI=y
>  CONFIG_JAZZ=y
> diff --git a/hw/mips/Kconfig b/hw/mips/Kconfig
> index 67d39c5..cc5609b 100644
> --- a/hw/mips/Kconfig
> +++ b/hw/mips/Kconfig
> @@ -45,6 +45,17 @@ config FULOONG
>      bool
>      select PCI_BONITO
>  
> +config LOONGSON3V
> +    bool
> +    select PCKBD
> +    select SERIAL
> +    select GOLDFISH_RTC
> +    select LOONGSON_LIOINTC
> +    select PCI_EXPRESS_GENERIC_BRIDGE
> +    select VIRTIO_VGA
> +    select QXL if SPICE
> +    select MSI_NONBROKEN
> +
>  config MIPS_CPS
>      bool
>      select PTIMER
> diff --git a/hw/mips/fw_cfg.c b/hw/mips/fw_cfg.c
> new file mode 100644
> index 0000000..67c4a74
> --- /dev/null
> +++ b/hw/mips/fw_cfg.c
> @@ -0,0 +1,35 @@
> +/*
> + * QEMU fw_cfg helpers (MIPS specific)
> + *
> + * Copyright (c) 2020 Lemote, Inc.
> + *
> + * Author:
> + *   Huacai Chen (chenhc@lemote.com)
> + *
> + * SPDX-License-Identifier: GPL-2.0-or-later
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
> + * See the COPYING file in the top-level directory.
> + */
> +
> +#include "qemu/osdep.h"
> +#include "hw/mips/fw_cfg.h"
> +#include "hw/nvram/fw_cfg.h"
> +
> +const char *fw_cfg_arch_key_name(uint16_t key)
> +{
> +    static const struct {
> +        uint16_t key;
> +        const char *name;
> +    } fw_cfg_arch_wellknown_keys[] = {
> +        {FW_CFG_MACHINE_VERSION, "machine_version"},
> +        {FW_CFG_CPU_FREQ, "cpu_frequency"},
> +    };
> +
> +    for (size_t i = 0; i < ARRAY_SIZE(fw_cfg_arch_wellknown_keys); i++) {
> +        if (fw_cfg_arch_wellknown_keys[i].key == key) {
> +            return fw_cfg_arch_wellknown_keys[i].name;
> +        }
> +    }
> +    return NULL;
> +}
> diff --git a/hw/mips/fw_cfg.h b/hw/mips/fw_cfg.h
> new file mode 100644
> index 0000000..e317d5b
> --- /dev/null
> +++ b/hw/mips/fw_cfg.h
> @@ -0,0 +1,19 @@
> +/*
> + * QEMU fw_cfg helpers (MIPS specific)
> + *
> + * Copyright (c) 2020 Huacai Chen
> + *
> + * SPDX-License-Identifier: MIT
> + */
> +
> +#ifndef HW_MIPS_FW_CFG_H
> +#define HW_MIPS_FW_CFG_H
> +
> +#include "hw/boards.h"
> +#include "hw/nvram/fw_cfg.h"
> +
> +/* Data for BIOS to identify machine */
> +#define FW_CFG_MACHINE_VERSION  (FW_CFG_ARCH_LOCAL + 0)
> +#define FW_CFG_CPU_FREQ         (FW_CFG_ARCH_LOCAL + 1)
> +
> +#endif

Please keep the fw_cfg changes in a separate patch.

> diff --git a/hw/mips/loongson3_virt.c b/hw/mips/loongson3_virt.c
> new file mode 100644
> index 0000000..14d3024
> --- /dev/null
> +++ b/hw/mips/loongson3_virt.c
> @@ -0,0 +1,956 @@
> +/*
> + * Generic Loongson-3 Platform support
> + *
> + * Copyright (c) 2017-2020 Huacai Chen (chenhc@lemote.com)
> + * Copyright (c) 2017-2020 Jiaxun Yang <jiaxun.yang@flygoat.com>
> + *
> + * This program is free software: you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation, either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <https://www.gnu.org/licenses/>.
> + */
> +
> +/*
> + * Generic virtualized PC Platform based on Loongson-3 CPU (MIPS64R2 with
> + * extensions, 800~2000MHz)
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qemu-common.h"
> +#include "qemu/units.h"
> +#include "qapi/error.h"
> +#include "cpu.h"
> +#include "elf.h"
> +#include "kvm_mips.h"
> +#include "hw/boards.h"
> +#include "hw/char/serial.h"
> +#include "hw/mips/mips.h"
> +#include "hw/mips/cpudevs.h"
> +#include "hw/mips/fw_cfg.h"
> +#include "hw/misc/empty_slot.h"
> +#include "hw/intc/i8259.h"
> +#include "hw/loader.h"
> +#include "hw/isa/superio.h"
> +#include "hw/pci/msi.h"
> +#include "hw/pci/pci.h"
> +#include "hw/pci/pci_host.h"
> +#include "hw/pci-host/gpex.h"
> +#include "hw/rtc/mc146818rtc.h"
> +#include "hw/usb.h"
> +#include "net/net.h"
> +#include "exec/address-spaces.h"
> +#include "sysemu/kvm.h"
> +#include "sysemu/qtest.h"
> +#include "sysemu/reset.h"
> +#include "sysemu/runstate.h"
> +#include "qemu/log.h"
> +#include "qemu/error-report.h"
> +
> +#define PM_CNTL_MODE          0x10
> +
> +/* Overall MMIO & Memory layout */
> +enum {
> +    VIRT_LOWMEM,
> +    VIRT_PM,
> +    VIRT_FW_CFG,
> +    VIRT_RTC,
> +    VIRT_PCIE_PIO,
> +    VIRT_PCIE_ECAM,
> +    VIRT_BIOS_ROM,
> +    VIRT_UART,
> +    VIRT_LIOINTC,
> +    VIRT_PCIE_MMIO,
> +    VIRT_HIGHMEM
> +};
> +
> +/* Low MEM layout for QEMU kernel loader */
> +enum {
> +    LOADER_KERNEL,
> +    LOADER_INITRD,
> +    LOADER_CMDLINE
> +};
> +
> +/* BIOS ROM layout for QEMU kernel loader */
> +enum {
> +    LOADER_BOOTROM,
> +    LOADER_PARAM,
> +};
> +
> +struct MemmapEntry {
> +    hwaddr base;
> +    hwaddr size;
> +};
> +
> +/*
> + * LEFI (a UEFI-like interface for BIOS-Kernel boot parameters) data structrues
> + * defined at arch/mips/include/asm/mach-loongson64/boot_param.h in Linux kernel
> + */
> +struct efi_memory_map_loongson {
> +    uint16_t vers;               /* version of efi_memory_map */
> +    uint32_t nr_map;             /* number of memory_maps */
> +    uint32_t mem_freq;           /* memory frequence */
> +    struct mem_map {
> +        uint32_t node_id;        /* node_id which memory attached to */
> +        uint32_t mem_type;       /* system memory, pci memory, pci io, etc. */
> +        uint64_t mem_start;      /* memory map start address */
> +        uint32_t mem_size;       /* each memory_map size, not the total size */
> +    } map[128];
> +} __attribute__((packed));

QEMU_PACKED

> +
> +enum loongson_cpu_type {
> +    Legacy_2E = 0x0,
> +    Legacy_2F = 0x1,
> +    Legacy_3A = 0x2,
> +    Legacy_3B = 0x3,
> +    Legacy_1A = 0x4,
> +    Legacy_1B = 0x5,
> +    Legacy_2G = 0x6,
> +    Legacy_2H = 0x7,
> +    Loongson_1A = 0x100,
> +    Loongson_1B = 0x101,
> +    Loongson_2E = 0x200,
> +    Loongson_2F = 0x201,
> +    Loongson_2G = 0x202,
> +    Loongson_2H = 0x203,
> +    Loongson_3A = 0x300,
> +    Loongson_3B = 0x301
> +};
> +
> +/*
> + * Capability and feature descriptor structure for MIPS CPU
> + */
> +struct efi_cpuinfo_loongson {
> +    uint16_t vers;               /* version of efi_cpuinfo_loongson */
> +    uint32_t processor_id;       /* PRID, e.g. 6305, 6306 */
> +    uint32_t cputype;            /* Loongson_3A/3B, etc. */
> +    uint32_t total_node;         /* num of total numa nodes */
> +    uint16_t cpu_startup_core_id;   /* Boot core id */
> +    uint16_t reserved_cores_mask;
> +    uint32_t cpu_clock_freq;     /* cpu_clock */
> +    uint32_t nr_cpus;
> +    char cpuname[64];
> +} __attribute__((packed));
> +
> +#define MAX_UARTS 64
> +struct uart_device {
> +    uint32_t iotype;
> +    uint32_t uartclk;
> +    uint32_t int_offset;
> +    uint64_t uart_base;
> +} __attribute__((packed));
> +
> +#define MAX_SENSORS 64
> +#define SENSOR_TEMPER  0x00000001
> +#define SENSOR_VOLTAGE 0x00000002
> +#define SENSOR_FAN     0x00000004
> +struct sensor_device {
> +    char name[32];  /* a formal name */
> +    char label[64]; /* a flexible description */
> +    uint32_t type;       /* SENSOR_* */
> +    uint32_t id;         /* instance id of a sensor-class */
> +    uint32_t fan_policy; /* step speed or constant speed */
> +    uint32_t fan_percent;/* only for constant speed policy */
> +    uint64_t base_addr;  /* base address of device registers */
> +} __attribute__((packed));
> +
> +struct system_loongson {
> +    uint16_t vers;               /* version of system_loongson */
> +    uint32_t ccnuma_smp;         /* 0: no numa; 1: has numa */
> +    uint32_t sing_double_channel;/* 1: single; 2: double */
> +    uint32_t nr_uarts;
> +    struct uart_device uarts[MAX_UARTS];
> +    uint32_t nr_sensors;
> +    struct sensor_device sensors[MAX_SENSORS];
> +    char has_ec;
> +    char ec_name[32];
> +    uint64_t ec_base_addr;
> +    char has_tcm;
> +    char tcm_name[32];
> +    uint64_t tcm_base_addr;
> +    uint64_t workarounds;
> +    uint64_t of_dtb_addr; /* NULL if not support */
> +} __attribute__((packed));
> +
> +struct irq_source_routing_table {
> +    uint16_t vers;
> +    uint16_t size;
> +    uint16_t rtr_bus;
> +    uint16_t rtr_devfn;
> +    uint32_t vendor;
> +    uint32_t device;
> +    uint32_t PIC_type;           /* conform use HT or PCI to route to CPU-PIC */
> +    uint64_t ht_int_bit;         /* 3A: 1<<24; 3B: 1<<16 */
> +    uint64_t ht_enable;          /* irqs used in this PIC */
> +    uint32_t node_id;            /* node id: 0x0-0; 0x1-1; 0x10-2; 0x11-3 */
> +    uint64_t pci_mem_start_addr;
> +    uint64_t pci_mem_end_addr;
> +    uint64_t pci_io_start_addr;
> +    uint64_t pci_io_end_addr;
> +    uint64_t pci_config_addr;
> +    uint16_t dma_mask_bits;
> +    uint16_t dma_noncoherent;
> +} __attribute__((packed));
> +
> +struct interface_info {
> +    uint16_t vers;               /* version of the specificition */
> +    uint16_t size;
> +    uint8_t  flag;
> +    char description[64];
> +} __attribute__((packed));
> +
> +#define MAX_RESOURCE_NUMBER 128
> +struct resource_loongson {
> +    uint64_t start;              /* resource start address */
> +    uint64_t end;                /* resource end address */
> +    char name[64];
> +    uint32_t flags;
> +};
> +
> +struct archdev_data {};          /* arch specific additions */
> +
> +struct board_devices {
> +    char name[64];               /* hold the device name */
> +    uint32_t num_resources;      /* number of device_resource */
> +    /* for each device's resource */
> +    struct resource_loongson resource[MAX_RESOURCE_NUMBER];
> +    /* arch specific additions */
> +    struct archdev_data archdata;
> +};
> +
> +struct loongson_special_attribute {
> +    uint16_t vers;               /* version of this special */
> +    char special_name[64];       /* special_atribute_name */
> +    uint32_t loongson_special_type; /* type of special device */
> +    /* for each device's resource */
> +    struct resource_loongson resource[MAX_RESOURCE_NUMBER];
> +};
> +
> +struct loongson_params {
> +    uint64_t memory_offset;      /* efi_memory_map_loongson struct offset */
> +    uint64_t cpu_offset;         /* efi_cpuinfo_loongson struct offset */
> +    uint64_t system_offset;      /* system_loongson struct offset */
> +    uint64_t irq_offset;         /* irq_source_routing_table struct offset */
> +    uint64_t interface_offset;   /* interface_info struct offset */
> +    uint64_t special_offset;     /* loongson_special_attribute struct offset */
> +    uint64_t boarddev_table_offset;  /* board_devices offset */
> +};
> +
> +struct smbios_tables {
> +    uint16_t vers;               /* version of smbios */
> +    uint64_t vga_bios;           /* vga_bios address */
> +    struct loongson_params lp;
> +};
> +
> +struct efi_reset_system_t {
> +    uint64_t ResetCold;
> +    uint64_t ResetWarm;
> +    uint64_t ResetType;
> +    uint64_t Shutdown;
> +    uint64_t DoSuspend; /* NULL if not support */
> +};
> +
> +struct efi_loongson {
> +    uint64_t mps;                /* MPS table */
> +    uint64_t acpi;               /* ACPI table (IA64 ext 0.71) */
> +    uint64_t acpi20;             /* ACPI table (ACPI 2.0) */
> +    struct smbios_tables smbios; /* SM BIOS table */
> +    uint64_t sal_systab;         /* SAL system table */
> +    uint64_t boot_info;          /* boot info table */
> +};

What about moving most of this declarations in a "loongson_efi.h"
local header?

> +
> +struct boot_params {
> +    struct efi_loongson efi;
> +    struct efi_reset_system_t reset_system;
> +};
> +
> +#define LOONGSON_MAX_VCPUS      16
> +
> +#define LOONGSON3_BIOSNAME "bios_loongson3.bin"
> +
> +#define UART_IRQ            0
> +#define RTC_IRQ             1
> +#define PCIE_IRQ_BASE       2
> +
> +#define align(x) (((x) + 63) & ~63)
> +
> +static const struct MemmapEntry virt_memmap[] = {
> +    [VIRT_LOWMEM] =      { 0x00000000,    0x10000000 },
> +    [VIRT_PM] =          { 0x10080000,         0x100 },
> +    [VIRT_FW_CFG] =      { 0x10080100,         0x100 },
> +    [VIRT_RTC] =         { 0x10081000,        0x1000 },
> +    [VIRT_PCIE_PIO] =    { 0x18000000,       0x80000 },
> +    [VIRT_PCIE_ECAM] =   { 0x1a000000,     0x2000000 },
> +    [VIRT_BIOS_ROM] =    { 0x1fc00000,      0x200000 },
> +    [VIRT_UART] =        { 0x1fe001e0,           0x8 },
> +    [VIRT_LIOINTC] =     { 0x3ff01400,          0x64 },
> +    [VIRT_PCIE_MMIO] =   { 0x40000000,    0x40000000 },
> +    [VIRT_HIGHMEM] =     { 0x80000000,           0x0 }, /* Variable */
> +};
> +
> +static const struct MemmapEntry loader_memmap[] = {
> +    [LOADER_KERNEL] =    { 0x00000000,     0x4000000 },
> +    [LOADER_INITRD] =    { 0x04000000,           0x0 }, /* Variable */
> +    [LOADER_CMDLINE] =   { 0x0ff00000,      0x100000 },
> +};
> +
> +static const struct MemmapEntry loader_rommap[] = {
> +    [LOADER_BOOTROM] =   { 0x1fc00000,        0x1000 },
> +    [LOADER_PARAM] =     { 0x1fc01000,       0x10000 },
> +};
> +
> +static struct _loaderparams {
> +    uint64_t cpu_freq;
> +    uint64_t ram_size;
> +    const char *kernel_cmdline;
> +    const char *kernel_filename;
> +    const char *initrd_filename;
> +    uint64_t kernel_entry;
> +    uint64_t a0, a1, a2;
> +} loaderparams;
> +
> +static uint64_t loongson3_pm_read(void *opaque, hwaddr addr, unsigned size)
> +{
> +    return 0;
> +}
> +
> +static void loongson3_pm_write(void *opaque, hwaddr addr, uint64_t val, unsigned size)
> +{
> +    if (addr != PM_CNTL_MODE) {
> +        return;
> +    }
> +
> +    switch (val) {
> +    case 0x00:
> +        qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
> +        return;
> +    case 0xff:
> +        qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN);
> +        return;
> +    default:
> +        return;
> +    }
> +}
> +
> +static const MemoryRegionOps loongson3_pm_ops = {
> +    .read  = loongson3_pm_read,
> +    .write = loongson3_pm_write,
> +    .endianness = DEVICE_NATIVE_ENDIAN,
> +};
> +
> +static struct efi_memory_map_loongson *init_memory_map(void *g_map)
> +{
> +    struct efi_memory_map_loongson *emap = g_map;
> +
> +    emap->nr_map = 2;
> +    emap->mem_freq = 300000000;
> +
> +    emap->map[0].node_id = 0;
> +    emap->map[0].mem_type = 1;
> +    emap->map[0].mem_start = 0x0;
> +    emap->map[0].mem_size = 240;
> +
> +    emap->map[1].node_id = 0;
> +    emap->map[1].mem_type = 2;
> +    emap->map[1].mem_start = 0x90000000;
> +    emap->map[1].mem_size = (loaderparams.ram_size / MiB) - 256;
> +
> +    return emap;
> +}
> +
> +static uint64_t get_cpu_freq(void)
> +{
> +    int ret;
> +    uint64_t freq;
> +    struct kvm_one_reg freq_reg = {
> +        .id = KVM_REG_MIPS_COUNT_HZ,
> +        .addr = (uintptr_t)(&freq)
> +    };
> +
> +    if (!kvm_enabled()) {
> +        return 200 * 1000 * 1000;

You earlier commented:
"Loongson-3 CPU (MIPS64R2 with extensions, 800~2000MHz"

Why not use 800 here?

> +    } else {
> +        ret = kvm_vcpu_ioctl(first_cpu, KVM_GET_ONE_REG, &freq_reg);
> +        if (ret < 0) {
> +            return 1600 * 1000 * 1000;
> +        }
> +        return (freq * 2);
> +    }
> +}
> +
> +static struct efi_cpuinfo_loongson *init_cpu_info(void *g_cpuinfo_loongson)
> +{
> +    struct efi_cpuinfo_loongson *c = g_cpuinfo_loongson;
> +
> +    c->cputype = Loongson_3A;
> +    c->processor_id = MIPS_CPU(first_cpu)->env.CP0_PRid;
> +    if (loaderparams.cpu_freq > UINT_MAX) {
> +        c->cpu_clock_freq = UINT_MAX;
> +    } else {
> +        c->cpu_clock_freq = loaderparams.cpu_freq;
> +    }
> +
> +    c->cpu_startup_core_id = 0;
> +    c->nr_cpus = current_machine->smp.cpus;
> +    c->total_node = (current_machine->smp.cpus + 3) / 4;
> +
> +    return c;
> +}
> +
> +static struct system_loongson *init_system_loongson(void *g_system)
> +{
> +    struct system_loongson *s = g_system;
> +
> +    s->ccnuma_smp = 0;
> +    s->sing_double_channel = 1;
> +    s->nr_uarts = 1;
> +    s->uarts[0].iotype = 2;
> +    s->uarts[0].int_offset = 2;
> +    s->uarts[0].uartclk = 25000000; /* Random value */
> +    s->uarts[0].uart_base = virt_memmap[VIRT_UART].base;
> +
> +    return s;
> +}
> +
> +static struct irq_source_routing_table *init_irq_source(void *g_irq_source)
> +{
> +    struct irq_source_routing_table *irq_info = g_irq_source;
> +
> +    irq_info->node_id = 0;
> +    irq_info->PIC_type = 0;
> +    irq_info->dma_mask_bits = 64;
> +    irq_info->pci_mem_start_addr = virt_memmap[VIRT_PCIE_MMIO].base;
> +    irq_info->pci_mem_end_addr   = virt_memmap[VIRT_PCIE_MMIO].base +
> +                                   virt_memmap[VIRT_PCIE_MMIO].size - 1;
> +    irq_info->pci_io_start_addr  = virt_memmap[VIRT_PCIE_PIO].base;
> +
> +    return irq_info;
> +}
> +
> +static struct interface_info *init_interface_info(void *g_interface)
> +{
> +    struct interface_info *interface = g_interface;
> +
> +    interface->vers = 0x01;
> +    strcpy(interface->description, "UEFI_Version_v1.0");
> +
> +    return interface;
> +}
> +
> +static struct board_devices *board_devices_info(void *g_board)
> +{
> +    struct board_devices *bd = g_board;
> +
> +    strcpy(bd->name, "Loongson-3A-VIRT-1w-V1.00-demo");
> +
> +    return bd;
> +}
> +
> +static struct loongson_special_attribute *init_special_info(void *g_special)
> +{
> +    struct loongson_special_attribute *special = g_special;
> +
> +    strcpy(special->special_name, "2017-05-01");

strpadcpy?

> +
> +    return special;
> +}
> +
> +static void init_loongson_params(struct loongson_params *lp, void *p)
> +{
> +    lp->memory_offset = (unsigned long long)init_memory_map(p)
> +                        - (unsigned long long)lp;
> +    p += align(sizeof(struct efi_memory_map_loongson));

       p += ROUND_UP(sizeof(struct efi_memory_map_loongson), 64);

or use QEMU_ALIGN_PTR_UP()?

> +
> +    lp->cpu_offset = (unsigned long long)init_cpu_info(p)
> +                     - (unsigned long long)lp;
> +    p += align(sizeof(struct efi_cpuinfo_loongson));
> +
> +    lp->system_offset = (unsigned long long)init_system_loongson(p)
> +                        - (unsigned long long)lp;
> +    p += align(sizeof(struct system_loongson));
> +
> +    lp->irq_offset = (unsigned long long)init_irq_source(p)
> +                     - (unsigned long long)lp;
> +    p += align(sizeof(struct irq_source_routing_table));
> +
> +    lp->interface_offset = (unsigned long long)init_interface_info(p)
> +                           - (unsigned long long)lp;
> +    p += align(sizeof(struct interface_info));
> +
> +    lp->boarddev_table_offset = (unsigned long long)board_devices_info(p)
> +                                - (unsigned long long)lp;
> +    p += align(sizeof(struct board_devices));
> +
> +    lp->special_offset = (unsigned long long)init_special_info(p)
> +                         - (unsigned long long)lp;
> +    p += align(sizeof(struct loongson_special_attribute));
> +}
> +
> +static void init_reset_system(struct efi_reset_system_t *reset)
> +{
> +    reset->Shutdown = 0xffffffffbfc000a8;
> +    reset->ResetCold = 0xffffffffbfc00080;
> +    reset->ResetWarm = 0xffffffffbfc00080;
> +}
> +
> +static void init_boot_param(void)
> +{
> +    void *p;
> +    struct boot_params *bp;
> +
> +    p = g_malloc0(loader_rommap[LOADER_PARAM].size);
> +    bp = p;
> +
> +    bp->efi.smbios.vers = 1;
> +    init_reset_system(&(bp->reset_system));
> +    p += align(sizeof(struct boot_params));
> +    init_loongson_params(&(bp->efi.smbios.lp), p);
> +
> +    rom_add_blob_fixed("params_rom", bp,
> +                       loader_rommap[LOADER_PARAM].size,
> +                       loader_rommap[LOADER_PARAM].base);
> +
> +    g_free(bp);
> +
> +    loaderparams.a2 = cpu_mips_phys_to_kseg0(NULL,
> +                                             loader_rommap[LOADER_PARAM].base);
> +}
> +
> +static void init_boot_rom(void)
> +{
> +    const unsigned int boot_code[] = {
> +        0x40086000,   /* mfc0    t0, CP0_STATUS                               */
> +        0x240900E4,   /* li      t1, 0xe4         #set kx, sx, ux, erl        */
> +        0x01094025,   /* or      t0, t0, t1                                   */
> +        0x3C090040,   /* lui     t1, 0x40         #set bev                    */
> +        0x01094025,   /* or      t0, t0, t1                                   */
> +        0x40886000,   /* mtc0    t0, CP0_STATUS                               */
> +        0x00000000,
> +        0x40806800,   /* mtc0    zero, CP0_CAUSE                              */
> +        0x00000000,
> +        0x400A7801,   /* mfc0    t2, $15, 1                                   */
> +        0x314A00FF,   /* andi    t2, 0x0ff                                    */
> +        0x3C089000,   /* dli     t0, 0x900000003ff01000                       */
> +        0x00084438,
> +        0x35083FF0,
> +        0x00084438,
> +        0x35081000,
> +        0x314B0003,   /* andi    t3, t2, 0x3      #local cpuid                */
> +        0x000B5A00,   /* sll     t3, 8                                        */
> +        0x010B4025,   /* or      t0, t0, t3                                   */
> +        0x314C000C,   /* andi    t4, t2, 0xc      #node id                    */
> +        0x000C62BC,   /* dsll    t4, 42                                       */
> +        0x010C4025,   /* or      t0, t0, t4                                   */
> +                      /* WaitForInit:                                         */
> +        0xDD020020,   /* ld      v0, FN_OFF(t0)   #FN_OFF 0x020               */
> +        0x1040FFFE,   /* beqz    v0, WaitForInit                              */
> +        0x00000000,   /* nop                                                  */
> +        0xDD1D0028,   /* ld      sp, SP_OFF(t0)   #FN_OFF 0x028               */
> +        0xDD1C0030,   /* ld      gp, GP_OFF(t0)   #FN_OFF 0x030               */
> +        0xDD050038,   /* ld      a1, A1_OFF(t0)   #FN_OFF 0x038               */
> +        0x00400008,   /* jr      v0               #byebye                     */
> +        0x00000000,   /* nop                                                  */
> +        0x1000FFFF,   /* 1:  b   1b                                           */
> +        0x00000000,   /* nop                                                  */
> +
> +                      /* Reset                                                */
> +        0x3C0C9000,   /* dli     t0, 0x9000000010080010                       */
> +        0x358C0000,
> +        0x000C6438,
> +        0x358C1008,
> +        0x000C6438,
> +        0x358C0010,
> +        0x240D0000,   /* li      t1, 0x00                                     */
> +        0xA18D0000,   /* sb      t1, (t0)                                     */
> +        0x1000FFFF,   /* 1:  b   1b                                           */
> +        0x00000000,   /* nop                                                  */
> +
> +                      /* Shutdown                                             */
> +        0x3C0C9000,   /* dli     t0, 0x9000000010080010                       */
> +        0x358C0000,
> +        0x000C6438,
> +        0x358C1008,
> +        0x000C6438,
> +        0x358C0010,
> +        0x240D00FF,   /* li      t1, 0xff                                     */
> +        0xA18D0000,   /* sb      t1, (t0)                                     */
> +        0x1000FFFF,   /* 1:  b   1b                                           */
> +        0x00000000    /* nop                                                  */
> +    };
> +
> +    rom_add_blob_fixed("boot_rom", boot_code, sizeof(boot_code),
> +                        loader_rommap[LOADER_BOOTROM].base);
> +}
> +
> +static void fw_cfg_boot_set(void *opaque, const char *boot_device,
> +                            Error **errp)
> +{
> +    fw_cfg_modify_i16(opaque, FW_CFG_BOOT_DEVICE, boot_device[0]);
> +}
> +
> +static void fw_conf_init(unsigned long ram_size)
> +{
> +    FWCfgState *fw_cfg;
> +    hwaddr cfg_addr = virt_memmap[VIRT_FW_CFG].base;
> +
> +    fw_cfg = fw_cfg_init_mem_wide(cfg_addr, cfg_addr + 8, 8, 0, NULL);
> +    fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, (uint16_t)current_machine->smp.cpus);
> +    fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)current_machine->smp.max_cpus);
> +    fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
> +    fw_cfg_add_i32(fw_cfg, FW_CFG_MACHINE_VERSION, 1);
> +    fw_cfg_add_i64(fw_cfg, FW_CFG_CPU_FREQ, get_cpu_freq());
> +    qemu_register_boot_set(fw_cfg_boot_set, fw_cfg);
> +}
> +
> +static int set_prom_cmdline(ram_addr_t initrd_offset, long initrd_size)
> +{
> +    hwaddr cmdline_vaddr;
> +    char memenv[32];
> +    char highmemenv[32];
> +    void *cmdline_buf;
> +    unsigned int *parg_env;
> +    int ret = 0;
> +
> +    /* Allocate cmdline_buf for command line. */
> +    cmdline_buf = g_malloc0(loader_memmap[LOADER_CMDLINE].size);
> +    cmdline_vaddr = cpu_mips_phys_to_kseg0(NULL,
> +                                           loader_memmap[LOADER_CMDLINE].base);
> +
> +    /*
> +     * Layout of cmdline_buf looks like this:
> +     * argv[0], argv[1], 0, env[0], env[1], ... env[i], 0,
> +     * argv[0]'s data, argv[1]'s data, env[0]'data, ..., env[i]'s data, 0
> +     */
> +    parg_env = (void *)cmdline_buf;
> +
> +    ret = (3 + 1) * 4;
> +    *parg_env++ = cmdline_vaddr + ret;
> +    ret += (1 + snprintf(cmdline_buf + ret, 256 - ret, "g"));
> +
> +    /* argv1 */
> +    *parg_env++ = cmdline_vaddr + ret;
> +    if (initrd_size > 0)
> +        ret += (1 + snprintf(cmdline_buf + ret, 256 - ret,
> +                "rd_start=0x" TARGET_FMT_lx " rd_size=%li %s",
> +                cpu_mips_phys_to_kseg0(NULL, initrd_offset),
> +                initrd_size, loaderparams.kernel_cmdline));
> +    else
> +        ret += (1 + snprintf(cmdline_buf + ret, 256 - ret, "%s",
> +                loaderparams.kernel_cmdline));
> +
> +    /* argv2 */
> +    *parg_env++ = cmdline_vaddr + 4 * ret;
> +
> +    /* env */
> +    sprintf(memenv, "%ld", loaderparams.ram_size > 0x10000000
> +            ? 256 : (loaderparams.ram_size >> 20));

Please use 256 * MiB and MiB.

(I'm not sure why you check this, since you enforce 512M min).

> +    sprintf(highmemenv, "%ld", loaderparams.ram_size > 0x10000000
> +            ? (loaderparams.ram_size >> 20) - 256 : 0);
> +
> +    rom_add_blob_fixed("cmdline", cmdline_buf,
> +                       loader_memmap[LOADER_CMDLINE].size,
> +                       loader_memmap[LOADER_CMDLINE].base);
> +
> +    g_free(cmdline_buf);
> +
> +    loaderparams.a0 = 2;
> +    loaderparams.a1 = cmdline_vaddr;
> +
> +    return 0;
> +}
> +
> +static uint64_t load_kernel(CPUMIPSState *env)
> +{
> +    long kernel_size;
> +    ram_addr_t initrd_offset;
> +    uint64_t kernel_entry, kernel_low, kernel_high, initrd_size;
> +
> +    kernel_size = load_elf(loaderparams.kernel_filename, NULL,
> +                           cpu_mips_kseg0_to_phys, NULL,
> +                           (uint64_t *)&kernel_entry,
> +                           (uint64_t *)&kernel_low, (uint64_t *)&kernel_high,
> +                           NULL, 0, EM_MIPS, 1, 0);
> +    if (kernel_size < 0) {
> +        error_report("could not load kernel '%s': %s",
> +                     loaderparams.kernel_filename,
> +                     load_elf_strerror(kernel_size));
> +        exit(1);
> +    }
> +
> +    /* load initrd */
> +    initrd_size = 0;
> +    initrd_offset = 0;
> +    if (loaderparams.initrd_filename) {
> +        initrd_size = get_image_size(loaderparams.initrd_filename);
> +        if (initrd_size > 0) {
> +            initrd_offset = (kernel_high + ~INITRD_PAGE_MASK) &
> +                            INITRD_PAGE_MASK;
> +            initrd_offset = MAX(initrd_offset,
> +                                loader_memmap[LOADER_INITRD].base);
> +
> +            if (initrd_offset + initrd_size > ram_size) {
> +                error_report("memory too small for initial ram disk '%s'",
> +                             loaderparams.initrd_filename);
> +                exit(1);
> +            }
> +
> +            initrd_size = load_image_targphys(loaderparams.initrd_filename,
> +                                              initrd_offset,
> +                                              ram_size - initrd_offset);
> +        }
> +
> +        if (initrd_size == (target_ulong) -1) {
> +            error_report("could not load initial ram disk '%s'",
> +                         loaderparams.initrd_filename);
> +            exit(1);
> +        }
> +    }
> +
> +    /* Setup prom cmdline. */
> +    set_prom_cmdline(initrd_offset, initrd_size);
> +
> +    return kernel_entry;
> +}
> +
> +static void main_cpu_reset(void *opaque)
> +{
> +    MIPSCPU *cpu = opaque;
> +    CPUMIPSState *env = &cpu->env;
> +
> +    cpu_reset(CPU(cpu));
> +
> +    /* Loongson-3 reset stuff */
> +    if (loaderparams.kernel_filename) {
> +        if (cpu == MIPS_CPU(first_cpu)) {
> +            env->active_tc.gpr[4] = loaderparams.a0;
> +            env->active_tc.gpr[5] = loaderparams.a1;
> +            env->active_tc.gpr[6] = loaderparams.a2;
> +            env->active_tc.PC = loaderparams.kernel_entry;
> +        }
> +        env->CP0_Status &= ~((1 << CP0St_BEV) | (1 << CP0St_ERL));
> +    }
> +}
> +
> +static inline void loongson3_virt_devices_init(MachineState *machine, DeviceState *pic)
> +{
> +    int i;
> +    qemu_irq irq;
> +    PCIBus *pci_bus;
> +    DeviceState *dev;
> +    MemoryRegion *pio_alias;
> +    MemoryRegion *mmio_alias, *mmio_reg;
> +    MemoryRegion *ecam_alias, *ecam_reg;
> +
> +    dev = qdev_new(TYPE_GPEX_HOST);
> +    sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
> +    pci_bus = PCI_HOST_BRIDGE(dev)->bus;
> +
> +    ecam_alias = g_new0(MemoryRegion, 1);
> +    ecam_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0);
> +    memory_region_init_alias(ecam_alias, OBJECT(dev), "pcie-ecam",
> +                             ecam_reg, 0, virt_memmap[VIRT_PCIE_ECAM].size);
> +    memory_region_add_subregion(get_system_memory(),
> +                                virt_memmap[VIRT_PCIE_ECAM].base, ecam_alias);
> +
> +    mmio_alias = g_new0(MemoryRegion, 1);
> +    mmio_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 1);
> +    memory_region_init_alias(mmio_alias, OBJECT(dev), "pcie-mmio",
> +                             mmio_reg, virt_memmap[VIRT_PCIE_MMIO].base,
> +                             virt_memmap[VIRT_PCIE_MMIO].size);
> +    memory_region_add_subregion(get_system_memory(),
> +                                virt_memmap[VIRT_PCIE_MMIO].base, mmio_alias);
> +
> +    pio_alias = g_new0(MemoryRegion, 1);
> +    memory_region_init_alias(pio_alias, OBJECT(dev), "pcie-pio",
> +                             get_system_io(), 0, virt_memmap[VIRT_PCIE_PIO].size);
> +    memory_region_add_subregion(get_system_memory(),
> +                                virt_memmap[VIRT_PCIE_PIO].base, pio_alias);
> +    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 2, virt_memmap[VIRT_PCIE_PIO].base);
> +
> +    for (i = 0; i < GPEX_NUM_IRQS; i++) {
> +        irq = qdev_get_gpio_in(pic, PCIE_IRQ_BASE + i);
> +        sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, irq);
> +        gpex_set_irq_num(GPEX_HOST(dev), i, PCIE_IRQ_BASE + i);
> +    }
> +
> +    pci_vga_init(pci_bus);
> +
> +    if (defaults_enabled()) {
> +        pci_create_simple(pci_bus, -1, "pci-ohci");
> +        usb_create_simple(usb_bus_find(-1), "usb-kbd");
> +        usb_create_simple(usb_bus_find(-1), "usb-tablet");
> +    }
> +
> +    for (i = 0; i < nb_nics; i++) {
> +        NICInfo *nd = &nd_table[i];
> +
> +        if (!nd->model) {
> +            nd->model = g_strdup("virtio");
> +        }
> +
> +        pci_nic_init_nofail(nd, pci_bus, nd->model, NULL);
> +    }
> +}
> +
> +static void mips_loongson3_virt_init(MachineState *machine)
> +{
> +    int i;
> +    long bios_size;
> +    MIPSCPU *cpu;
> +    CPUMIPSState *env;
> +    DeviceState *liointc;
> +    char *filename;
> +    const char *kernel_cmdline = machine->kernel_cmdline;
> +    const char *kernel_filename = machine->kernel_filename;
> +    const char *initrd_filename = machine->initrd_filename;
> +    ram_addr_t ram_size = machine->ram_size;
> +    MemoryRegion *address_space_mem = get_system_memory();
> +    MemoryRegion *ram = g_new(MemoryRegion, 1);
> +    MemoryRegion *bios = g_new(MemoryRegion, 1);
> +    MemoryRegion *iomem = g_new(MemoryRegion, 1);
> +
> +    /* TODO: TCG will support all CPU types */
> +    if (!kvm_enabled()) {
> +        if (!machine->cpu_type) {
> +            machine->cpu_type = MIPS_CPU_TYPE_NAME("Loongson-3A1000");
> +        }
> +        if (!strstr(machine->cpu_type, "Loongson-3A1000")) {
> +            error_report("Loongson-3/TCG need cpu type Loongson-3A1000");
> +            exit(1);
> +        }
> +    } else {
> +        if (!machine->cpu_type) {
> +            machine->cpu_type = MIPS_CPU_TYPE_NAME("Loongson-3A4000");
> +        }
> +        if (!strstr(machine->cpu_type, "Loongson-3A4000")) {
> +            error_report("Loongson-3/KVM need cpu type Loongson-3A4000");
> +            exit(1);
> +        }
> +    }
> +
> +    if (ram_size < 512 * MiB) {
> +        error_report("Loongson-3 need at least 512MB memory");

Typo "needs", but why?

> +        exit(1);
> +    }
> +
> +    /*
> +     * The whole MMIO range among configure registers doesn't generate
> +     * exception when accessing invalid memory. Create an empty slot to
> +     * emulate this feature.
> +     */
> +    empty_slot_init("fallback", 0, 0x80000000);

Again, this doesn't look correct (no comment in my previous review).

> +
> +    liointc = qdev_new("loongson.liointc");
> +    sysbus_realize_and_unref(SYS_BUS_DEVICE(liointc), &error_fatal);
> +
> +    sysbus_mmio_map(SYS_BUS_DEVICE(liointc), 0, virt_memmap[VIRT_LIOINTC].base);
> +
> +    for (i = 0; i < machine->smp.cpus; i++) {
> +        int ip;
> +
> +        /* init CPUs */
> +        cpu = MIPS_CPU(cpu_create(machine->cpu_type));
> +
> +        /* Init internal devices */
> +        cpu_mips_irq_init_cpu(cpu);
> +        cpu_mips_clock_init(cpu);
> +        qemu_register_reset(main_cpu_reset, cpu);
> +
> +        if (i >= 4) {
> +            continue; /* Only node-0 can be connected to LIOINTC */
> +        }
> +
> +        for (ip = 0; ip < 4 ; ip++) {
> +            int pin = i * 4 + ip;
> +            sysbus_connect_irq(SYS_BUS_DEVICE(liointc),
> +                               pin, cpu->env.irq[ip + 2]);
> +        }
> +    }
> +    env = &MIPS_CPU(first_cpu)->env;
> +
> +    /* Allocate RAM/BIOS, 0x00000000~0x10000000 is alias of 0x80000000~0x90000000 */
> +    memory_region_init_rom(bios, NULL, "loongson3.bios",
> +                           virt_memmap[VIRT_BIOS_ROM].size, &error_fatal);
> +    memory_region_init_alias(ram, NULL, "loongson3.lowmem",
> +                           machine->ram, 0, virt_memmap[VIRT_LOWMEM].size);
> +    memory_region_init_io(iomem, NULL, &loongson3_pm_ops,
> +                           NULL, "loongson3_pm", virt_memmap[VIRT_PM].size);
> +
> +    memory_region_add_subregion(address_space_mem,
> +                      virt_memmap[VIRT_LOWMEM].base, ram);
> +    memory_region_add_subregion(address_space_mem,
> +                      virt_memmap[VIRT_BIOS_ROM].base, bios);
> +    memory_region_add_subregion(address_space_mem,
> +                      virt_memmap[VIRT_HIGHMEM].base, machine->ram);
> +    memory_region_add_subregion(address_space_mem,
> +                      virt_memmap[VIRT_PM].base, iomem);
> +
> +    /*
> +     * We do not support flash operation, just loading bios.bin as raw BIOS.
> +     * Please use -L to set the BIOS path and -bios to set bios name.
> +     */
> +
> +    if (kernel_filename) {
> +        loaderparams.cpu_freq = get_cpu_freq();
> +        loaderparams.ram_size = ram_size;
> +        loaderparams.kernel_filename = kernel_filename;
> +        loaderparams.kernel_cmdline = kernel_cmdline;
> +        loaderparams.initrd_filename = initrd_filename;
> +        loaderparams.kernel_entry = load_kernel(env);
> +
> +        init_boot_rom();
> +        init_boot_param();
> +    } else {
> +        if (bios_name == NULL) {
> +                bios_name = LOONGSON3_BIOSNAME;
> +        }
> +        filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
> +        if (filename) {
> +            bios_size = load_image_targphys(filename,
> +                                            virt_memmap[VIRT_BIOS_ROM].base,
> +                                            virt_memmap[VIRT_BIOS_ROM].size);
> +            g_free(filename);
> +        } else {
> +            bios_size = -1;
> +        }
> +
> +        if ((bios_size < 0 || bios_size > virt_memmap[VIRT_BIOS_ROM].size) &&
> +            !kernel_filename && !qtest_enabled()) {
> +            error_report("Could not load MIPS bios '%s'", bios_name);
> +            exit(1);
> +        }
> +
> +        fw_conf_init(ram_size);
> +    }
> +
> +    msi_nonbroken = true;
> +    loongson3_virt_devices_init(machine, liointc);
> +
> +    sysbus_create_simple("goldfish_rtc", virt_memmap[VIRT_RTC].base,
> +                         qdev_get_gpio_in(liointc, RTC_IRQ));
> +
> +    serial_mm_init(address_space_mem, virt_memmap[VIRT_UART].base, 0,
> +                   qdev_get_gpio_in(liointc, UART_IRQ), 115200, serial_hd(0),
> +                   DEVICE_NATIVE_ENDIAN);
> +}
> +
> +static void mips_loongson3_virt_machine_init(MachineClass *mc)
> +{
> +    mc->desc = "Loongson-3 Virtualization Platform";
> +    mc->init = mips_loongson3_virt_init;
> +    mc->block_default_type = IF_IDE;
> +    mc->max_cpus = LOONGSON_MAX_VCPUS;
> +    mc->default_ram_id = "loongson3.highram";
> +    mc->default_ram_size = 1600 * MiB;
> +    mc->kvm_type = mips_kvm_type;
> +    mc->minimum_page_bits = 14;
> +}
> +
> +DEFINE_MACHINE("loongson3-virt", mips_loongson3_virt_machine_init)
> diff --git a/hw/mips/meson.build b/hw/mips/meson.build
> index 46294b7..32c8b95 100644
> --- a/hw/mips/meson.build
> +++ b/hw/mips/meson.build
> @@ -1,6 +1,7 @@
>  mips_ss = ss.source_set()
> -mips_ss.add(files('addr.c', 'mips_int.c'))
> +mips_ss.add(files('addr.c', 'mips_int.c', 'fw_cfg.c'))
>  mips_ss.add(when: 'CONFIG_FULOONG', if_true: files('fuloong2e.c'))
> +mips_ss.add(when: 'CONFIG_LOONGSON3V', if_true: files('loongson3_virt.c'))
>  mips_ss.add(when: 'CONFIG_JAZZ', if_true: files('jazz.c'))
>  mips_ss.add(when: 'CONFIG_MALTA', if_true: files('gt64xxx_pci.c', 'malta.c'))
>  mips_ss.add(when: 'CONFIG_MIPSSIM', if_true: files('mipssim.c'))
>
Philippe Mathieu-Daudé Sept. 16, 2020, 8:08 a.m. UTC | #2
On 9/16/20 9:56 AM, Philippe Mathieu-Daudé wrote:
> On 9/16/20 4:12 AM, Huacai Chen wrote:
[...]
>> diff --git a/default-configs/mips64el-softmmu.mak b/default-configs/mips64el-softmmu.mak
>> index 9f8a3ef..26c660a 100644
>> --- a/default-configs/mips64el-softmmu.mak
>> +++ b/default-configs/mips64el-softmmu.mak
>> @@ -3,6 +3,7 @@
>>  include mips-softmmu-common.mak
>>  CONFIG_IDE_VIA=y
>>  CONFIG_FULOONG=y
>> +CONFIG_LOONGSON3V=y
>>  CONFIG_ATI_VGA=y
>>  CONFIG_RTL8139_PCI=y
>>  CONFIG_JAZZ=y
>> diff --git a/hw/mips/Kconfig b/hw/mips/Kconfig
>> index 67d39c5..cc5609b 100644
>> --- a/hw/mips/Kconfig
>> +++ b/hw/mips/Kconfig
>> @@ -45,6 +45,17 @@ config FULOONG
>>      bool
>>      select PCI_BONITO
>>  
>> +config LOONGSON3V
>> +    bool
>> +    select PCKBD
>> +    select SERIAL
>> +    select GOLDFISH_RTC
>> +    select LOONGSON_LIOINTC
>> +    select PCI_EXPRESS_GENERIC_BRIDGE
>> +    select VIRTIO_VGA
>> +    select QXL if SPICE
>> +    select MSI_NONBROKEN

Another error:

../meson.build:577:4: ERROR: Running configure command failed.
The following clauses were found for VIRTIO_VGA
    config VIRTIO_VGA depends on VIRTIO_PCI
    select VIRTIO_VGA if LOONGSON3V
Traceback (most recent call last):
  File "scripts/minikconf.py", line 703, in <module>
    config = data.compute_config()
  File "scripts/minikconf.py", line 253, in compute_config
    clause.process()
  File "scripts/minikconf.py", line 200, in process
    self.dest.set_value(True, self)
  File "scripts/minikconf.py", line 118, in set_value
    raise KconfigDataError('contradiction between clauses when setting
%s' % self)
__main__.KconfigDataError: contradiction between clauses when setting
VIRTIO_VGA

>> +
>>  config MIPS_CPS
>>      bool
>>      select PTIMER
Huacai Chen Sept. 16, 2020, 9:49 a.m. UTC | #3
Hi, Philippe,

On Wed, Sep 16, 2020 at 3:56 PM Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
>
> Hi Huacai,
>
> On 9/16/20 4:12 AM, Huacai Chen wrote:
> > Add Loongson-3 based machine support, it use liointc as the interrupt
> > controler and use GPEX as the pci controller. Currently it can work with
> > both TCG and KVM.
> >
> > As the machine model is not based on any exiting physical hardware, the
> > name of the machine is "loongson3-virt". It may be superseded in future
> > by a real machine model. If this happens, then a regular deprecation
> > procedure shall occur for "loongson3-virt" machine.
>
> Alternatively you can name it loongson3-virt-5.2 from start.
Aleksandar doesn't like a version number, so let's keep the name as is.

>
> >
> > We now already have a full functional Linux kernel (based on Linux-5.4.x
> > LTS, the kvm host side and guest side have both been upstream for Linux-
> > 5.9, but Linux-5.9 has not been released yet) here:
> >
> > https://github.com/chenhuacai/linux
> >
> > Of course the upstream kernel is also usable (though it is "unstable"
> > now):
> >
> > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
> >
> > How to use QEMU/Loongson-3?
> > 1, Download kernel source from the above URL;
> > 2, Build a kernel with arch/mips/configs/loongson3_defconfig;
> > 3, Boot a Loongson-3A4000 host with this kernel (for KVM mode);
> > 4, Build QEMU-master with this patchset;
>
> Which produces all the following errors:
>
> hw/mips/loongson3_virt.c: In function 'get_cpu_freq':
> hw/mips/loongson3_virt.c:372:12: error: variable 'freq_reg' has
> initializer but incomplete type
>      struct kvm_one_reg freq_reg = {
>             ^
> hw/mips/loongson3_virt.c:373:9: error: unknown field 'id' specified in
> initializer
>          .id = KVM_REG_MIPS_COUNT_HZ,
>          ^
> hw/mips/loongson3_virt.c:373:15: error: 'KVM_REG_MIPS_COUNT_HZ'
> undeclared (first use in this function)
>          .id = KVM_REG_MIPS_COUNT_HZ,
>                ^
I don't know how to reproduce these errors, struct kvm_one_reg and
KVM_REG_MIPS_COUNT_HZ are both defined..., could you please tell me?
My build steps are like this:
mkdir build
cd build
../configure
make

> hw/mips/loongson3_virt.c:373:15: note: each undeclared identifier is
> reported only once for each function it appears in
> hw/mips/loongson3_virt.c:373:15: error: excess elements in struct
> initializer [-Werror]
> hw/mips/loongson3_virt.c:373:15: note: (near initialization for 'freq_reg')
> hw/mips/loongson3_virt.c:374:9: error: unknown field 'addr' specified in
> initializer
>          .addr = (uintptr_t)(&freq)
>          ^
> hw/mips/loongson3_virt.c:374:17: error: excess elements in struct
> initializer [-Werror]
>          .addr = (uintptr_t)(&freq)
>                  ^
> hw/mips/loongson3_virt.c:374:17: note: (near initialization for 'freq_reg')
> hw/mips/loongson3_virt.c:372:24: error: storage size of 'freq_reg' isn't
> known
>      struct kvm_one_reg freq_reg = {
>                         ^
> hw/mips/loongson3_virt.c:380:41: error: 'KVM_GET_ONE_REG' undeclared
> (first use in this function)
>          ret = kvm_vcpu_ioctl(first_cpu, KVM_GET_ONE_REG, &freq_reg);
>                                          ^
> hw/mips/loongson3_virt.c:372:24: error: unused variable 'freq_reg'
> [-Werror=unused-variable]
>      struct kvm_one_reg freq_reg = {
>                         ^
> hw/mips/loongson3_virt.c: In function 'init_loongson_params':
> hw/mips/loongson3_virt.c:467:25: error: cast from pointer to integer of
> different size [-Werror=pointer-to-int-cast]
>      lp->memory_offset = (unsigned long long)init_memory_map(p)
>                          ^
I guess this happens on a 32bit platform where pointer is 32bit, and
could you please suggest a best solution for this? Maybe use uintptr_t
instead of unsigned long long?

> hw/mips/loongson3_virt.c:468:27: error: cast from pointer to integer of
> different size [-Werror=pointer-to-int-cast]
>                          - (unsigned long long)lp;
>                            ^
> hw/mips/loongson3_virt.c:471:22: error: cast from pointer to integer of
> different size [-Werror=pointer-to-int-cast]
>      lp->cpu_offset = (unsigned long long)init_cpu_info(p)
>                       ^
> hw/mips/loongson3_virt.c:472:24: error: cast from pointer to integer of
> different size [-Werror=pointer-to-int-cast]
>                       - (unsigned long long)lp;
>                         ^
> hw/mips/loongson3_virt.c:475:25: error: cast from pointer to integer of
> different size [-Werror=pointer-to-int-cast]
>      lp->system_offset = (unsigned long long)init_system_loongson(p)
>                          ^
> hw/mips/loongson3_virt.c:476:27: error: cast from pointer to integer of
> different size [-Werror=pointer-to-int-cast]
>                          - (unsigned long long)lp;
>                            ^
> hw/mips/loongson3_virt.c:479:22: error: cast from pointer to integer of
> different size [-Werror=pointer-to-int-cast]
>      lp->irq_offset = (unsigned long long)init_irq_source(p)
>                       ^
> hw/mips/loongson3_virt.c:480:24: error: cast from pointer to integer of
> different size [-Werror=pointer-to-int-cast]
>                       - (unsigned long long)lp;
>                         ^
> hw/mips/loongson3_virt.c:483:28: error: cast from pointer to integer of
> different size [-Werror=pointer-to-int-cast]
>      lp->interface_offset = (unsigned long long)init_interface_info(p)
>                             ^
> hw/mips/loongson3_virt.c:484:30: error: cast from pointer to integer of
> different size [-Werror=pointer-to-int-cast]
>                             - (unsigned long long)lp;
>                               ^
> hw/mips/loongson3_virt.c:487:33: error: cast from pointer to integer of
> different size [-Werror=pointer-to-int-cast]
>      lp->boarddev_table_offset = (unsigned long long)board_devices_info(p)
>                                  ^
> hw/mips/loongson3_virt.c:488:35: error: cast from pointer to integer of
> different size [-Werror=pointer-to-int-cast]
>                                  - (unsigned long long)lp;
>                                    ^
> hw/mips/loongson3_virt.c:491:26: error: cast from pointer to integer of
> different size [-Werror=pointer-to-int-cast]
>      lp->special_offset = (unsigned long long)init_special_info(p)
>                           ^
> hw/mips/loongson3_virt.c:492:28: error: cast from pointer to integer of
> different size [-Werror=pointer-to-int-cast]
>                           - (unsigned long long)lp;
>                             ^
> hw/mips/loongson3_virt.c: In function 'set_prom_cmdline':
> hw/mips/loongson3_virt.c:652:21: error: format '%ld' expects argument of
> type 'long int', but argument 3 has type 'uint64_t {aka long long
> unsigned int}' [-Werror=format=]
>      sprintf(memenv, "%ld", loaderparams.ram_size > 0x10000000
>                      ^
> hw/mips/loongson3_virt.c:654:25: error: format '%ld' expects argument of
> type 'long int', but argument 3 has type 'uint64_t {aka long long
> unsigned int}' [-Werror=format=]
>      sprintf(highmemenv, "%ld", loaderparams.ram_size > 0x10000000
>                          ^
> cc1: all warnings being treated as errors
> Makefile.ninja:2459: recipe for target
> 'libqemu-mips64el-softmmu.fa.p/hw_mips_loongson3_virt.c.obj' failed
> make: *** [libqemu-mips64el-softmmu.fa.p/hw_mips_loongson3_virt.c.obj]
> Error 1
>
> Anyway I'll keep reviewing this patch.
>
> > 5, modprobe kvm (only necessary for KVM mode);
> > 6, Use QEMU with TCG:
> >        qemu-system-mips64el -M loongson3-virt,accel=tcg -cpu Loongson-3A1000 -kernel <path_to_kernel> -append ...
> >    Use QEMU with KVM:
> >        qemu-system-mips64el -M loongson3-virt,accel=kvm -cpu Loongson-3A4000 -kernel <path_to_kernel> -append ...
> >
> >    The "-cpu" parameter is optional here and QEMU will use the correct type for TCG/KVM automatically.
> >
> > Signed-off-by: Huacai Chen <chenhc@lemote.com>
> > Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
> > ---
> >  default-configs/mips64el-softmmu.mak |   1 +
> >  hw/mips/Kconfig                      |  11 +
> >  hw/mips/fw_cfg.c                     |  35 ++
> >  hw/mips/fw_cfg.h                     |  19 +
> >  hw/mips/loongson3_virt.c             | 956 +++++++++++++++++++++++++++++++++++
> >  hw/mips/meson.build                  |   3 +-
> >  6 files changed, 1024 insertions(+), 1 deletion(-)
> >  create mode 100644 hw/mips/fw_cfg.c
> >  create mode 100644 hw/mips/fw_cfg.h
> >  create mode 100644 hw/mips/loongson3_virt.c
> >
> > diff --git a/default-configs/mips64el-softmmu.mak b/default-configs/mips64el-softmmu.mak
> > index 9f8a3ef..26c660a 100644
> > --- a/default-configs/mips64el-softmmu.mak
> > +++ b/default-configs/mips64el-softmmu.mak
> > @@ -3,6 +3,7 @@
> >  include mips-softmmu-common.mak
> >  CONFIG_IDE_VIA=y
> >  CONFIG_FULOONG=y
> > +CONFIG_LOONGSON3V=y
> >  CONFIG_ATI_VGA=y
> >  CONFIG_RTL8139_PCI=y
> >  CONFIG_JAZZ=y
> > diff --git a/hw/mips/Kconfig b/hw/mips/Kconfig
> > index 67d39c5..cc5609b 100644
> > --- a/hw/mips/Kconfig
> > +++ b/hw/mips/Kconfig
> > @@ -45,6 +45,17 @@ config FULOONG
> >      bool
> >      select PCI_BONITO
> >
> > +config LOONGSON3V
> > +    bool
> > +    select PCKBD
> > +    select SERIAL
> > +    select GOLDFISH_RTC
> > +    select LOONGSON_LIOINTC
> > +    select PCI_EXPRESS_GENERIC_BRIDGE
> > +    select VIRTIO_VGA
> > +    select QXL if SPICE
> > +    select MSI_NONBROKEN
> > +
> >  config MIPS_CPS
> >      bool
> >      select PTIMER
> > diff --git a/hw/mips/fw_cfg.c b/hw/mips/fw_cfg.c
> > new file mode 100644
> > index 0000000..67c4a74
> > --- /dev/null
> > +++ b/hw/mips/fw_cfg.c
> > @@ -0,0 +1,35 @@
> > +/*
> > + * QEMU fw_cfg helpers (MIPS specific)
> > + *
> > + * Copyright (c) 2020 Lemote, Inc.
> > + *
> > + * Author:
> > + *   Huacai Chen (chenhc@lemote.com)
> > + *
> > + * SPDX-License-Identifier: GPL-2.0-or-later
> > + *
> > + * This work is licensed under the terms of the GNU GPL, version 2 or later.
> > + * See the COPYING file in the top-level directory.
> > + */
> > +
> > +#include "qemu/osdep.h"
> > +#include "hw/mips/fw_cfg.h"
> > +#include "hw/nvram/fw_cfg.h"
> > +
> > +const char *fw_cfg_arch_key_name(uint16_t key)
> > +{
> > +    static const struct {
> > +        uint16_t key;
> > +        const char *name;
> > +    } fw_cfg_arch_wellknown_keys[] = {
> > +        {FW_CFG_MACHINE_VERSION, "machine_version"},
> > +        {FW_CFG_CPU_FREQ, "cpu_frequency"},
> > +    };
> > +
> > +    for (size_t i = 0; i < ARRAY_SIZE(fw_cfg_arch_wellknown_keys); i++) {
> > +        if (fw_cfg_arch_wellknown_keys[i].key == key) {
> > +            return fw_cfg_arch_wellknown_keys[i].name;
> > +        }
> > +    }
> > +    return NULL;
> > +}
> > diff --git a/hw/mips/fw_cfg.h b/hw/mips/fw_cfg.h
> > new file mode 100644
> > index 0000000..e317d5b
> > --- /dev/null
> > +++ b/hw/mips/fw_cfg.h
> > @@ -0,0 +1,19 @@
> > +/*
> > + * QEMU fw_cfg helpers (MIPS specific)
> > + *
> > + * Copyright (c) 2020 Huacai Chen
> > + *
> > + * SPDX-License-Identifier: MIT
> > + */
> > +
> > +#ifndef HW_MIPS_FW_CFG_H
> > +#define HW_MIPS_FW_CFG_H
> > +
> > +#include "hw/boards.h"
> > +#include "hw/nvram/fw_cfg.h"
> > +
> > +/* Data for BIOS to identify machine */
> > +#define FW_CFG_MACHINE_VERSION  (FW_CFG_ARCH_LOCAL + 0)
> > +#define FW_CFG_CPU_FREQ         (FW_CFG_ARCH_LOCAL + 1)
> > +
> > +#endif
>
> Please keep the fw_cfg changes in a separate patch.
OK.

>
> > diff --git a/hw/mips/loongson3_virt.c b/hw/mips/loongson3_virt.c
> > new file mode 100644
> > index 0000000..14d3024
> > --- /dev/null
> > +++ b/hw/mips/loongson3_virt.c
> > @@ -0,0 +1,956 @@
> > +/*
> > + * Generic Loongson-3 Platform support
> > + *
> > + * Copyright (c) 2017-2020 Huacai Chen (chenhc@lemote.com)
> > + * Copyright (c) 2017-2020 Jiaxun Yang <jiaxun.yang@flygoat.com>
> > + *
> > + * This program is free software: you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation, either version 2 of the License, or
> > + * (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program. If not, see <https://www.gnu.org/licenses/>.
> > + */
> > +
> > +/*
> > + * Generic virtualized PC Platform based on Loongson-3 CPU (MIPS64R2 with
> > + * extensions, 800~2000MHz)
> > + */
> > +
> > +#include "qemu/osdep.h"
> > +#include "qemu-common.h"
> > +#include "qemu/units.h"
> > +#include "qapi/error.h"
> > +#include "cpu.h"
> > +#include "elf.h"
> > +#include "kvm_mips.h"
> > +#include "hw/boards.h"
> > +#include "hw/char/serial.h"
> > +#include "hw/mips/mips.h"
> > +#include "hw/mips/cpudevs.h"
> > +#include "hw/mips/fw_cfg.h"
> > +#include "hw/misc/empty_slot.h"
> > +#include "hw/intc/i8259.h"
> > +#include "hw/loader.h"
> > +#include "hw/isa/superio.h"
> > +#include "hw/pci/msi.h"
> > +#include "hw/pci/pci.h"
> > +#include "hw/pci/pci_host.h"
> > +#include "hw/pci-host/gpex.h"
> > +#include "hw/rtc/mc146818rtc.h"
> > +#include "hw/usb.h"
> > +#include "net/net.h"
> > +#include "exec/address-spaces.h"
> > +#include "sysemu/kvm.h"
> > +#include "sysemu/qtest.h"
> > +#include "sysemu/reset.h"
> > +#include "sysemu/runstate.h"
> > +#include "qemu/log.h"
> > +#include "qemu/error-report.h"
> > +
> > +#define PM_CNTL_MODE          0x10
> > +
> > +/* Overall MMIO & Memory layout */
> > +enum {
> > +    VIRT_LOWMEM,
> > +    VIRT_PM,
> > +    VIRT_FW_CFG,
> > +    VIRT_RTC,
> > +    VIRT_PCIE_PIO,
> > +    VIRT_PCIE_ECAM,
> > +    VIRT_BIOS_ROM,
> > +    VIRT_UART,
> > +    VIRT_LIOINTC,
> > +    VIRT_PCIE_MMIO,
> > +    VIRT_HIGHMEM
> > +};
> > +
> > +/* Low MEM layout for QEMU kernel loader */
> > +enum {
> > +    LOADER_KERNEL,
> > +    LOADER_INITRD,
> > +    LOADER_CMDLINE
> > +};
> > +
> > +/* BIOS ROM layout for QEMU kernel loader */
> > +enum {
> > +    LOADER_BOOTROM,
> > +    LOADER_PARAM,
> > +};
> > +
> > +struct MemmapEntry {
> > +    hwaddr base;
> > +    hwaddr size;
> > +};
> > +
> > +/*
> > + * LEFI (a UEFI-like interface for BIOS-Kernel boot parameters) data structrues
> > + * defined at arch/mips/include/asm/mach-loongson64/boot_param.h in Linux kernel
> > + */
> > +struct efi_memory_map_loongson {
> > +    uint16_t vers;               /* version of efi_memory_map */
> > +    uint32_t nr_map;             /* number of memory_maps */
> > +    uint32_t mem_freq;           /* memory frequence */
> > +    struct mem_map {
> > +        uint32_t node_id;        /* node_id which memory attached to */
> > +        uint32_t mem_type;       /* system memory, pci memory, pci io, etc. */
> > +        uint64_t mem_start;      /* memory map start address */
> > +        uint32_t mem_size;       /* each memory_map size, not the total size */
> > +    } map[128];
> > +} __attribute__((packed));
>
> QEMU_PACKED
OK.

>
> > +
> > +enum loongson_cpu_type {
> > +    Legacy_2E = 0x0,
> > +    Legacy_2F = 0x1,
> > +    Legacy_3A = 0x2,
> > +    Legacy_3B = 0x3,
> > +    Legacy_1A = 0x4,
> > +    Legacy_1B = 0x5,
> > +    Legacy_2G = 0x6,
> > +    Legacy_2H = 0x7,
> > +    Loongson_1A = 0x100,
> > +    Loongson_1B = 0x101,
> > +    Loongson_2E = 0x200,
> > +    Loongson_2F = 0x201,
> > +    Loongson_2G = 0x202,
> > +    Loongson_2H = 0x203,
> > +    Loongson_3A = 0x300,
> > +    Loongson_3B = 0x301
> > +};
> > +
> > +/*
> > + * Capability and feature descriptor structure for MIPS CPU
> > + */
> > +struct efi_cpuinfo_loongson {
> > +    uint16_t vers;               /* version of efi_cpuinfo_loongson */
> > +    uint32_t processor_id;       /* PRID, e.g. 6305, 6306 */
> > +    uint32_t cputype;            /* Loongson_3A/3B, etc. */
> > +    uint32_t total_node;         /* num of total numa nodes */
> > +    uint16_t cpu_startup_core_id;   /* Boot core id */
> > +    uint16_t reserved_cores_mask;
> > +    uint32_t cpu_clock_freq;     /* cpu_clock */
> > +    uint32_t nr_cpus;
> > +    char cpuname[64];
> > +} __attribute__((packed));
> > +
> > +#define MAX_UARTS 64
> > +struct uart_device {
> > +    uint32_t iotype;
> > +    uint32_t uartclk;
> > +    uint32_t int_offset;
> > +    uint64_t uart_base;
> > +} __attribute__((packed));
> > +
> > +#define MAX_SENSORS 64
> > +#define SENSOR_TEMPER  0x00000001
> > +#define SENSOR_VOLTAGE 0x00000002
> > +#define SENSOR_FAN     0x00000004
> > +struct sensor_device {
> > +    char name[32];  /* a formal name */
> > +    char label[64]; /* a flexible description */
> > +    uint32_t type;       /* SENSOR_* */
> > +    uint32_t id;         /* instance id of a sensor-class */
> > +    uint32_t fan_policy; /* step speed or constant speed */
> > +    uint32_t fan_percent;/* only for constant speed policy */
> > +    uint64_t base_addr;  /* base address of device registers */
> > +} __attribute__((packed));
> > +
> > +struct system_loongson {
> > +    uint16_t vers;               /* version of system_loongson */
> > +    uint32_t ccnuma_smp;         /* 0: no numa; 1: has numa */
> > +    uint32_t sing_double_channel;/* 1: single; 2: double */
> > +    uint32_t nr_uarts;
> > +    struct uart_device uarts[MAX_UARTS];
> > +    uint32_t nr_sensors;
> > +    struct sensor_device sensors[MAX_SENSORS];
> > +    char has_ec;
> > +    char ec_name[32];
> > +    uint64_t ec_base_addr;
> > +    char has_tcm;
> > +    char tcm_name[32];
> > +    uint64_t tcm_base_addr;
> > +    uint64_t workarounds;
> > +    uint64_t of_dtb_addr; /* NULL if not support */
> > +} __attribute__((packed));
> > +
> > +struct irq_source_routing_table {
> > +    uint16_t vers;
> > +    uint16_t size;
> > +    uint16_t rtr_bus;
> > +    uint16_t rtr_devfn;
> > +    uint32_t vendor;
> > +    uint32_t device;
> > +    uint32_t PIC_type;           /* conform use HT or PCI to route to CPU-PIC */
> > +    uint64_t ht_int_bit;         /* 3A: 1<<24; 3B: 1<<16 */
> > +    uint64_t ht_enable;          /* irqs used in this PIC */
> > +    uint32_t node_id;            /* node id: 0x0-0; 0x1-1; 0x10-2; 0x11-3 */
> > +    uint64_t pci_mem_start_addr;
> > +    uint64_t pci_mem_end_addr;
> > +    uint64_t pci_io_start_addr;
> > +    uint64_t pci_io_end_addr;
> > +    uint64_t pci_config_addr;
> > +    uint16_t dma_mask_bits;
> > +    uint16_t dma_noncoherent;
> > +} __attribute__((packed));
> > +
> > +struct interface_info {
> > +    uint16_t vers;               /* version of the specificition */
> > +    uint16_t size;
> > +    uint8_t  flag;
> > +    char description[64];
> > +} __attribute__((packed));
> > +
> > +#define MAX_RESOURCE_NUMBER 128
> > +struct resource_loongson {
> > +    uint64_t start;              /* resource start address */
> > +    uint64_t end;                /* resource end address */
> > +    char name[64];
> > +    uint32_t flags;
> > +};
> > +
> > +struct archdev_data {};          /* arch specific additions */
> > +
> > +struct board_devices {
> > +    char name[64];               /* hold the device name */
> > +    uint32_t num_resources;      /* number of device_resource */
> > +    /* for each device's resource */
> > +    struct resource_loongson resource[MAX_RESOURCE_NUMBER];
> > +    /* arch specific additions */
> > +    struct archdev_data archdata;
> > +};
> > +
> > +struct loongson_special_attribute {
> > +    uint16_t vers;               /* version of this special */
> > +    char special_name[64];       /* special_atribute_name */
> > +    uint32_t loongson_special_type; /* type of special device */
> > +    /* for each device's resource */
> > +    struct resource_loongson resource[MAX_RESOURCE_NUMBER];
> > +};
> > +
> > +struct loongson_params {
> > +    uint64_t memory_offset;      /* efi_memory_map_loongson struct offset */
> > +    uint64_t cpu_offset;         /* efi_cpuinfo_loongson struct offset */
> > +    uint64_t system_offset;      /* system_loongson struct offset */
> > +    uint64_t irq_offset;         /* irq_source_routing_table struct offset */
> > +    uint64_t interface_offset;   /* interface_info struct offset */
> > +    uint64_t special_offset;     /* loongson_special_attribute struct offset */
> > +    uint64_t boarddev_table_offset;  /* board_devices offset */
> > +};
> > +
> > +struct smbios_tables {
> > +    uint16_t vers;               /* version of smbios */
> > +    uint64_t vga_bios;           /* vga_bios address */
> > +    struct loongson_params lp;
> > +};
> > +
> > +struct efi_reset_system_t {
> > +    uint64_t ResetCold;
> > +    uint64_t ResetWarm;
> > +    uint64_t ResetType;
> > +    uint64_t Shutdown;
> > +    uint64_t DoSuspend; /* NULL if not support */
> > +};
> > +
> > +struct efi_loongson {
> > +    uint64_t mps;                /* MPS table */
> > +    uint64_t acpi;               /* ACPI table (IA64 ext 0.71) */
> > +    uint64_t acpi20;             /* ACPI table (ACPI 2.0) */
> > +    struct smbios_tables smbios; /* SM BIOS table */
> > +    uint64_t sal_systab;         /* SAL system table */
> > +    uint64_t boot_info;          /* boot info table */
> > +};
>
> What about moving most of this declarations in a "loongson_efi.h"
> local header?
OK.

>
> > +
> > +struct boot_params {
> > +    struct efi_loongson efi;
> > +    struct efi_reset_system_t reset_system;
> > +};
> > +
> > +#define LOONGSON_MAX_VCPUS      16
> > +
> > +#define LOONGSON3_BIOSNAME "bios_loongson3.bin"
> > +
> > +#define UART_IRQ            0
> > +#define RTC_IRQ             1
> > +#define PCIE_IRQ_BASE       2
> > +
> > +#define align(x) (((x) + 63) & ~63)
> > +
> > +static const struct MemmapEntry virt_memmap[] = {
> > +    [VIRT_LOWMEM] =      { 0x00000000,    0x10000000 },
> > +    [VIRT_PM] =          { 0x10080000,         0x100 },
> > +    [VIRT_FW_CFG] =      { 0x10080100,         0x100 },
> > +    [VIRT_RTC] =         { 0x10081000,        0x1000 },
> > +    [VIRT_PCIE_PIO] =    { 0x18000000,       0x80000 },
> > +    [VIRT_PCIE_ECAM] =   { 0x1a000000,     0x2000000 },
> > +    [VIRT_BIOS_ROM] =    { 0x1fc00000,      0x200000 },
> > +    [VIRT_UART] =        { 0x1fe001e0,           0x8 },
> > +    [VIRT_LIOINTC] =     { 0x3ff01400,          0x64 },
> > +    [VIRT_PCIE_MMIO] =   { 0x40000000,    0x40000000 },
> > +    [VIRT_HIGHMEM] =     { 0x80000000,           0x0 }, /* Variable */
> > +};
> > +
> > +static const struct MemmapEntry loader_memmap[] = {
> > +    [LOADER_KERNEL] =    { 0x00000000,     0x4000000 },
> > +    [LOADER_INITRD] =    { 0x04000000,           0x0 }, /* Variable */
> > +    [LOADER_CMDLINE] =   { 0x0ff00000,      0x100000 },
> > +};
> > +
> > +static const struct MemmapEntry loader_rommap[] = {
> > +    [LOADER_BOOTROM] =   { 0x1fc00000,        0x1000 },
> > +    [LOADER_PARAM] =     { 0x1fc01000,       0x10000 },
> > +};
> > +
> > +static struct _loaderparams {
> > +    uint64_t cpu_freq;
> > +    uint64_t ram_size;
> > +    const char *kernel_cmdline;
> > +    const char *kernel_filename;
> > +    const char *initrd_filename;
> > +    uint64_t kernel_entry;
> > +    uint64_t a0, a1, a2;
> > +} loaderparams;
> > +
> > +static uint64_t loongson3_pm_read(void *opaque, hwaddr addr, unsigned size)
> > +{
> > +    return 0;
> > +}
> > +
> > +static void loongson3_pm_write(void *opaque, hwaddr addr, uint64_t val, unsigned size)
> > +{
> > +    if (addr != PM_CNTL_MODE) {
> > +        return;
> > +    }
> > +
> > +    switch (val) {
> > +    case 0x00:
> > +        qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
> > +        return;
> > +    case 0xff:
> > +        qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN);
> > +        return;
> > +    default:
> > +        return;
> > +    }
> > +}
> > +
> > +static const MemoryRegionOps loongson3_pm_ops = {
> > +    .read  = loongson3_pm_read,
> > +    .write = loongson3_pm_write,
> > +    .endianness = DEVICE_NATIVE_ENDIAN,
> > +};
> > +
> > +static struct efi_memory_map_loongson *init_memory_map(void *g_map)
> > +{
> > +    struct efi_memory_map_loongson *emap = g_map;
> > +
> > +    emap->nr_map = 2;
> > +    emap->mem_freq = 300000000;
> > +
> > +    emap->map[0].node_id = 0;
> > +    emap->map[0].mem_type = 1;
> > +    emap->map[0].mem_start = 0x0;
> > +    emap->map[0].mem_size = 240;
> > +
> > +    emap->map[1].node_id = 0;
> > +    emap->map[1].mem_type = 2;
> > +    emap->map[1].mem_start = 0x90000000;
> > +    emap->map[1].mem_size = (loaderparams.ram_size / MiB) - 256;
> > +
> > +    return emap;
> > +}
> > +
> > +static uint64_t get_cpu_freq(void)
> > +{
> > +    int ret;
> > +    uint64_t freq;
> > +    struct kvm_one_reg freq_reg = {
> > +        .id = KVM_REG_MIPS_COUNT_HZ,
> > +        .addr = (uintptr_t)(&freq)
> > +    };
> > +
> > +    if (!kvm_enabled()) {
> > +        return 200 * 1000 * 1000;
>
> You earlier commented:
> "Loongson-3 CPU (MIPS64R2 with extensions, 800~2000MHz"
>
> Why not use 800 here?
In target/mips/cp0_timer.cit is said that CP0 timer has "10 ns period
for 100 Mhz frequency", so the CPU frequency should be 200MHz for TCG,
I'll add a comment here.

>
> > +    } else {
> > +        ret = kvm_vcpu_ioctl(first_cpu, KVM_GET_ONE_REG, &freq_reg);
> > +        if (ret < 0) {
> > +            return 1600 * 1000 * 1000;
> > +        }
> > +        return (freq * 2);
> > +    }
> > +}
> > +
> > +static struct efi_cpuinfo_loongson *init_cpu_info(void *g_cpuinfo_loongson)
> > +{
> > +    struct efi_cpuinfo_loongson *c = g_cpuinfo_loongson;
> > +
> > +    c->cputype = Loongson_3A;
> > +    c->processor_id = MIPS_CPU(first_cpu)->env.CP0_PRid;
> > +    if (loaderparams.cpu_freq > UINT_MAX) {
> > +        c->cpu_clock_freq = UINT_MAX;
> > +    } else {
> > +        c->cpu_clock_freq = loaderparams.cpu_freq;
> > +    }
> > +
> > +    c->cpu_startup_core_id = 0;
> > +    c->nr_cpus = current_machine->smp.cpus;
> > +    c->total_node = (current_machine->smp.cpus + 3) / 4;
> > +
> > +    return c;
> > +}
> > +
> > +static struct system_loongson *init_system_loongson(void *g_system)
> > +{
> > +    struct system_loongson *s = g_system;
> > +
> > +    s->ccnuma_smp = 0;
> > +    s->sing_double_channel = 1;
> > +    s->nr_uarts = 1;
> > +    s->uarts[0].iotype = 2;
> > +    s->uarts[0].int_offset = 2;
> > +    s->uarts[0].uartclk = 25000000; /* Random value */
> > +    s->uarts[0].uart_base = virt_memmap[VIRT_UART].base;
> > +
> > +    return s;
> > +}
> > +
> > +static struct irq_source_routing_table *init_irq_source(void *g_irq_source)
> > +{
> > +    struct irq_source_routing_table *irq_info = g_irq_source;
> > +
> > +    irq_info->node_id = 0;
> > +    irq_info->PIC_type = 0;
> > +    irq_info->dma_mask_bits = 64;
> > +    irq_info->pci_mem_start_addr = virt_memmap[VIRT_PCIE_MMIO].base;
> > +    irq_info->pci_mem_end_addr   = virt_memmap[VIRT_PCIE_MMIO].base +
> > +                                   virt_memmap[VIRT_PCIE_MMIO].size - 1;
> > +    irq_info->pci_io_start_addr  = virt_memmap[VIRT_PCIE_PIO].base;
> > +
> > +    return irq_info;
> > +}
> > +
> > +static struct interface_info *init_interface_info(void *g_interface)
> > +{
> > +    struct interface_info *interface = g_interface;
> > +
> > +    interface->vers = 0x01;
> > +    strcpy(interface->description, "UEFI_Version_v1.0");
> > +
> > +    return interface;
> > +}
> > +
> > +static struct board_devices *board_devices_info(void *g_board)
> > +{
> > +    struct board_devices *bd = g_board;
> > +
> > +    strcpy(bd->name, "Loongson-3A-VIRT-1w-V1.00-demo");
> > +
> > +    return bd;
> > +}
> > +
> > +static struct loongson_special_attribute *init_special_info(void *g_special)
> > +{
> > +    struct loongson_special_attribute *special = g_special;
> > +
> > +    strcpy(special->special_name, "2017-05-01");
>
> strpadcpy?
OK.

>
> > +
> > +    return special;
> > +}
> > +
> > +static void init_loongson_params(struct loongson_params *lp, void *p)
> > +{
> > +    lp->memory_offset = (unsigned long long)init_memory_map(p)
> > +                        - (unsigned long long)lp;
> > +    p += align(sizeof(struct efi_memory_map_loongson));
>
>        p += ROUND_UP(sizeof(struct efi_memory_map_loongson), 64);
>
> or use QEMU_ALIGN_PTR_UP()?
OK, I'll use ROUND_UP().

>
> > +
> > +    lp->cpu_offset = (unsigned long long)init_cpu_info(p)
> > +                     - (unsigned long long)lp;
> > +    p += align(sizeof(struct efi_cpuinfo_loongson));
> > +
> > +    lp->system_offset = (unsigned long long)init_system_loongson(p)
> > +                        - (unsigned long long)lp;
> > +    p += align(sizeof(struct system_loongson));
> > +
> > +    lp->irq_offset = (unsigned long long)init_irq_source(p)
> > +                     - (unsigned long long)lp;
> > +    p += align(sizeof(struct irq_source_routing_table));
> > +
> > +    lp->interface_offset = (unsigned long long)init_interface_info(p)
> > +                           - (unsigned long long)lp;
> > +    p += align(sizeof(struct interface_info));
> > +
> > +    lp->boarddev_table_offset = (unsigned long long)board_devices_info(p)
> > +                                - (unsigned long long)lp;
> > +    p += align(sizeof(struct board_devices));
> > +
> > +    lp->special_offset = (unsigned long long)init_special_info(p)
> > +                         - (unsigned long long)lp;
> > +    p += align(sizeof(struct loongson_special_attribute));
> > +}
> > +
> > +static void init_reset_system(struct efi_reset_system_t *reset)
> > +{
> > +    reset->Shutdown = 0xffffffffbfc000a8;
> > +    reset->ResetCold = 0xffffffffbfc00080;
> > +    reset->ResetWarm = 0xffffffffbfc00080;
> > +}
> > +
> > +static void init_boot_param(void)
> > +{
> > +    void *p;
> > +    struct boot_params *bp;
> > +
> > +    p = g_malloc0(loader_rommap[LOADER_PARAM].size);
> > +    bp = p;
> > +
> > +    bp->efi.smbios.vers = 1;
> > +    init_reset_system(&(bp->reset_system));
> > +    p += align(sizeof(struct boot_params));
> > +    init_loongson_params(&(bp->efi.smbios.lp), p);
> > +
> > +    rom_add_blob_fixed("params_rom", bp,
> > +                       loader_rommap[LOADER_PARAM].size,
> > +                       loader_rommap[LOADER_PARAM].base);
> > +
> > +    g_free(bp);
> > +
> > +    loaderparams.a2 = cpu_mips_phys_to_kseg0(NULL,
> > +                                             loader_rommap[LOADER_PARAM].base);
> > +}
> > +
> > +static void init_boot_rom(void)
> > +{
> > +    const unsigned int boot_code[] = {
> > +        0x40086000,   /* mfc0    t0, CP0_STATUS                               */
> > +        0x240900E4,   /* li      t1, 0xe4         #set kx, sx, ux, erl        */
> > +        0x01094025,   /* or      t0, t0, t1                                   */
> > +        0x3C090040,   /* lui     t1, 0x40         #set bev                    */
> > +        0x01094025,   /* or      t0, t0, t1                                   */
> > +        0x40886000,   /* mtc0    t0, CP0_STATUS                               */
> > +        0x00000000,
> > +        0x40806800,   /* mtc0    zero, CP0_CAUSE                              */
> > +        0x00000000,
> > +        0x400A7801,   /* mfc0    t2, $15, 1                                   */
> > +        0x314A00FF,   /* andi    t2, 0x0ff                                    */
> > +        0x3C089000,   /* dli     t0, 0x900000003ff01000                       */
> > +        0x00084438,
> > +        0x35083FF0,
> > +        0x00084438,
> > +        0x35081000,
> > +        0x314B0003,   /* andi    t3, t2, 0x3      #local cpuid                */
> > +        0x000B5A00,   /* sll     t3, 8                                        */
> > +        0x010B4025,   /* or      t0, t0, t3                                   */
> > +        0x314C000C,   /* andi    t4, t2, 0xc      #node id                    */
> > +        0x000C62BC,   /* dsll    t4, 42                                       */
> > +        0x010C4025,   /* or      t0, t0, t4                                   */
> > +                      /* WaitForInit:                                         */
> > +        0xDD020020,   /* ld      v0, FN_OFF(t0)   #FN_OFF 0x020               */
> > +        0x1040FFFE,   /* beqz    v0, WaitForInit                              */
> > +        0x00000000,   /* nop                                                  */
> > +        0xDD1D0028,   /* ld      sp, SP_OFF(t0)   #FN_OFF 0x028               */
> > +        0xDD1C0030,   /* ld      gp, GP_OFF(t0)   #FN_OFF 0x030               */
> > +        0xDD050038,   /* ld      a1, A1_OFF(t0)   #FN_OFF 0x038               */
> > +        0x00400008,   /* jr      v0               #byebye                     */
> > +        0x00000000,   /* nop                                                  */
> > +        0x1000FFFF,   /* 1:  b   1b                                           */
> > +        0x00000000,   /* nop                                                  */
> > +
> > +                      /* Reset                                                */
> > +        0x3C0C9000,   /* dli     t0, 0x9000000010080010                       */
> > +        0x358C0000,
> > +        0x000C6438,
> > +        0x358C1008,
> > +        0x000C6438,
> > +        0x358C0010,
> > +        0x240D0000,   /* li      t1, 0x00                                     */
> > +        0xA18D0000,   /* sb      t1, (t0)                                     */
> > +        0x1000FFFF,   /* 1:  b   1b                                           */
> > +        0x00000000,   /* nop                                                  */
> > +
> > +                      /* Shutdown                                             */
> > +        0x3C0C9000,   /* dli     t0, 0x9000000010080010                       */
> > +        0x358C0000,
> > +        0x000C6438,
> > +        0x358C1008,
> > +        0x000C6438,
> > +        0x358C0010,
> > +        0x240D00FF,   /* li      t1, 0xff                                     */
> > +        0xA18D0000,   /* sb      t1, (t0)                                     */
> > +        0x1000FFFF,   /* 1:  b   1b                                           */
> > +        0x00000000    /* nop                                                  */
> > +    };
> > +
> > +    rom_add_blob_fixed("boot_rom", boot_code, sizeof(boot_code),
> > +                        loader_rommap[LOADER_BOOTROM].base);
> > +}
> > +
> > +static void fw_cfg_boot_set(void *opaque, const char *boot_device,
> > +                            Error **errp)
> > +{
> > +    fw_cfg_modify_i16(opaque, FW_CFG_BOOT_DEVICE, boot_device[0]);
> > +}
> > +
> > +static void fw_conf_init(unsigned long ram_size)
> > +{
> > +    FWCfgState *fw_cfg;
> > +    hwaddr cfg_addr = virt_memmap[VIRT_FW_CFG].base;
> > +
> > +    fw_cfg = fw_cfg_init_mem_wide(cfg_addr, cfg_addr + 8, 8, 0, NULL);
> > +    fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, (uint16_t)current_machine->smp.cpus);
> > +    fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)current_machine->smp.max_cpus);
> > +    fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
> > +    fw_cfg_add_i32(fw_cfg, FW_CFG_MACHINE_VERSION, 1);
> > +    fw_cfg_add_i64(fw_cfg, FW_CFG_CPU_FREQ, get_cpu_freq());
> > +    qemu_register_boot_set(fw_cfg_boot_set, fw_cfg);
> > +}
> > +
> > +static int set_prom_cmdline(ram_addr_t initrd_offset, long initrd_size)
> > +{
> > +    hwaddr cmdline_vaddr;
> > +    char memenv[32];
> > +    char highmemenv[32];
> > +    void *cmdline_buf;
> > +    unsigned int *parg_env;
> > +    int ret = 0;
> > +
> > +    /* Allocate cmdline_buf for command line. */
> > +    cmdline_buf = g_malloc0(loader_memmap[LOADER_CMDLINE].size);
> > +    cmdline_vaddr = cpu_mips_phys_to_kseg0(NULL,
> > +                                           loader_memmap[LOADER_CMDLINE].base);
> > +
> > +    /*
> > +     * Layout of cmdline_buf looks like this:
> > +     * argv[0], argv[1], 0, env[0], env[1], ... env[i], 0,
> > +     * argv[0]'s data, argv[1]'s data, env[0]'data, ..., env[i]'s data, 0
> > +     */
> > +    parg_env = (void *)cmdline_buf;
> > +
> > +    ret = (3 + 1) * 4;
> > +    *parg_env++ = cmdline_vaddr + ret;
> > +    ret += (1 + snprintf(cmdline_buf + ret, 256 - ret, "g"));
> > +
> > +    /* argv1 */
> > +    *parg_env++ = cmdline_vaddr + ret;
> > +    if (initrd_size > 0)
> > +        ret += (1 + snprintf(cmdline_buf + ret, 256 - ret,
> > +                "rd_start=0x" TARGET_FMT_lx " rd_size=%li %s",
> > +                cpu_mips_phys_to_kseg0(NULL, initrd_offset),
> > +                initrd_size, loaderparams.kernel_cmdline));
> > +    else
> > +        ret += (1 + snprintf(cmdline_buf + ret, 256 - ret, "%s",
> > +                loaderparams.kernel_cmdline));
> > +
> > +    /* argv2 */
> > +    *parg_env++ = cmdline_vaddr + 4 * ret;
> > +
> > +    /* env */
> > +    sprintf(memenv, "%ld", loaderparams.ram_size > 0x10000000
> > +            ? 256 : (loaderparams.ram_size >> 20));
>
> Please use 256 * MiB and MiB.
OK.

>
> (I'm not sure why you check this, since you enforce 512M min).
>
> > +    sprintf(highmemenv, "%ld", loaderparams.ram_size > 0x10000000
> > +            ? (loaderparams.ram_size >> 20) - 256 : 0);
> > +
> > +    rom_add_blob_fixed("cmdline", cmdline_buf,
> > +                       loader_memmap[LOADER_CMDLINE].size,
> > +                       loader_memmap[LOADER_CMDLINE].base);
> > +
> > +    g_free(cmdline_buf);
> > +
> > +    loaderparams.a0 = 2;
> > +    loaderparams.a1 = cmdline_vaddr;
> > +
> > +    return 0;
> > +}
> > +
> > +static uint64_t load_kernel(CPUMIPSState *env)
> > +{
> > +    long kernel_size;
> > +    ram_addr_t initrd_offset;
> > +    uint64_t kernel_entry, kernel_low, kernel_high, initrd_size;
> > +
> > +    kernel_size = load_elf(loaderparams.kernel_filename, NULL,
> > +                           cpu_mips_kseg0_to_phys, NULL,
> > +                           (uint64_t *)&kernel_entry,
> > +                           (uint64_t *)&kernel_low, (uint64_t *)&kernel_high,
> > +                           NULL, 0, EM_MIPS, 1, 0);
> > +    if (kernel_size < 0) {
> > +        error_report("could not load kernel '%s': %s",
> > +                     loaderparams.kernel_filename,
> > +                     load_elf_strerror(kernel_size));
> > +        exit(1);
> > +    }
> > +
> > +    /* load initrd */
> > +    initrd_size = 0;
> > +    initrd_offset = 0;
> > +    if (loaderparams.initrd_filename) {
> > +        initrd_size = get_image_size(loaderparams.initrd_filename);
> > +        if (initrd_size > 0) {
> > +            initrd_offset = (kernel_high + ~INITRD_PAGE_MASK) &
> > +                            INITRD_PAGE_MASK;
> > +            initrd_offset = MAX(initrd_offset,
> > +                                loader_memmap[LOADER_INITRD].base);
> > +
> > +            if (initrd_offset + initrd_size > ram_size) {
> > +                error_report("memory too small for initial ram disk '%s'",
> > +                             loaderparams.initrd_filename);
> > +                exit(1);
> > +            }
> > +
> > +            initrd_size = load_image_targphys(loaderparams.initrd_filename,
> > +                                              initrd_offset,
> > +                                              ram_size - initrd_offset);
> > +        }
> > +
> > +        if (initrd_size == (target_ulong) -1) {
> > +            error_report("could not load initial ram disk '%s'",
> > +                         loaderparams.initrd_filename);
> > +            exit(1);
> > +        }
> > +    }
> > +
> > +    /* Setup prom cmdline. */
> > +    set_prom_cmdline(initrd_offset, initrd_size);
> > +
> > +    return kernel_entry;
> > +}
> > +
> > +static void main_cpu_reset(void *opaque)
> > +{
> > +    MIPSCPU *cpu = opaque;
> > +    CPUMIPSState *env = &cpu->env;
> > +
> > +    cpu_reset(CPU(cpu));
> > +
> > +    /* Loongson-3 reset stuff */
> > +    if (loaderparams.kernel_filename) {
> > +        if (cpu == MIPS_CPU(first_cpu)) {
> > +            env->active_tc.gpr[4] = loaderparams.a0;
> > +            env->active_tc.gpr[5] = loaderparams.a1;
> > +            env->active_tc.gpr[6] = loaderparams.a2;
> > +            env->active_tc.PC = loaderparams.kernel_entry;
> > +        }
> > +        env->CP0_Status &= ~((1 << CP0St_BEV) | (1 << CP0St_ERL));
> > +    }
> > +}
> > +
> > +static inline void loongson3_virt_devices_init(MachineState *machine, DeviceState *pic)
> > +{
> > +    int i;
> > +    qemu_irq irq;
> > +    PCIBus *pci_bus;
> > +    DeviceState *dev;
> > +    MemoryRegion *pio_alias;
> > +    MemoryRegion *mmio_alias, *mmio_reg;
> > +    MemoryRegion *ecam_alias, *ecam_reg;
> > +
> > +    dev = qdev_new(TYPE_GPEX_HOST);
> > +    sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
> > +    pci_bus = PCI_HOST_BRIDGE(dev)->bus;
> > +
> > +    ecam_alias = g_new0(MemoryRegion, 1);
> > +    ecam_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0);
> > +    memory_region_init_alias(ecam_alias, OBJECT(dev), "pcie-ecam",
> > +                             ecam_reg, 0, virt_memmap[VIRT_PCIE_ECAM].size);
> > +    memory_region_add_subregion(get_system_memory(),
> > +                                virt_memmap[VIRT_PCIE_ECAM].base, ecam_alias);
> > +
> > +    mmio_alias = g_new0(MemoryRegion, 1);
> > +    mmio_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 1);
> > +    memory_region_init_alias(mmio_alias, OBJECT(dev), "pcie-mmio",
> > +                             mmio_reg, virt_memmap[VIRT_PCIE_MMIO].base,
> > +                             virt_memmap[VIRT_PCIE_MMIO].size);
> > +    memory_region_add_subregion(get_system_memory(),
> > +                                virt_memmap[VIRT_PCIE_MMIO].base, mmio_alias);
> > +
> > +    pio_alias = g_new0(MemoryRegion, 1);
> > +    memory_region_init_alias(pio_alias, OBJECT(dev), "pcie-pio",
> > +                             get_system_io(), 0, virt_memmap[VIRT_PCIE_PIO].size);
> > +    memory_region_add_subregion(get_system_memory(),
> > +                                virt_memmap[VIRT_PCIE_PIO].base, pio_alias);
> > +    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 2, virt_memmap[VIRT_PCIE_PIO].base);
> > +
> > +    for (i = 0; i < GPEX_NUM_IRQS; i++) {
> > +        irq = qdev_get_gpio_in(pic, PCIE_IRQ_BASE + i);
> > +        sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, irq);
> > +        gpex_set_irq_num(GPEX_HOST(dev), i, PCIE_IRQ_BASE + i);
> > +    }
> > +
> > +    pci_vga_init(pci_bus);
> > +
> > +    if (defaults_enabled()) {
> > +        pci_create_simple(pci_bus, -1, "pci-ohci");
> > +        usb_create_simple(usb_bus_find(-1), "usb-kbd");
> > +        usb_create_simple(usb_bus_find(-1), "usb-tablet");
> > +    }
> > +
> > +    for (i = 0; i < nb_nics; i++) {
> > +        NICInfo *nd = &nd_table[i];
> > +
> > +        if (!nd->model) {
> > +            nd->model = g_strdup("virtio");
> > +        }
> > +
> > +        pci_nic_init_nofail(nd, pci_bus, nd->model, NULL);
> > +    }
> > +}
> > +
> > +static void mips_loongson3_virt_init(MachineState *machine)
> > +{
> > +    int i;
> > +    long bios_size;
> > +    MIPSCPU *cpu;
> > +    CPUMIPSState *env;
> > +    DeviceState *liointc;
> > +    char *filename;
> > +    const char *kernel_cmdline = machine->kernel_cmdline;
> > +    const char *kernel_filename = machine->kernel_filename;
> > +    const char *initrd_filename = machine->initrd_filename;
> > +    ram_addr_t ram_size = machine->ram_size;
> > +    MemoryRegion *address_space_mem = get_system_memory();
> > +    MemoryRegion *ram = g_new(MemoryRegion, 1);
> > +    MemoryRegion *bios = g_new(MemoryRegion, 1);
> > +    MemoryRegion *iomem = g_new(MemoryRegion, 1);
> > +
> > +    /* TODO: TCG will support all CPU types */
> > +    if (!kvm_enabled()) {
> > +        if (!machine->cpu_type) {
> > +            machine->cpu_type = MIPS_CPU_TYPE_NAME("Loongson-3A1000");
> > +        }
> > +        if (!strstr(machine->cpu_type, "Loongson-3A1000")) {
> > +            error_report("Loongson-3/TCG need cpu type Loongson-3A1000");
> > +            exit(1);
> > +        }
> > +    } else {
> > +        if (!machine->cpu_type) {
> > +            machine->cpu_type = MIPS_CPU_TYPE_NAME("Loongson-3A4000");
> > +        }
> > +        if (!strstr(machine->cpu_type, "Loongson-3A4000")) {
> > +            error_report("Loongson-3/KVM need cpu type Loongson-3A4000");
> > +            exit(1);
> > +        }
> > +    }
> > +
> > +    if (ram_size < 512 * MiB) {
> > +        error_report("Loongson-3 need at least 512MB memory");
>
> Typo "needs", but why?
Though you told me "QEMU shouldn't assume anything about the guest",
but Loongson-3 machine really need at least 512M memory. And as you
said, this can simplify the memsize/highmemsize process (always larger
than 256).

>
> > +        exit(1);
> > +    }
> > +
> > +    /*
> > +     * The whole MMIO range among configure registers doesn't generate
> > +     * exception when accessing invalid memory. Create an empty slot to
> > +     * emulate this feature.
> > +     */
> > +    empty_slot_init("fallback", 0, 0x80000000);
>
> Again, this doesn't look correct (no comment in my previous review).
This is written by Jiaxun because this is only needed by TCG, and he
said that malta also uses empty_slot_init() here.

>
> > +
> > +    liointc = qdev_new("loongson.liointc");
> > +    sysbus_realize_and_unref(SYS_BUS_DEVICE(liointc), &error_fatal);
> > +
> > +    sysbus_mmio_map(SYS_BUS_DEVICE(liointc), 0, virt_memmap[VIRT_LIOINTC].base);
> > +
> > +    for (i = 0; i < machine->smp.cpus; i++) {
> > +        int ip;
> > +
> > +        /* init CPUs */
> > +        cpu = MIPS_CPU(cpu_create(machine->cpu_type));
> > +
> > +        /* Init internal devices */
> > +        cpu_mips_irq_init_cpu(cpu);
> > +        cpu_mips_clock_init(cpu);
> > +        qemu_register_reset(main_cpu_reset, cpu);
> > +
> > +        if (i >= 4) {
> > +            continue; /* Only node-0 can be connected to LIOINTC */
> > +        }
> > +
> > +        for (ip = 0; ip < 4 ; ip++) {
> > +            int pin = i * 4 + ip;
> > +            sysbus_connect_irq(SYS_BUS_DEVICE(liointc),
> > +                               pin, cpu->env.irq[ip + 2]);
> > +        }
> > +    }
> > +    env = &MIPS_CPU(first_cpu)->env;
> > +
> > +    /* Allocate RAM/BIOS, 0x00000000~0x10000000 is alias of 0x80000000~0x90000000 */
> > +    memory_region_init_rom(bios, NULL, "loongson3.bios",
> > +                           virt_memmap[VIRT_BIOS_ROM].size, &error_fatal);
> > +    memory_region_init_alias(ram, NULL, "loongson3.lowmem",
> > +                           machine->ram, 0, virt_memmap[VIRT_LOWMEM].size);
> > +    memory_region_init_io(iomem, NULL, &loongson3_pm_ops,
> > +                           NULL, "loongson3_pm", virt_memmap[VIRT_PM].size);
> > +
> > +    memory_region_add_subregion(address_space_mem,
> > +                      virt_memmap[VIRT_LOWMEM].base, ram);
> > +    memory_region_add_subregion(address_space_mem,
> > +                      virt_memmap[VIRT_BIOS_ROM].base, bios);
> > +    memory_region_add_subregion(address_space_mem,
> > +                      virt_memmap[VIRT_HIGHMEM].base, machine->ram);
> > +    memory_region_add_subregion(address_space_mem,
> > +                      virt_memmap[VIRT_PM].base, iomem);
> > +
> > +    /*
> > +     * We do not support flash operation, just loading bios.bin as raw BIOS.
> > +     * Please use -L to set the BIOS path and -bios to set bios name.
> > +     */
> > +
> > +    if (kernel_filename) {
> > +        loaderparams.cpu_freq = get_cpu_freq();
> > +        loaderparams.ram_size = ram_size;
> > +        loaderparams.kernel_filename = kernel_filename;
> > +        loaderparams.kernel_cmdline = kernel_cmdline;
> > +        loaderparams.initrd_filename = initrd_filename;
> > +        loaderparams.kernel_entry = load_kernel(env);
> > +
> > +        init_boot_rom();
> > +        init_boot_param();
> > +    } else {
> > +        if (bios_name == NULL) {
> > +                bios_name = LOONGSON3_BIOSNAME;
> > +        }
> > +        filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
> > +        if (filename) {
> > +            bios_size = load_image_targphys(filename,
> > +                                            virt_memmap[VIRT_BIOS_ROM].base,
> > +                                            virt_memmap[VIRT_BIOS_ROM].size);
> > +            g_free(filename);
> > +        } else {
> > +            bios_size = -1;
> > +        }
> > +
> > +        if ((bios_size < 0 || bios_size > virt_memmap[VIRT_BIOS_ROM].size) &&
> > +            !kernel_filename && !qtest_enabled()) {
> > +            error_report("Could not load MIPS bios '%s'", bios_name);
> > +            exit(1);
> > +        }
> > +
> > +        fw_conf_init(ram_size);
> > +    }
> > +
> > +    msi_nonbroken = true;
> > +    loongson3_virt_devices_init(machine, liointc);
> > +
> > +    sysbus_create_simple("goldfish_rtc", virt_memmap[VIRT_RTC].base,
> > +                         qdev_get_gpio_in(liointc, RTC_IRQ));
> > +
> > +    serial_mm_init(address_space_mem, virt_memmap[VIRT_UART].base, 0,
> > +                   qdev_get_gpio_in(liointc, UART_IRQ), 115200, serial_hd(0),
> > +                   DEVICE_NATIVE_ENDIAN);
> > +}
> > +
> > +static void mips_loongson3_virt_machine_init(MachineClass *mc)
> > +{
> > +    mc->desc = "Loongson-3 Virtualization Platform";
> > +    mc->init = mips_loongson3_virt_init;
> > +    mc->block_default_type = IF_IDE;
> > +    mc->max_cpus = LOONGSON_MAX_VCPUS;
> > +    mc->default_ram_id = "loongson3.highram";
> > +    mc->default_ram_size = 1600 * MiB;
> > +    mc->kvm_type = mips_kvm_type;
> > +    mc->minimum_page_bits = 14;
> > +}
> > +
> > +DEFINE_MACHINE("loongson3-virt", mips_loongson3_virt_machine_init)
> > diff --git a/hw/mips/meson.build b/hw/mips/meson.build
> > index 46294b7..32c8b95 100644
> > --- a/hw/mips/meson.build
> > +++ b/hw/mips/meson.build
> > @@ -1,6 +1,7 @@
> >  mips_ss = ss.source_set()
> > -mips_ss.add(files('addr.c', 'mips_int.c'))
> > +mips_ss.add(files('addr.c', 'mips_int.c', 'fw_cfg.c'))
> >  mips_ss.add(when: 'CONFIG_FULOONG', if_true: files('fuloong2e.c'))
> > +mips_ss.add(when: 'CONFIG_LOONGSON3V', if_true: files('loongson3_virt.c'))
> >  mips_ss.add(when: 'CONFIG_JAZZ', if_true: files('jazz.c'))
> >  mips_ss.add(when: 'CONFIG_MALTA', if_true: files('gt64xxx_pci.c', 'malta.c'))
> >  mips_ss.add(when: 'CONFIG_MIPSSIM', if_true: files('mipssim.c'))
> >
Philippe Mathieu-Daudé Sept. 16, 2020, 10:47 a.m. UTC | #4
On 9/16/20 11:49 AM, Huacai Chen wrote:
> On Wed, Sep 16, 2020 at 3:56 PM Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
>> On 9/16/20 4:12 AM, Huacai Chen wrote:
[...]
>>> +static void mips_loongson3_virt_init(MachineState *machine)
>>> +{
>>> +    int i;
>>> +    long bios_size;
>>> +    MIPSCPU *cpu;
>>> +    CPUMIPSState *env;
>>> +    DeviceState *liointc;
>>> +    char *filename;
>>> +    const char *kernel_cmdline = machine->kernel_cmdline;
>>> +    const char *kernel_filename = machine->kernel_filename;
>>> +    const char *initrd_filename = machine->initrd_filename;
>>> +    ram_addr_t ram_size = machine->ram_size;
>>> +    MemoryRegion *address_space_mem = get_system_memory();
>>> +    MemoryRegion *ram = g_new(MemoryRegion, 1);
>>> +    MemoryRegion *bios = g_new(MemoryRegion, 1);
>>> +    MemoryRegion *iomem = g_new(MemoryRegion, 1);
>>> +
>>> +    /* TODO: TCG will support all CPU types */
>>> +    if (!kvm_enabled()) {
>>> +        if (!machine->cpu_type) {
>>> +            machine->cpu_type = MIPS_CPU_TYPE_NAME("Loongson-3A1000");
>>> +        }
>>> +        if (!strstr(machine->cpu_type, "Loongson-3A1000")) {
>>> +            error_report("Loongson-3/TCG need cpu type Loongson-3A1000");
>>> +            exit(1);
>>> +        }
>>> +    } else {
>>> +        if (!machine->cpu_type) {
>>> +            machine->cpu_type = MIPS_CPU_TYPE_NAME("Loongson-3A4000");
>>> +        }
>>> +        if (!strstr(machine->cpu_type, "Loongson-3A4000")) {
>>> +            error_report("Loongson-3/KVM need cpu type Loongson-3A4000");
>>> +            exit(1);
>>> +        }
>>> +    }
>>> +
>>> +    if (ram_size < 512 * MiB) {
>>> +        error_report("Loongson-3 need at least 512MB memory");
>>
>> Typo "needs", but why?
> Though you told me "QEMU shouldn't assume anything about the guest",
> but Loongson-3 machine really need at least 512M memory. And as you
> said, this can simplify the memsize/highmemsize process (always larger
> than 256).

OK, that's fine.

> 
>>
>>> +        exit(1);
>>> +    }
>>> +
>>> +    /*
>>> +     * The whole MMIO range among configure registers doesn't generate
>>> +     * exception when accessing invalid memory. Create an empty slot to
>>> +     * emulate this feature.
>>> +     */
>>> +    empty_slot_init("fallback", 0, 0x80000000);
>>
>> Again, this doesn't look correct (no comment in my previous review).
> This is written by Jiaxun because this is only needed by TCG, and he
> said that malta also uses empty_slot_init() here.

IIRC for Malta this is a GT64120 specific hole.

In this case I'd like to know the justification first.
Maybe you want to add this hole in the LOONGSON_LIOINTC device...

> 
>>
>>> +
>>> +    liointc = qdev_new("loongson.liointc");
>>> +    sysbus_realize_and_unref(SYS_BUS_DEVICE(liointc), &error_fatal);
>>> +
>>> +    sysbus_mmio_map(SYS_BUS_DEVICE(liointc), 0, virt_memmap[VIRT_LIOINTC].base);
>>> +
>>> +    for (i = 0; i < machine->smp.cpus; i++) {
>>> +        int ip;
>>> +
>>> +        /* init CPUs */
>>> +        cpu = MIPS_CPU(cpu_create(machine->cpu_type));
>>> +
>>> +        /* Init internal devices */
>>> +        cpu_mips_irq_init_cpu(cpu);
>>> +        cpu_mips_clock_init(cpu);
>>> +        qemu_register_reset(main_cpu_reset, cpu);
>>> +
>>> +        if (i >= 4) {
>>> +            continue; /* Only node-0 can be connected to LIOINTC */
>>> +        }
>>> +
>>> +        for (ip = 0; ip < 4 ; ip++) {
>>> +            int pin = i * 4 + ip;
>>> +            sysbus_connect_irq(SYS_BUS_DEVICE(liointc),
>>> +                               pin, cpu->env.irq[ip + 2]);
>>> +        }
>>> +    }
>>> +    env = &MIPS_CPU(first_cpu)->env;
>>> +
>>> +    /* Allocate RAM/BIOS, 0x00000000~0x10000000 is alias of 0x80000000~0x90000000 */
>>> +    memory_region_init_rom(bios, NULL, "loongson3.bios",
>>> +                           virt_memmap[VIRT_BIOS_ROM].size, &error_fatal);
>>> +    memory_region_init_alias(ram, NULL, "loongson3.lowmem",
>>> +                           machine->ram, 0, virt_memmap[VIRT_LOWMEM].size);
>>> +    memory_region_init_io(iomem, NULL, &loongson3_pm_ops,
>>> +                           NULL, "loongson3_pm", virt_memmap[VIRT_PM].size);
>>> +
>>> +    memory_region_add_subregion(address_space_mem,
>>> +                      virt_memmap[VIRT_LOWMEM].base, ram);
>>> +    memory_region_add_subregion(address_space_mem,
>>> +                      virt_memmap[VIRT_BIOS_ROM].base, bios);
>>> +    memory_region_add_subregion(address_space_mem,
>>> +                      virt_memmap[VIRT_HIGHMEM].base, machine->ram);
>>> +    memory_region_add_subregion(address_space_mem,
>>> +                      virt_memmap[VIRT_PM].base, iomem);
>>> +
[...]
Philippe Mathieu-Daudé Sept. 17, 2020, 7:53 a.m. UTC | #5
On 9/16/20 12:47 PM, Philippe Mathieu-Daudé wrote:
> On 9/16/20 11:49 AM, Huacai Chen wrote:

>> On Wed, Sep 16, 2020 at 3:56 PM Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:

>>> On 9/16/20 4:12 AM, Huacai Chen wrote:

> [...]

>>>> +static void mips_loongson3_virt_init(MachineState *machine)

>>>> +{

>>>> +    int i;

>>>> +    long bios_size;

>>>> +    MIPSCPU *cpu;

>>>> +    CPUMIPSState *env;

>>>> +    DeviceState *liointc;

>>>> +    char *filename;

>>>> +    const char *kernel_cmdline = machine->kernel_cmdline;

>>>> +    const char *kernel_filename = machine->kernel_filename;

>>>> +    const char *initrd_filename = machine->initrd_filename;

>>>> +    ram_addr_t ram_size = machine->ram_size;

>>>> +    MemoryRegion *address_space_mem = get_system_memory();

>>>> +    MemoryRegion *ram = g_new(MemoryRegion, 1);

>>>> +    MemoryRegion *bios = g_new(MemoryRegion, 1);

>>>> +    MemoryRegion *iomem = g_new(MemoryRegion, 1);

>>>> +

>>>> +    /* TODO: TCG will support all CPU types */

>>>> +    if (!kvm_enabled()) {

>>>> +        if (!machine->cpu_type) {

>>>> +            machine->cpu_type = MIPS_CPU_TYPE_NAME("Loongson-3A1000");

>>>> +        }

>>>> +        if (!strstr(machine->cpu_type, "Loongson-3A1000")) {

>>>> +            error_report("Loongson-3/TCG need cpu type Loongson-3A1000");

>>>> +            exit(1);

>>>> +        }

>>>> +    } else {

>>>> +        if (!machine->cpu_type) {

>>>> +            machine->cpu_type = MIPS_CPU_TYPE_NAME("Loongson-3A4000");

>>>> +        }

>>>> +        if (!strstr(machine->cpu_type, "Loongson-3A4000")) {

>>>> +            error_report("Loongson-3/KVM need cpu type Loongson-3A4000");

>>>> +            exit(1);

>>>> +        }

>>>> +    }

>>>> +

>>>> +    if (ram_size < 512 * MiB) {

>>>> +        error_report("Loongson-3 need at least 512MB memory");

>>>

>>> Typo "needs", but why?

>> Though you told me "QEMU shouldn't assume anything about the guest",

>> but Loongson-3 machine really need at least 512M memory. And as you

>> said, this can simplify the memsize/highmemsize process (always larger

>> than 256).

> 

> OK, that's fine.

> 

>>

>>>

>>>> +        exit(1);

>>>> +    }

>>>> +

>>>> +    /*

>>>> +     * The whole MMIO range among configure registers doesn't generate

>>>> +     * exception when accessing invalid memory. Create an empty slot to

>>>> +     * emulate this feature.

>>>> +     */

>>>> +    empty_slot_init("fallback", 0, 0x80000000);

>>>

>>> Again, this doesn't look correct (no comment in my previous review).

>> This is written by Jiaxun because this is only needed by TCG, and he

>> said that malta also uses empty_slot_init() here.

> 

> IIRC for Malta this is a GT64120 specific hole.

> 

> In this case I'd like to know the justification first.

> Maybe you want to add this hole in the LOONGSON_LIOINTC device...


Which makes me also wonder why are you splitting out 256MB of the RAM?

This was a physical restriction of the GT64120 on 32-bit targets.
Your hardware is virtual and 64-bit...
Philippe Mathieu-Daudé Sept. 17, 2020, 8:09 a.m. UTC | #6
On 9/16/20 11:49 AM, Huacai Chen wrote:
>>> We now already have a full functional Linux kernel (based on Linux-5.4.x
>>> LTS, the kvm host side and guest side have both been upstream for Linux-
>>> 5.9, but Linux-5.9 has not been released yet) here:
>>>
>>> https://github.com/chenhuacai/linux
>>>
>>> Of course the upstream kernel is also usable (though it is "unstable"
>>> now):
>>>
>>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
>>>
>>> How to use QEMU/Loongson-3?
>>> 1, Download kernel source from the above URL;
>>> 2, Build a kernel with arch/mips/configs/loongson3_defconfig;
>>> 3, Boot a Loongson-3A4000 host with this kernel (for KVM mode);
>>> 4, Build QEMU-master with this patchset;
>>
>> Which produces all the following errors:
>>
>> hw/mips/loongson3_virt.c: In function 'get_cpu_freq':
>> hw/mips/loongson3_virt.c:372:12: error: variable 'freq_reg' has
>> initializer but incomplete type
>>      struct kvm_one_reg freq_reg = {
>>             ^
>> hw/mips/loongson3_virt.c:373:9: error: unknown field 'id' specified in
>> initializer
>>          .id = KVM_REG_MIPS_COUNT_HZ,
>>          ^
>> hw/mips/loongson3_virt.c:373:15: error: 'KVM_REG_MIPS_COUNT_HZ'
>> undeclared (first use in this function)
>>          .id = KVM_REG_MIPS_COUNT_HZ,
>>                ^
> I don't know how to reproduce these errors, struct kvm_one_reg and
> KVM_REG_MIPS_COUNT_HZ are both defined..., could you please tell me?
> My build steps are like this:
> mkdir build
> cd build
> ../configure
> make

Building on Ubuntu 20.04.

C compiler for the host machine: cc (gcc 9.3.0 "cc (Ubuntu
9.3.0-10ubuntu2) 9.3.0")
C linker for the host machine: cc ld.bfd 2.34
Huacai Chen Sept. 19, 2020, 1 a.m. UTC | #7
Hi, Philippe,

On Thu, Sep 17, 2020 at 3:53 PM Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
>
> On 9/16/20 12:47 PM, Philippe Mathieu-Daudé wrote:
> > On 9/16/20 11:49 AM, Huacai Chen wrote:
> >> On Wed, Sep 16, 2020 at 3:56 PM Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
> >>> On 9/16/20 4:12 AM, Huacai Chen wrote:
> > [...]
> >>>> +static void mips_loongson3_virt_init(MachineState *machine)
> >>>> +{
> >>>> +    int i;
> >>>> +    long bios_size;
> >>>> +    MIPSCPU *cpu;
> >>>> +    CPUMIPSState *env;
> >>>> +    DeviceState *liointc;
> >>>> +    char *filename;
> >>>> +    const char *kernel_cmdline = machine->kernel_cmdline;
> >>>> +    const char *kernel_filename = machine->kernel_filename;
> >>>> +    const char *initrd_filename = machine->initrd_filename;
> >>>> +    ram_addr_t ram_size = machine->ram_size;
> >>>> +    MemoryRegion *address_space_mem = get_system_memory();
> >>>> +    MemoryRegion *ram = g_new(MemoryRegion, 1);
> >>>> +    MemoryRegion *bios = g_new(MemoryRegion, 1);
> >>>> +    MemoryRegion *iomem = g_new(MemoryRegion, 1);
> >>>> +
> >>>> +    /* TODO: TCG will support all CPU types */
> >>>> +    if (!kvm_enabled()) {
> >>>> +        if (!machine->cpu_type) {
> >>>> +            machine->cpu_type = MIPS_CPU_TYPE_NAME("Loongson-3A1000");
> >>>> +        }
> >>>> +        if (!strstr(machine->cpu_type, "Loongson-3A1000")) {
> >>>> +            error_report("Loongson-3/TCG need cpu type Loongson-3A1000");
> >>>> +            exit(1);
> >>>> +        }
> >>>> +    } else {
> >>>> +        if (!machine->cpu_type) {
> >>>> +            machine->cpu_type = MIPS_CPU_TYPE_NAME("Loongson-3A4000");
> >>>> +        }
> >>>> +        if (!strstr(machine->cpu_type, "Loongson-3A4000")) {
> >>>> +            error_report("Loongson-3/KVM need cpu type Loongson-3A4000");
> >>>> +            exit(1);
> >>>> +        }
> >>>> +    }
> >>>> +
> >>>> +    if (ram_size < 512 * MiB) {
> >>>> +        error_report("Loongson-3 need at least 512MB memory");
> >>>
> >>> Typo "needs", but why?
> >> Though you told me "QEMU shouldn't assume anything about the guest",
> >> but Loongson-3 machine really need at least 512M memory. And as you
> >> said, this can simplify the memsize/highmemsize process (always larger
> >> than 256).
> >
> > OK, that's fine.
> >
> >>
> >>>
> >>>> +        exit(1);
> >>>> +    }
> >>>> +
> >>>> +    /*
> >>>> +     * The whole MMIO range among configure registers doesn't generate
> >>>> +     * exception when accessing invalid memory. Create an empty slot to
> >>>> +     * emulate this feature.
> >>>> +     */
> >>>> +    empty_slot_init("fallback", 0, 0x80000000);
> >>>
> >>> Again, this doesn't look correct (no comment in my previous review).
> >> This is written by Jiaxun because this is only needed by TCG, and he
> >> said that malta also uses empty_slot_init() here.
> >
> > IIRC for Malta this is a GT64120 specific hole.
> >
> > In this case I'd like to know the justification first.
> > Maybe you want to add this hole in the LOONGSON_LIOINTC device...
>
> Which makes me also wonder why are you splitting out 256MB of the RAM?
>
> This was a physical restriction of the GT64120 on 32-bit targets.
> Your hardware is virtual and 64-bit...
The physical memory address layout of Loongson-3:
0-0x40000000  Low RAM (256MB)
0x40000000-0x80000000 Hole for several MMIO registers (256MB)
0x80000000-TopOfMemory High RAM

Thogh this is a virtual platform, but the kernel link address is in
CKSEG0, so "Low RAM" should exist. Though MMIO is different from real
hardware, but put it in the same hole can make life easy.

Then it seems there is really a mistake of empty_slot_init() but has
nothing to do with liointc, and the right one should be
empty_slot_init("fallback", 0x40000000, 0x40000000);

Huacai
Philippe Mathieu-Daudé Sept. 19, 2020, 1:59 p.m. UTC | #8
On 9/19/20 3:00 AM, Huacai Chen wrote:
> Hi, Philippe,

> 

> On Thu, Sep 17, 2020 at 3:53 PM Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:

>>

>> On 9/16/20 12:47 PM, Philippe Mathieu-Daudé wrote:

>>> On 9/16/20 11:49 AM, Huacai Chen wrote:

>>>> On Wed, Sep 16, 2020 at 3:56 PM Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:

>>>>> On 9/16/20 4:12 AM, Huacai Chen wrote:

>>> [...]

>>>>>> +static void mips_loongson3_virt_init(MachineState *machine)

>>>>>> +{

>>>>>> +    int i;

>>>>>> +    long bios_size;

>>>>>> +    MIPSCPU *cpu;

>>>>>> +    CPUMIPSState *env;

>>>>>> +    DeviceState *liointc;

>>>>>> +    char *filename;

>>>>>> +    const char *kernel_cmdline = machine->kernel_cmdline;

>>>>>> +    const char *kernel_filename = machine->kernel_filename;

>>>>>> +    const char *initrd_filename = machine->initrd_filename;

>>>>>> +    ram_addr_t ram_size = machine->ram_size;

>>>>>> +    MemoryRegion *address_space_mem = get_system_memory();

>>>>>> +    MemoryRegion *ram = g_new(MemoryRegion, 1);

>>>>>> +    MemoryRegion *bios = g_new(MemoryRegion, 1);

>>>>>> +    MemoryRegion *iomem = g_new(MemoryRegion, 1);

>>>>>> +

>>>>>> +    /* TODO: TCG will support all CPU types */

>>>>>> +    if (!kvm_enabled()) {

>>>>>> +        if (!machine->cpu_type) {

>>>>>> +            machine->cpu_type = MIPS_CPU_TYPE_NAME("Loongson-3A1000");

>>>>>> +        }

>>>>>> +        if (!strstr(machine->cpu_type, "Loongson-3A1000")) {

>>>>>> +            error_report("Loongson-3/TCG need cpu type Loongson-3A1000");

>>>>>> +            exit(1);

>>>>>> +        }

>>>>>> +    } else {

>>>>>> +        if (!machine->cpu_type) {

>>>>>> +            machine->cpu_type = MIPS_CPU_TYPE_NAME("Loongson-3A4000");

>>>>>> +        }

>>>>>> +        if (!strstr(machine->cpu_type, "Loongson-3A4000")) {

>>>>>> +            error_report("Loongson-3/KVM need cpu type Loongson-3A4000");

>>>>>> +            exit(1);

>>>>>> +        }

>>>>>> +    }

>>>>>> +

>>>>>> +    if (ram_size < 512 * MiB) {

>>>>>> +        error_report("Loongson-3 need at least 512MB memory");

>>>>>

>>>>> Typo "needs", but why?

>>>> Though you told me "QEMU shouldn't assume anything about the guest",

>>>> but Loongson-3 machine really need at least 512M memory. And as you

>>>> said, this can simplify the memsize/highmemsize process (always larger

>>>> than 256).

>>>

>>> OK, that's fine.

>>>

>>>>

>>>>>

>>>>>> +        exit(1);

>>>>>> +    }

>>>>>> +

>>>>>> +    /*

>>>>>> +     * The whole MMIO range among configure registers doesn't generate

>>>>>> +     * exception when accessing invalid memory. Create an empty slot to

>>>>>> +     * emulate this feature.

>>>>>> +     */

>>>>>> +    empty_slot_init("fallback", 0, 0x80000000);

>>>>>

>>>>> Again, this doesn't look correct (no comment in my previous review).

>>>> This is written by Jiaxun because this is only needed by TCG, and he

>>>> said that malta also uses empty_slot_init() here.

>>>

>>> IIRC for Malta this is a GT64120 specific hole.

>>>

>>> In this case I'd like to know the justification first.

>>> Maybe you want to add this hole in the LOONGSON_LIOINTC device...

>>

>> Which makes me also wonder why are you splitting out 256MB of the RAM?

>>

>> This was a physical restriction of the GT64120 on 32-bit targets.

>> Your hardware is virtual and 64-bit...

> The physical memory address layout of Loongson-3:

> 0-0x40000000  Low RAM (256MB)

> 0x40000000-0x80000000 Hole for several MMIO registers (256MB)

> 0x80000000-TopOfMemory High RAM

> 

> Thogh this is a virtual platform, but the kernel link address is in

> CKSEG0, so "Low RAM" should exist. Though MMIO is different from real

> hardware, but put it in the same hole can make life easy.


OK...

> 

> Then it seems there is really a mistake of empty_slot_init() but has

> nothing to do with liointc, and the right one should be

> empty_slot_init("fallback", 0x40000000, 0x40000000);


The EMPTY_SLOT models physical slot for busses that don't
generate bus error when the slot is accessed and there is
nothing there.

If the 256MiB region starting at 0x40000000 is reserved for
MMIO registers, you certainly want to get a bus error if the
CPU tries to address an unmapped/illegal address.

If you know some area belong to a device that might be accessed
by firmware/kernel but it isn't important to model it, then you
can create an UNIMP_DEVICE with create_unimplemented_device(),
which behaves as RAZ/WI accesses on the bus.

Regards,

Phil.

> 

> Huacai

>
chen huacai Sept. 21, 2020, 2:12 a.m. UTC | #9
Hi, Philippe,

On Sat, Sep 19, 2020 at 9:59 PM Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
>

> On 9/19/20 3:00 AM, Huacai Chen wrote:

> > Hi, Philippe,

> >

> > On Thu, Sep 17, 2020 at 3:53 PM Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:

> >>

> >> On 9/16/20 12:47 PM, Philippe Mathieu-Daudé wrote:

> >>> On 9/16/20 11:49 AM, Huacai Chen wrote:

> >>>> On Wed, Sep 16, 2020 at 3:56 PM Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:

> >>>>> On 9/16/20 4:12 AM, Huacai Chen wrote:

> >>> [...]

> >>>>>> +static void mips_loongson3_virt_init(MachineState *machine)

> >>>>>> +{

> >>>>>> +    int i;

> >>>>>> +    long bios_size;

> >>>>>> +    MIPSCPU *cpu;

> >>>>>> +    CPUMIPSState *env;

> >>>>>> +    DeviceState *liointc;

> >>>>>> +    char *filename;

> >>>>>> +    const char *kernel_cmdline = machine->kernel_cmdline;

> >>>>>> +    const char *kernel_filename = machine->kernel_filename;

> >>>>>> +    const char *initrd_filename = machine->initrd_filename;

> >>>>>> +    ram_addr_t ram_size = machine->ram_size;

> >>>>>> +    MemoryRegion *address_space_mem = get_system_memory();

> >>>>>> +    MemoryRegion *ram = g_new(MemoryRegion, 1);

> >>>>>> +    MemoryRegion *bios = g_new(MemoryRegion, 1);

> >>>>>> +    MemoryRegion *iomem = g_new(MemoryRegion, 1);

> >>>>>> +

> >>>>>> +    /* TODO: TCG will support all CPU types */

> >>>>>> +    if (!kvm_enabled()) {

> >>>>>> +        if (!machine->cpu_type) {

> >>>>>> +            machine->cpu_type = MIPS_CPU_TYPE_NAME("Loongson-3A1000");

> >>>>>> +        }

> >>>>>> +        if (!strstr(machine->cpu_type, "Loongson-3A1000")) {

> >>>>>> +            error_report("Loongson-3/TCG need cpu type Loongson-3A1000");

> >>>>>> +            exit(1);

> >>>>>> +        }

> >>>>>> +    } else {

> >>>>>> +        if (!machine->cpu_type) {

> >>>>>> +            machine->cpu_type = MIPS_CPU_TYPE_NAME("Loongson-3A4000");

> >>>>>> +        }

> >>>>>> +        if (!strstr(machine->cpu_type, "Loongson-3A4000")) {

> >>>>>> +            error_report("Loongson-3/KVM need cpu type Loongson-3A4000");

> >>>>>> +            exit(1);

> >>>>>> +        }

> >>>>>> +    }

> >>>>>> +

> >>>>>> +    if (ram_size < 512 * MiB) {

> >>>>>> +        error_report("Loongson-3 need at least 512MB memory");

> >>>>>

> >>>>> Typo "needs", but why?

> >>>> Though you told me "QEMU shouldn't assume anything about the guest",

> >>>> but Loongson-3 machine really need at least 512M memory. And as you

> >>>> said, this can simplify the memsize/highmemsize process (always larger

> >>>> than 256).

> >>>

> >>> OK, that's fine.

> >>>

> >>>>

> >>>>>

> >>>>>> +        exit(1);

> >>>>>> +    }

> >>>>>> +

> >>>>>> +    /*

> >>>>>> +     * The whole MMIO range among configure registers doesn't generate

> >>>>>> +     * exception when accessing invalid memory. Create an empty slot to

> >>>>>> +     * emulate this feature.

> >>>>>> +     */

> >>>>>> +    empty_slot_init("fallback", 0, 0x80000000);

> >>>>>

> >>>>> Again, this doesn't look correct (no comment in my previous review).

> >>>> This is written by Jiaxun because this is only needed by TCG, and he

> >>>> said that malta also uses empty_slot_init() here.

> >>>

> >>> IIRC for Malta this is a GT64120 specific hole.

> >>>

> >>> In this case I'd like to know the justification first.

> >>> Maybe you want to add this hole in the LOONGSON_LIOINTC device...

> >>

> >> Which makes me also wonder why are you splitting out 256MB of the RAM?

> >>

> >> This was a physical restriction of the GT64120 on 32-bit targets.

> >> Your hardware is virtual and 64-bit...

> > The physical memory address layout of Loongson-3:

> > 0-0x40000000  Low RAM (256MB)

> > 0x40000000-0x80000000 Hole for several MMIO registers (256MB)

> > 0x80000000-TopOfMemory High RAM

> >

> > Thogh this is a virtual platform, but the kernel link address is in

> > CKSEG0, so "Low RAM" should exist. Though MMIO is different from real

> > hardware, but put it in the same hole can make life easy.

>

> OK...

>

> >

> > Then it seems there is really a mistake of empty_slot_init() but has

> > nothing to do with liointc, and the right one should be

> > empty_slot_init("fallback", 0x40000000, 0x40000000);

>

> The EMPTY_SLOT models physical slot for busses that don't

> generate bus error when the slot is accessed and there is

> nothing there.

>

> If the 256MiB region starting at 0x40000000 is reserved for

> MMIO registers, you certainly want to get a bus error if the

> CPU tries to address an unmapped/illegal address.

>

> If you know some area belong to a device that might be accessed

> by firmware/kernel but it isn't important to model it, then you

> can create an UNIMP_DEVICE with create_unimplemented_device(),

> which behaves as RAZ/WI accesses on the bus.

Yes, there are some MMIO access from firmware/kernel that doesn't
belong to any emulated devices, then I found that "empty slot" and
"unimplemented device" is nearly the same thing, what are their
differences?

Huacai
>

> Regards,

>

> Phil.

>

> >

> > Huacai

> >




-- 
Huacai Chen
Philippe Mathieu-Daudé Sept. 24, 2020, 3:40 p.m. UTC | #10
On 9/16/20 11:49 AM, Huacai Chen wrote:
> Hi, Philippe,

> 

> On Wed, Sep 16, 2020 at 3:56 PM Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:

>>

>> Hi Huacai,

>>

>> On 9/16/20 4:12 AM, Huacai Chen wrote:

...
>> hw/mips/loongson3_virt.c:373:15: note: each undeclared identifier is

>> reported only once for each function it appears in

>> hw/mips/loongson3_virt.c:373:15: error: excess elements in struct

>> initializer [-Werror]

>> hw/mips/loongson3_virt.c:373:15: note: (near initialization for 'freq_reg')

>> hw/mips/loongson3_virt.c:374:9: error: unknown field 'addr' specified in

>> initializer

>>          .addr = (uintptr_t)(&freq)

>>          ^

>> hw/mips/loongson3_virt.c:374:17: error: excess elements in struct

>> initializer [-Werror]

>>          .addr = (uintptr_t)(&freq)

>>                  ^

>> hw/mips/loongson3_virt.c:374:17: note: (near initialization for 'freq_reg')

>> hw/mips/loongson3_virt.c:372:24: error: storage size of 'freq_reg' isn't

>> known

>>      struct kvm_one_reg freq_reg = {

>>                         ^

>> hw/mips/loongson3_virt.c:380:41: error: 'KVM_GET_ONE_REG' undeclared

>> (first use in this function)

>>          ret = kvm_vcpu_ioctl(first_cpu, KVM_GET_ONE_REG, &freq_reg);

>>                                          ^

>> hw/mips/loongson3_virt.c:372:24: error: unused variable 'freq_reg'

>> [-Werror=unused-variable]

>>      struct kvm_one_reg freq_reg = {

>>                         ^

>> hw/mips/loongson3_virt.c: In function 'init_loongson_params':

>> hw/mips/loongson3_virt.c:467:25: error: cast from pointer to integer of

>> different size [-Werror=pointer-to-int-cast]

>>      lp->memory_offset = (unsigned long long)init_memory_map(p)

>>                          ^

> I guess this happens on a 32bit platform where pointer is 32bit, and

> could you please suggest a best solution for this? Maybe use uintptr_t

> instead of unsigned long long?


Since the machine doesn't have to know the EFI structures
layout, I'd change your method to fill EFI structures as i.e.:

/*
 * @ptr: Pointer to fill
 * @size: Buffer size available at @ptr
 * Returns: Structure size filled on success, -1 on error.
 */
size_t fill_efi_memory_map_loongson(char *ptr, size_t size);

And move that to hw/mips/loongson_efi.{c,h}.

Then you don't need to worry about host pointer size, you just
exchange buffer/size, then caller can round up and increment an
offset.

BTW the EFI helpers are not endian safe.

You should use the helpers described in docs/devel/loads-stores.rst:

stw_le_p, stl_le_p(), ... (as I don't expect big-endian guests).

Regards,

Phil.
Huacai Chen Sept. 25, 2020, 4:28 a.m. UTC | #11
Hi, Philippe,

On Thu, Sep 24, 2020 at 11:40 PM Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
>

> On 9/16/20 11:49 AM, Huacai Chen wrote:

> > Hi, Philippe,

> >

> > On Wed, Sep 16, 2020 at 3:56 PM Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:

> >>

> >> Hi Huacai,

> >>

> >> On 9/16/20 4:12 AM, Huacai Chen wrote:

> ...

> >> hw/mips/loongson3_virt.c:373:15: note: each undeclared identifier is

> >> reported only once for each function it appears in

> >> hw/mips/loongson3_virt.c:373:15: error: excess elements in struct

> >> initializer [-Werror]

> >> hw/mips/loongson3_virt.c:373:15: note: (near initialization for 'freq_reg')

> >> hw/mips/loongson3_virt.c:374:9: error: unknown field 'addr' specified in

> >> initializer

> >>          .addr = (uintptr_t)(&freq)

> >>          ^

> >> hw/mips/loongson3_virt.c:374:17: error: excess elements in struct

> >> initializer [-Werror]

> >>          .addr = (uintptr_t)(&freq)

> >>                  ^

> >> hw/mips/loongson3_virt.c:374:17: note: (near initialization for 'freq_reg')

> >> hw/mips/loongson3_virt.c:372:24: error: storage size of 'freq_reg' isn't

> >> known

> >>      struct kvm_one_reg freq_reg = {

> >>                         ^

> >> hw/mips/loongson3_virt.c:380:41: error: 'KVM_GET_ONE_REG' undeclared

> >> (first use in this function)

> >>          ret = kvm_vcpu_ioctl(first_cpu, KVM_GET_ONE_REG, &freq_reg);

> >>                                          ^

> >> hw/mips/loongson3_virt.c:372:24: error: unused variable 'freq_reg'

> >> [-Werror=unused-variable]

> >>      struct kvm_one_reg freq_reg = {

> >>                         ^

> >> hw/mips/loongson3_virt.c: In function 'init_loongson_params':

> >> hw/mips/loongson3_virt.c:467:25: error: cast from pointer to integer of

> >> different size [-Werror=pointer-to-int-cast]

> >>      lp->memory_offset = (unsigned long long)init_memory_map(p)

> >>                          ^

> > I guess this happens on a 32bit platform where pointer is 32bit, and

> > could you please suggest a best solution for this? Maybe use uintptr_t

> > instead of unsigned long long?

>

> Since the machine doesn't have to know the EFI structures

> layout, I'd change your method to fill EFI structures as i.e.:

>

> /*

>  * @ptr: Pointer to fill

>  * @size: Buffer size available at @ptr

>  * Returns: Structure size filled on success, -1 on error.

>  */

> size_t fill_efi_memory_map_loongson(char *ptr, size_t size);

>

> And move that to hw/mips/loongson_efi.{c,h}.

>

> Then you don't need to worry about host pointer size, you just

> exchange buffer/size, then caller can round up and increment an

> offset.

All boot parameters are located in a small region, so a uint32_t seems
enough for xxx_offset, so uintptr_t is just OK, I think.

>

> BTW the EFI helpers are not endian safe.

>

> You should use the helpers described in docs/devel/loads-stores.rst:

>

> stw_le_p, stl_le_p(), ... (as I don't expect big-endian guests).

This seems like a very big project, but I will do it in the next version.

Huacai
>

> Regards,

>

> Phil.
diff mbox series

Patch

diff --git a/default-configs/mips64el-softmmu.mak b/default-configs/mips64el-softmmu.mak
index 9f8a3ef..26c660a 100644
--- a/default-configs/mips64el-softmmu.mak
+++ b/default-configs/mips64el-softmmu.mak
@@ -3,6 +3,7 @@ 
 include mips-softmmu-common.mak
 CONFIG_IDE_VIA=y
 CONFIG_FULOONG=y
+CONFIG_LOONGSON3V=y
 CONFIG_ATI_VGA=y
 CONFIG_RTL8139_PCI=y
 CONFIG_JAZZ=y
diff --git a/hw/mips/Kconfig b/hw/mips/Kconfig
index 67d39c5..cc5609b 100644
--- a/hw/mips/Kconfig
+++ b/hw/mips/Kconfig
@@ -45,6 +45,17 @@  config FULOONG
     bool
     select PCI_BONITO
 
+config LOONGSON3V
+    bool
+    select PCKBD
+    select SERIAL
+    select GOLDFISH_RTC
+    select LOONGSON_LIOINTC
+    select PCI_EXPRESS_GENERIC_BRIDGE
+    select VIRTIO_VGA
+    select QXL if SPICE
+    select MSI_NONBROKEN
+
 config MIPS_CPS
     bool
     select PTIMER
diff --git a/hw/mips/fw_cfg.c b/hw/mips/fw_cfg.c
new file mode 100644
index 0000000..67c4a74
--- /dev/null
+++ b/hw/mips/fw_cfg.c
@@ -0,0 +1,35 @@ 
+/*
+ * QEMU fw_cfg helpers (MIPS specific)
+ *
+ * Copyright (c) 2020 Lemote, Inc.
+ *
+ * Author:
+ *   Huacai Chen (chenhc@lemote.com)
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/mips/fw_cfg.h"
+#include "hw/nvram/fw_cfg.h"
+
+const char *fw_cfg_arch_key_name(uint16_t key)
+{
+    static const struct {
+        uint16_t key;
+        const char *name;
+    } fw_cfg_arch_wellknown_keys[] = {
+        {FW_CFG_MACHINE_VERSION, "machine_version"},
+        {FW_CFG_CPU_FREQ, "cpu_frequency"},
+    };
+
+    for (size_t i = 0; i < ARRAY_SIZE(fw_cfg_arch_wellknown_keys); i++) {
+        if (fw_cfg_arch_wellknown_keys[i].key == key) {
+            return fw_cfg_arch_wellknown_keys[i].name;
+        }
+    }
+    return NULL;
+}
diff --git a/hw/mips/fw_cfg.h b/hw/mips/fw_cfg.h
new file mode 100644
index 0000000..e317d5b
--- /dev/null
+++ b/hw/mips/fw_cfg.h
@@ -0,0 +1,19 @@ 
+/*
+ * QEMU fw_cfg helpers (MIPS specific)
+ *
+ * Copyright (c) 2020 Huacai Chen
+ *
+ * SPDX-License-Identifier: MIT
+ */
+
+#ifndef HW_MIPS_FW_CFG_H
+#define HW_MIPS_FW_CFG_H
+
+#include "hw/boards.h"
+#include "hw/nvram/fw_cfg.h"
+
+/* Data for BIOS to identify machine */
+#define FW_CFG_MACHINE_VERSION  (FW_CFG_ARCH_LOCAL + 0)
+#define FW_CFG_CPU_FREQ         (FW_CFG_ARCH_LOCAL + 1)
+
+#endif
diff --git a/hw/mips/loongson3_virt.c b/hw/mips/loongson3_virt.c
new file mode 100644
index 0000000..14d3024
--- /dev/null
+++ b/hw/mips/loongson3_virt.c
@@ -0,0 +1,956 @@ 
+/*
+ * Generic Loongson-3 Platform support
+ *
+ * Copyright (c) 2017-2020 Huacai Chen (chenhc@lemote.com)
+ * Copyright (c) 2017-2020 Jiaxun Yang <jiaxun.yang@flygoat.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+/*
+ * Generic virtualized PC Platform based on Loongson-3 CPU (MIPS64R2 with
+ * extensions, 800~2000MHz)
+ */
+
+#include "qemu/osdep.h"
+#include "qemu-common.h"
+#include "qemu/units.h"
+#include "qapi/error.h"
+#include "cpu.h"
+#include "elf.h"
+#include "kvm_mips.h"
+#include "hw/boards.h"
+#include "hw/char/serial.h"
+#include "hw/mips/mips.h"
+#include "hw/mips/cpudevs.h"
+#include "hw/mips/fw_cfg.h"
+#include "hw/misc/empty_slot.h"
+#include "hw/intc/i8259.h"
+#include "hw/loader.h"
+#include "hw/isa/superio.h"
+#include "hw/pci/msi.h"
+#include "hw/pci/pci.h"
+#include "hw/pci/pci_host.h"
+#include "hw/pci-host/gpex.h"
+#include "hw/rtc/mc146818rtc.h"
+#include "hw/usb.h"
+#include "net/net.h"
+#include "exec/address-spaces.h"
+#include "sysemu/kvm.h"
+#include "sysemu/qtest.h"
+#include "sysemu/reset.h"
+#include "sysemu/runstate.h"
+#include "qemu/log.h"
+#include "qemu/error-report.h"
+
+#define PM_CNTL_MODE          0x10
+
+/* Overall MMIO & Memory layout */
+enum {
+    VIRT_LOWMEM,
+    VIRT_PM,
+    VIRT_FW_CFG,
+    VIRT_RTC,
+    VIRT_PCIE_PIO,
+    VIRT_PCIE_ECAM,
+    VIRT_BIOS_ROM,
+    VIRT_UART,
+    VIRT_LIOINTC,
+    VIRT_PCIE_MMIO,
+    VIRT_HIGHMEM
+};
+
+/* Low MEM layout for QEMU kernel loader */
+enum {
+    LOADER_KERNEL,
+    LOADER_INITRD,
+    LOADER_CMDLINE
+};
+
+/* BIOS ROM layout for QEMU kernel loader */
+enum {
+    LOADER_BOOTROM,
+    LOADER_PARAM,
+};
+
+struct MemmapEntry {
+    hwaddr base;
+    hwaddr size;
+};
+
+/*
+ * LEFI (a UEFI-like interface for BIOS-Kernel boot parameters) data structrues
+ * defined at arch/mips/include/asm/mach-loongson64/boot_param.h in Linux kernel
+ */
+struct efi_memory_map_loongson {
+    uint16_t vers;               /* version of efi_memory_map */
+    uint32_t nr_map;             /* number of memory_maps */
+    uint32_t mem_freq;           /* memory frequence */
+    struct mem_map {
+        uint32_t node_id;        /* node_id which memory attached to */
+        uint32_t mem_type;       /* system memory, pci memory, pci io, etc. */
+        uint64_t mem_start;      /* memory map start address */
+        uint32_t mem_size;       /* each memory_map size, not the total size */
+    } map[128];
+} __attribute__((packed));
+
+enum loongson_cpu_type {
+    Legacy_2E = 0x0,
+    Legacy_2F = 0x1,
+    Legacy_3A = 0x2,
+    Legacy_3B = 0x3,
+    Legacy_1A = 0x4,
+    Legacy_1B = 0x5,
+    Legacy_2G = 0x6,
+    Legacy_2H = 0x7,
+    Loongson_1A = 0x100,
+    Loongson_1B = 0x101,
+    Loongson_2E = 0x200,
+    Loongson_2F = 0x201,
+    Loongson_2G = 0x202,
+    Loongson_2H = 0x203,
+    Loongson_3A = 0x300,
+    Loongson_3B = 0x301
+};
+
+/*
+ * Capability and feature descriptor structure for MIPS CPU
+ */
+struct efi_cpuinfo_loongson {
+    uint16_t vers;               /* version of efi_cpuinfo_loongson */
+    uint32_t processor_id;       /* PRID, e.g. 6305, 6306 */
+    uint32_t cputype;            /* Loongson_3A/3B, etc. */
+    uint32_t total_node;         /* num of total numa nodes */
+    uint16_t cpu_startup_core_id;   /* Boot core id */
+    uint16_t reserved_cores_mask;
+    uint32_t cpu_clock_freq;     /* cpu_clock */
+    uint32_t nr_cpus;
+    char cpuname[64];
+} __attribute__((packed));
+
+#define MAX_UARTS 64
+struct uart_device {
+    uint32_t iotype;
+    uint32_t uartclk;
+    uint32_t int_offset;
+    uint64_t uart_base;
+} __attribute__((packed));
+
+#define MAX_SENSORS 64
+#define SENSOR_TEMPER  0x00000001
+#define SENSOR_VOLTAGE 0x00000002
+#define SENSOR_FAN     0x00000004
+struct sensor_device {
+    char name[32];  /* a formal name */
+    char label[64]; /* a flexible description */
+    uint32_t type;       /* SENSOR_* */
+    uint32_t id;         /* instance id of a sensor-class */
+    uint32_t fan_policy; /* step speed or constant speed */
+    uint32_t fan_percent;/* only for constant speed policy */
+    uint64_t base_addr;  /* base address of device registers */
+} __attribute__((packed));
+
+struct system_loongson {
+    uint16_t vers;               /* version of system_loongson */
+    uint32_t ccnuma_smp;         /* 0: no numa; 1: has numa */
+    uint32_t sing_double_channel;/* 1: single; 2: double */
+    uint32_t nr_uarts;
+    struct uart_device uarts[MAX_UARTS];
+    uint32_t nr_sensors;
+    struct sensor_device sensors[MAX_SENSORS];
+    char has_ec;
+    char ec_name[32];
+    uint64_t ec_base_addr;
+    char has_tcm;
+    char tcm_name[32];
+    uint64_t tcm_base_addr;
+    uint64_t workarounds;
+    uint64_t of_dtb_addr; /* NULL if not support */
+} __attribute__((packed));
+
+struct irq_source_routing_table {
+    uint16_t vers;
+    uint16_t size;
+    uint16_t rtr_bus;
+    uint16_t rtr_devfn;
+    uint32_t vendor;
+    uint32_t device;
+    uint32_t PIC_type;           /* conform use HT or PCI to route to CPU-PIC */
+    uint64_t ht_int_bit;         /* 3A: 1<<24; 3B: 1<<16 */
+    uint64_t ht_enable;          /* irqs used in this PIC */
+    uint32_t node_id;            /* node id: 0x0-0; 0x1-1; 0x10-2; 0x11-3 */
+    uint64_t pci_mem_start_addr;
+    uint64_t pci_mem_end_addr;
+    uint64_t pci_io_start_addr;
+    uint64_t pci_io_end_addr;
+    uint64_t pci_config_addr;
+    uint16_t dma_mask_bits;
+    uint16_t dma_noncoherent;
+} __attribute__((packed));
+
+struct interface_info {
+    uint16_t vers;               /* version of the specificition */
+    uint16_t size;
+    uint8_t  flag;
+    char description[64];
+} __attribute__((packed));
+
+#define MAX_RESOURCE_NUMBER 128
+struct resource_loongson {
+    uint64_t start;              /* resource start address */
+    uint64_t end;                /* resource end address */
+    char name[64];
+    uint32_t flags;
+};
+
+struct archdev_data {};          /* arch specific additions */
+
+struct board_devices {
+    char name[64];               /* hold the device name */
+    uint32_t num_resources;      /* number of device_resource */
+    /* for each device's resource */
+    struct resource_loongson resource[MAX_RESOURCE_NUMBER];
+    /* arch specific additions */
+    struct archdev_data archdata;
+};
+
+struct loongson_special_attribute {
+    uint16_t vers;               /* version of this special */
+    char special_name[64];       /* special_atribute_name */
+    uint32_t loongson_special_type; /* type of special device */
+    /* for each device's resource */
+    struct resource_loongson resource[MAX_RESOURCE_NUMBER];
+};
+
+struct loongson_params {
+    uint64_t memory_offset;      /* efi_memory_map_loongson struct offset */
+    uint64_t cpu_offset;         /* efi_cpuinfo_loongson struct offset */
+    uint64_t system_offset;      /* system_loongson struct offset */
+    uint64_t irq_offset;         /* irq_source_routing_table struct offset */
+    uint64_t interface_offset;   /* interface_info struct offset */
+    uint64_t special_offset;     /* loongson_special_attribute struct offset */
+    uint64_t boarddev_table_offset;  /* board_devices offset */
+};
+
+struct smbios_tables {
+    uint16_t vers;               /* version of smbios */
+    uint64_t vga_bios;           /* vga_bios address */
+    struct loongson_params lp;
+};
+
+struct efi_reset_system_t {
+    uint64_t ResetCold;
+    uint64_t ResetWarm;
+    uint64_t ResetType;
+    uint64_t Shutdown;
+    uint64_t DoSuspend; /* NULL if not support */
+};
+
+struct efi_loongson {
+    uint64_t mps;                /* MPS table */
+    uint64_t acpi;               /* ACPI table (IA64 ext 0.71) */
+    uint64_t acpi20;             /* ACPI table (ACPI 2.0) */
+    struct smbios_tables smbios; /* SM BIOS table */
+    uint64_t sal_systab;         /* SAL system table */
+    uint64_t boot_info;          /* boot info table */
+};
+
+struct boot_params {
+    struct efi_loongson efi;
+    struct efi_reset_system_t reset_system;
+};
+
+#define LOONGSON_MAX_VCPUS      16
+
+#define LOONGSON3_BIOSNAME "bios_loongson3.bin"
+
+#define UART_IRQ            0
+#define RTC_IRQ             1
+#define PCIE_IRQ_BASE       2
+
+#define align(x) (((x) + 63) & ~63)
+
+static const struct MemmapEntry virt_memmap[] = {
+    [VIRT_LOWMEM] =      { 0x00000000,    0x10000000 },
+    [VIRT_PM] =          { 0x10080000,         0x100 },
+    [VIRT_FW_CFG] =      { 0x10080100,         0x100 },
+    [VIRT_RTC] =         { 0x10081000,        0x1000 },
+    [VIRT_PCIE_PIO] =    { 0x18000000,       0x80000 },
+    [VIRT_PCIE_ECAM] =   { 0x1a000000,     0x2000000 },
+    [VIRT_BIOS_ROM] =    { 0x1fc00000,      0x200000 },
+    [VIRT_UART] =        { 0x1fe001e0,           0x8 },
+    [VIRT_LIOINTC] =     { 0x3ff01400,          0x64 },
+    [VIRT_PCIE_MMIO] =   { 0x40000000,    0x40000000 },
+    [VIRT_HIGHMEM] =     { 0x80000000,           0x0 }, /* Variable */
+};
+
+static const struct MemmapEntry loader_memmap[] = {
+    [LOADER_KERNEL] =    { 0x00000000,     0x4000000 },
+    [LOADER_INITRD] =    { 0x04000000,           0x0 }, /* Variable */
+    [LOADER_CMDLINE] =   { 0x0ff00000,      0x100000 },
+};
+
+static const struct MemmapEntry loader_rommap[] = {
+    [LOADER_BOOTROM] =   { 0x1fc00000,        0x1000 },
+    [LOADER_PARAM] =     { 0x1fc01000,       0x10000 },
+};
+
+static struct _loaderparams {
+    uint64_t cpu_freq;
+    uint64_t ram_size;
+    const char *kernel_cmdline;
+    const char *kernel_filename;
+    const char *initrd_filename;
+    uint64_t kernel_entry;
+    uint64_t a0, a1, a2;
+} loaderparams;
+
+static uint64_t loongson3_pm_read(void *opaque, hwaddr addr, unsigned size)
+{
+    return 0;
+}
+
+static void loongson3_pm_write(void *opaque, hwaddr addr, uint64_t val, unsigned size)
+{
+    if (addr != PM_CNTL_MODE) {
+        return;
+    }
+
+    switch (val) {
+    case 0x00:
+        qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
+        return;
+    case 0xff:
+        qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN);
+        return;
+    default:
+        return;
+    }
+}
+
+static const MemoryRegionOps loongson3_pm_ops = {
+    .read  = loongson3_pm_read,
+    .write = loongson3_pm_write,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static struct efi_memory_map_loongson *init_memory_map(void *g_map)
+{
+    struct efi_memory_map_loongson *emap = g_map;
+
+    emap->nr_map = 2;
+    emap->mem_freq = 300000000;
+
+    emap->map[0].node_id = 0;
+    emap->map[0].mem_type = 1;
+    emap->map[0].mem_start = 0x0;
+    emap->map[0].mem_size = 240;
+
+    emap->map[1].node_id = 0;
+    emap->map[1].mem_type = 2;
+    emap->map[1].mem_start = 0x90000000;
+    emap->map[1].mem_size = (loaderparams.ram_size / MiB) - 256;
+
+    return emap;
+}
+
+static uint64_t get_cpu_freq(void)
+{
+    int ret;
+    uint64_t freq;
+    struct kvm_one_reg freq_reg = {
+        .id = KVM_REG_MIPS_COUNT_HZ,
+        .addr = (uintptr_t)(&freq)
+    };
+
+    if (!kvm_enabled()) {
+        return 200 * 1000 * 1000;
+    } else {
+        ret = kvm_vcpu_ioctl(first_cpu, KVM_GET_ONE_REG, &freq_reg);
+        if (ret < 0) {
+            return 1600 * 1000 * 1000;
+        }
+        return (freq * 2);
+    }
+}
+
+static struct efi_cpuinfo_loongson *init_cpu_info(void *g_cpuinfo_loongson)
+{
+    struct efi_cpuinfo_loongson *c = g_cpuinfo_loongson;
+
+    c->cputype = Loongson_3A;
+    c->processor_id = MIPS_CPU(first_cpu)->env.CP0_PRid;
+    if (loaderparams.cpu_freq > UINT_MAX) {
+        c->cpu_clock_freq = UINT_MAX;
+    } else {
+        c->cpu_clock_freq = loaderparams.cpu_freq;
+    }
+
+    c->cpu_startup_core_id = 0;
+    c->nr_cpus = current_machine->smp.cpus;
+    c->total_node = (current_machine->smp.cpus + 3) / 4;
+
+    return c;
+}
+
+static struct system_loongson *init_system_loongson(void *g_system)
+{
+    struct system_loongson *s = g_system;
+
+    s->ccnuma_smp = 0;
+    s->sing_double_channel = 1;
+    s->nr_uarts = 1;
+    s->uarts[0].iotype = 2;
+    s->uarts[0].int_offset = 2;
+    s->uarts[0].uartclk = 25000000; /* Random value */
+    s->uarts[0].uart_base = virt_memmap[VIRT_UART].base;
+
+    return s;
+}
+
+static struct irq_source_routing_table *init_irq_source(void *g_irq_source)
+{
+    struct irq_source_routing_table *irq_info = g_irq_source;
+
+    irq_info->node_id = 0;
+    irq_info->PIC_type = 0;
+    irq_info->dma_mask_bits = 64;
+    irq_info->pci_mem_start_addr = virt_memmap[VIRT_PCIE_MMIO].base;
+    irq_info->pci_mem_end_addr   = virt_memmap[VIRT_PCIE_MMIO].base +
+                                   virt_memmap[VIRT_PCIE_MMIO].size - 1;
+    irq_info->pci_io_start_addr  = virt_memmap[VIRT_PCIE_PIO].base;
+
+    return irq_info;
+}
+
+static struct interface_info *init_interface_info(void *g_interface)
+{
+    struct interface_info *interface = g_interface;
+
+    interface->vers = 0x01;
+    strcpy(interface->description, "UEFI_Version_v1.0");
+
+    return interface;
+}
+
+static struct board_devices *board_devices_info(void *g_board)
+{
+    struct board_devices *bd = g_board;
+
+    strcpy(bd->name, "Loongson-3A-VIRT-1w-V1.00-demo");
+
+    return bd;
+}
+
+static struct loongson_special_attribute *init_special_info(void *g_special)
+{
+    struct loongson_special_attribute *special = g_special;
+
+    strcpy(special->special_name, "2017-05-01");
+
+    return special;
+}
+
+static void init_loongson_params(struct loongson_params *lp, void *p)
+{
+    lp->memory_offset = (unsigned long long)init_memory_map(p)
+                        - (unsigned long long)lp;
+    p += align(sizeof(struct efi_memory_map_loongson));
+
+    lp->cpu_offset = (unsigned long long)init_cpu_info(p)
+                     - (unsigned long long)lp;
+    p += align(sizeof(struct efi_cpuinfo_loongson));
+
+    lp->system_offset = (unsigned long long)init_system_loongson(p)
+                        - (unsigned long long)lp;
+    p += align(sizeof(struct system_loongson));
+
+    lp->irq_offset = (unsigned long long)init_irq_source(p)
+                     - (unsigned long long)lp;
+    p += align(sizeof(struct irq_source_routing_table));
+
+    lp->interface_offset = (unsigned long long)init_interface_info(p)
+                           - (unsigned long long)lp;
+    p += align(sizeof(struct interface_info));
+
+    lp->boarddev_table_offset = (unsigned long long)board_devices_info(p)
+                                - (unsigned long long)lp;
+    p += align(sizeof(struct board_devices));
+
+    lp->special_offset = (unsigned long long)init_special_info(p)
+                         - (unsigned long long)lp;
+    p += align(sizeof(struct loongson_special_attribute));
+}
+
+static void init_reset_system(struct efi_reset_system_t *reset)
+{
+    reset->Shutdown = 0xffffffffbfc000a8;
+    reset->ResetCold = 0xffffffffbfc00080;
+    reset->ResetWarm = 0xffffffffbfc00080;
+}
+
+static void init_boot_param(void)
+{
+    void *p;
+    struct boot_params *bp;
+
+    p = g_malloc0(loader_rommap[LOADER_PARAM].size);
+    bp = p;
+
+    bp->efi.smbios.vers = 1;
+    init_reset_system(&(bp->reset_system));
+    p += align(sizeof(struct boot_params));
+    init_loongson_params(&(bp->efi.smbios.lp), p);
+
+    rom_add_blob_fixed("params_rom", bp,
+                       loader_rommap[LOADER_PARAM].size,
+                       loader_rommap[LOADER_PARAM].base);
+
+    g_free(bp);
+
+    loaderparams.a2 = cpu_mips_phys_to_kseg0(NULL,
+                                             loader_rommap[LOADER_PARAM].base);
+}
+
+static void init_boot_rom(void)
+{
+    const unsigned int boot_code[] = {
+        0x40086000,   /* mfc0    t0, CP0_STATUS                               */
+        0x240900E4,   /* li      t1, 0xe4         #set kx, sx, ux, erl        */
+        0x01094025,   /* or      t0, t0, t1                                   */
+        0x3C090040,   /* lui     t1, 0x40         #set bev                    */
+        0x01094025,   /* or      t0, t0, t1                                   */
+        0x40886000,   /* mtc0    t0, CP0_STATUS                               */
+        0x00000000,
+        0x40806800,   /* mtc0    zero, CP0_CAUSE                              */
+        0x00000000,
+        0x400A7801,   /* mfc0    t2, $15, 1                                   */
+        0x314A00FF,   /* andi    t2, 0x0ff                                    */
+        0x3C089000,   /* dli     t0, 0x900000003ff01000                       */
+        0x00084438,
+        0x35083FF0,
+        0x00084438,
+        0x35081000,
+        0x314B0003,   /* andi    t3, t2, 0x3      #local cpuid                */
+        0x000B5A00,   /* sll     t3, 8                                        */
+        0x010B4025,   /* or      t0, t0, t3                                   */
+        0x314C000C,   /* andi    t4, t2, 0xc      #node id                    */
+        0x000C62BC,   /* dsll    t4, 42                                       */
+        0x010C4025,   /* or      t0, t0, t4                                   */
+                      /* WaitForInit:                                         */
+        0xDD020020,   /* ld      v0, FN_OFF(t0)   #FN_OFF 0x020               */
+        0x1040FFFE,   /* beqz    v0, WaitForInit                              */
+        0x00000000,   /* nop                                                  */
+        0xDD1D0028,   /* ld      sp, SP_OFF(t0)   #FN_OFF 0x028               */
+        0xDD1C0030,   /* ld      gp, GP_OFF(t0)   #FN_OFF 0x030               */
+        0xDD050038,   /* ld      a1, A1_OFF(t0)   #FN_OFF 0x038               */
+        0x00400008,   /* jr      v0               #byebye                     */
+        0x00000000,   /* nop                                                  */
+        0x1000FFFF,   /* 1:  b   1b                                           */
+        0x00000000,   /* nop                                                  */
+
+                      /* Reset                                                */
+        0x3C0C9000,   /* dli     t0, 0x9000000010080010                       */
+        0x358C0000,
+        0x000C6438,
+        0x358C1008,
+        0x000C6438,
+        0x358C0010,
+        0x240D0000,   /* li      t1, 0x00                                     */
+        0xA18D0000,   /* sb      t1, (t0)                                     */
+        0x1000FFFF,   /* 1:  b   1b                                           */
+        0x00000000,   /* nop                                                  */
+
+                      /* Shutdown                                             */
+        0x3C0C9000,   /* dli     t0, 0x9000000010080010                       */
+        0x358C0000,
+        0x000C6438,
+        0x358C1008,
+        0x000C6438,
+        0x358C0010,
+        0x240D00FF,   /* li      t1, 0xff                                     */
+        0xA18D0000,   /* sb      t1, (t0)                                     */
+        0x1000FFFF,   /* 1:  b   1b                                           */
+        0x00000000    /* nop                                                  */
+    };
+
+    rom_add_blob_fixed("boot_rom", boot_code, sizeof(boot_code),
+                        loader_rommap[LOADER_BOOTROM].base);
+}
+
+static void fw_cfg_boot_set(void *opaque, const char *boot_device,
+                            Error **errp)
+{
+    fw_cfg_modify_i16(opaque, FW_CFG_BOOT_DEVICE, boot_device[0]);
+}
+
+static void fw_conf_init(unsigned long ram_size)
+{
+    FWCfgState *fw_cfg;
+    hwaddr cfg_addr = virt_memmap[VIRT_FW_CFG].base;
+
+    fw_cfg = fw_cfg_init_mem_wide(cfg_addr, cfg_addr + 8, 8, 0, NULL);
+    fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, (uint16_t)current_machine->smp.cpus);
+    fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)current_machine->smp.max_cpus);
+    fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
+    fw_cfg_add_i32(fw_cfg, FW_CFG_MACHINE_VERSION, 1);
+    fw_cfg_add_i64(fw_cfg, FW_CFG_CPU_FREQ, get_cpu_freq());
+    qemu_register_boot_set(fw_cfg_boot_set, fw_cfg);
+}
+
+static int set_prom_cmdline(ram_addr_t initrd_offset, long initrd_size)
+{
+    hwaddr cmdline_vaddr;
+    char memenv[32];
+    char highmemenv[32];
+    void *cmdline_buf;
+    unsigned int *parg_env;
+    int ret = 0;
+
+    /* Allocate cmdline_buf for command line. */
+    cmdline_buf = g_malloc0(loader_memmap[LOADER_CMDLINE].size);
+    cmdline_vaddr = cpu_mips_phys_to_kseg0(NULL,
+                                           loader_memmap[LOADER_CMDLINE].base);
+
+    /*
+     * Layout of cmdline_buf looks like this:
+     * argv[0], argv[1], 0, env[0], env[1], ... env[i], 0,
+     * argv[0]'s data, argv[1]'s data, env[0]'data, ..., env[i]'s data, 0
+     */
+    parg_env = (void *)cmdline_buf;
+
+    ret = (3 + 1) * 4;
+    *parg_env++ = cmdline_vaddr + ret;
+    ret += (1 + snprintf(cmdline_buf + ret, 256 - ret, "g"));
+
+    /* argv1 */
+    *parg_env++ = cmdline_vaddr + ret;
+    if (initrd_size > 0)
+        ret += (1 + snprintf(cmdline_buf + ret, 256 - ret,
+                "rd_start=0x" TARGET_FMT_lx " rd_size=%li %s",
+                cpu_mips_phys_to_kseg0(NULL, initrd_offset),
+                initrd_size, loaderparams.kernel_cmdline));
+    else
+        ret += (1 + snprintf(cmdline_buf + ret, 256 - ret, "%s",
+                loaderparams.kernel_cmdline));
+
+    /* argv2 */
+    *parg_env++ = cmdline_vaddr + 4 * ret;
+
+    /* env */
+    sprintf(memenv, "%ld", loaderparams.ram_size > 0x10000000
+            ? 256 : (loaderparams.ram_size >> 20));
+    sprintf(highmemenv, "%ld", loaderparams.ram_size > 0x10000000
+            ? (loaderparams.ram_size >> 20) - 256 : 0);
+
+    rom_add_blob_fixed("cmdline", cmdline_buf,
+                       loader_memmap[LOADER_CMDLINE].size,
+                       loader_memmap[LOADER_CMDLINE].base);
+
+    g_free(cmdline_buf);
+
+    loaderparams.a0 = 2;
+    loaderparams.a1 = cmdline_vaddr;
+
+    return 0;
+}
+
+static uint64_t load_kernel(CPUMIPSState *env)
+{
+    long kernel_size;
+    ram_addr_t initrd_offset;
+    uint64_t kernel_entry, kernel_low, kernel_high, initrd_size;
+
+    kernel_size = load_elf(loaderparams.kernel_filename, NULL,
+                           cpu_mips_kseg0_to_phys, NULL,
+                           (uint64_t *)&kernel_entry,
+                           (uint64_t *)&kernel_low, (uint64_t *)&kernel_high,
+                           NULL, 0, EM_MIPS, 1, 0);
+    if (kernel_size < 0) {
+        error_report("could not load kernel '%s': %s",
+                     loaderparams.kernel_filename,
+                     load_elf_strerror(kernel_size));
+        exit(1);
+    }
+
+    /* load initrd */
+    initrd_size = 0;
+    initrd_offset = 0;
+    if (loaderparams.initrd_filename) {
+        initrd_size = get_image_size(loaderparams.initrd_filename);
+        if (initrd_size > 0) {
+            initrd_offset = (kernel_high + ~INITRD_PAGE_MASK) &
+                            INITRD_PAGE_MASK;
+            initrd_offset = MAX(initrd_offset,
+                                loader_memmap[LOADER_INITRD].base);
+
+            if (initrd_offset + initrd_size > ram_size) {
+                error_report("memory too small for initial ram disk '%s'",
+                             loaderparams.initrd_filename);
+                exit(1);
+            }
+
+            initrd_size = load_image_targphys(loaderparams.initrd_filename,
+                                              initrd_offset,
+                                              ram_size - initrd_offset);
+        }
+
+        if (initrd_size == (target_ulong) -1) {
+            error_report("could not load initial ram disk '%s'",
+                         loaderparams.initrd_filename);
+            exit(1);
+        }
+    }
+
+    /* Setup prom cmdline. */
+    set_prom_cmdline(initrd_offset, initrd_size);
+
+    return kernel_entry;
+}
+
+static void main_cpu_reset(void *opaque)
+{
+    MIPSCPU *cpu = opaque;
+    CPUMIPSState *env = &cpu->env;
+
+    cpu_reset(CPU(cpu));
+
+    /* Loongson-3 reset stuff */
+    if (loaderparams.kernel_filename) {
+        if (cpu == MIPS_CPU(first_cpu)) {
+            env->active_tc.gpr[4] = loaderparams.a0;
+            env->active_tc.gpr[5] = loaderparams.a1;
+            env->active_tc.gpr[6] = loaderparams.a2;
+            env->active_tc.PC = loaderparams.kernel_entry;
+        }
+        env->CP0_Status &= ~((1 << CP0St_BEV) | (1 << CP0St_ERL));
+    }
+}
+
+static inline void loongson3_virt_devices_init(MachineState *machine, DeviceState *pic)
+{
+    int i;
+    qemu_irq irq;
+    PCIBus *pci_bus;
+    DeviceState *dev;
+    MemoryRegion *pio_alias;
+    MemoryRegion *mmio_alias, *mmio_reg;
+    MemoryRegion *ecam_alias, *ecam_reg;
+
+    dev = qdev_new(TYPE_GPEX_HOST);
+    sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
+    pci_bus = PCI_HOST_BRIDGE(dev)->bus;
+
+    ecam_alias = g_new0(MemoryRegion, 1);
+    ecam_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0);
+    memory_region_init_alias(ecam_alias, OBJECT(dev), "pcie-ecam",
+                             ecam_reg, 0, virt_memmap[VIRT_PCIE_ECAM].size);
+    memory_region_add_subregion(get_system_memory(),
+                                virt_memmap[VIRT_PCIE_ECAM].base, ecam_alias);
+
+    mmio_alias = g_new0(MemoryRegion, 1);
+    mmio_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 1);
+    memory_region_init_alias(mmio_alias, OBJECT(dev), "pcie-mmio",
+                             mmio_reg, virt_memmap[VIRT_PCIE_MMIO].base,
+                             virt_memmap[VIRT_PCIE_MMIO].size);
+    memory_region_add_subregion(get_system_memory(),
+                                virt_memmap[VIRT_PCIE_MMIO].base, mmio_alias);
+
+    pio_alias = g_new0(MemoryRegion, 1);
+    memory_region_init_alias(pio_alias, OBJECT(dev), "pcie-pio",
+                             get_system_io(), 0, virt_memmap[VIRT_PCIE_PIO].size);
+    memory_region_add_subregion(get_system_memory(),
+                                virt_memmap[VIRT_PCIE_PIO].base, pio_alias);
+    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 2, virt_memmap[VIRT_PCIE_PIO].base);
+
+    for (i = 0; i < GPEX_NUM_IRQS; i++) {
+        irq = qdev_get_gpio_in(pic, PCIE_IRQ_BASE + i);
+        sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, irq);
+        gpex_set_irq_num(GPEX_HOST(dev), i, PCIE_IRQ_BASE + i);
+    }
+
+    pci_vga_init(pci_bus);
+
+    if (defaults_enabled()) {
+        pci_create_simple(pci_bus, -1, "pci-ohci");
+        usb_create_simple(usb_bus_find(-1), "usb-kbd");
+        usb_create_simple(usb_bus_find(-1), "usb-tablet");
+    }
+
+    for (i = 0; i < nb_nics; i++) {
+        NICInfo *nd = &nd_table[i];
+
+        if (!nd->model) {
+            nd->model = g_strdup("virtio");
+        }
+
+        pci_nic_init_nofail(nd, pci_bus, nd->model, NULL);
+    }
+}
+
+static void mips_loongson3_virt_init(MachineState *machine)
+{
+    int i;
+    long bios_size;
+    MIPSCPU *cpu;
+    CPUMIPSState *env;
+    DeviceState *liointc;
+    char *filename;
+    const char *kernel_cmdline = machine->kernel_cmdline;
+    const char *kernel_filename = machine->kernel_filename;
+    const char *initrd_filename = machine->initrd_filename;
+    ram_addr_t ram_size = machine->ram_size;
+    MemoryRegion *address_space_mem = get_system_memory();
+    MemoryRegion *ram = g_new(MemoryRegion, 1);
+    MemoryRegion *bios = g_new(MemoryRegion, 1);
+    MemoryRegion *iomem = g_new(MemoryRegion, 1);
+
+    /* TODO: TCG will support all CPU types */
+    if (!kvm_enabled()) {
+        if (!machine->cpu_type) {
+            machine->cpu_type = MIPS_CPU_TYPE_NAME("Loongson-3A1000");
+        }
+        if (!strstr(machine->cpu_type, "Loongson-3A1000")) {
+            error_report("Loongson-3/TCG need cpu type Loongson-3A1000");
+            exit(1);
+        }
+    } else {
+        if (!machine->cpu_type) {
+            machine->cpu_type = MIPS_CPU_TYPE_NAME("Loongson-3A4000");
+        }
+        if (!strstr(machine->cpu_type, "Loongson-3A4000")) {
+            error_report("Loongson-3/KVM need cpu type Loongson-3A4000");
+            exit(1);
+        }
+    }
+
+    if (ram_size < 512 * MiB) {
+        error_report("Loongson-3 need at least 512MB memory");
+        exit(1);
+    }
+
+    /*
+     * The whole MMIO range among configure registers doesn't generate
+     * exception when accessing invalid memory. Create an empty slot to
+     * emulate this feature.
+     */
+    empty_slot_init("fallback", 0, 0x80000000);
+
+    liointc = qdev_new("loongson.liointc");
+    sysbus_realize_and_unref(SYS_BUS_DEVICE(liointc), &error_fatal);
+
+    sysbus_mmio_map(SYS_BUS_DEVICE(liointc), 0, virt_memmap[VIRT_LIOINTC].base);
+
+    for (i = 0; i < machine->smp.cpus; i++) {
+        int ip;
+
+        /* init CPUs */
+        cpu = MIPS_CPU(cpu_create(machine->cpu_type));
+
+        /* Init internal devices */
+        cpu_mips_irq_init_cpu(cpu);
+        cpu_mips_clock_init(cpu);
+        qemu_register_reset(main_cpu_reset, cpu);
+
+        if (i >= 4) {
+            continue; /* Only node-0 can be connected to LIOINTC */
+        }
+
+        for (ip = 0; ip < 4 ; ip++) {
+            int pin = i * 4 + ip;
+            sysbus_connect_irq(SYS_BUS_DEVICE(liointc),
+                               pin, cpu->env.irq[ip + 2]);
+        }
+    }
+    env = &MIPS_CPU(first_cpu)->env;
+
+    /* Allocate RAM/BIOS, 0x00000000~0x10000000 is alias of 0x80000000~0x90000000 */
+    memory_region_init_rom(bios, NULL, "loongson3.bios",
+                           virt_memmap[VIRT_BIOS_ROM].size, &error_fatal);
+    memory_region_init_alias(ram, NULL, "loongson3.lowmem",
+                           machine->ram, 0, virt_memmap[VIRT_LOWMEM].size);
+    memory_region_init_io(iomem, NULL, &loongson3_pm_ops,
+                           NULL, "loongson3_pm", virt_memmap[VIRT_PM].size);
+
+    memory_region_add_subregion(address_space_mem,
+                      virt_memmap[VIRT_LOWMEM].base, ram);
+    memory_region_add_subregion(address_space_mem,
+                      virt_memmap[VIRT_BIOS_ROM].base, bios);
+    memory_region_add_subregion(address_space_mem,
+                      virt_memmap[VIRT_HIGHMEM].base, machine->ram);
+    memory_region_add_subregion(address_space_mem,
+                      virt_memmap[VIRT_PM].base, iomem);
+
+    /*
+     * We do not support flash operation, just loading bios.bin as raw BIOS.
+     * Please use -L to set the BIOS path and -bios to set bios name.
+     */
+
+    if (kernel_filename) {
+        loaderparams.cpu_freq = get_cpu_freq();
+        loaderparams.ram_size = ram_size;
+        loaderparams.kernel_filename = kernel_filename;
+        loaderparams.kernel_cmdline = kernel_cmdline;
+        loaderparams.initrd_filename = initrd_filename;
+        loaderparams.kernel_entry = load_kernel(env);
+
+        init_boot_rom();
+        init_boot_param();
+    } else {
+        if (bios_name == NULL) {
+                bios_name = LOONGSON3_BIOSNAME;
+        }
+        filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
+        if (filename) {
+            bios_size = load_image_targphys(filename,
+                                            virt_memmap[VIRT_BIOS_ROM].base,
+                                            virt_memmap[VIRT_BIOS_ROM].size);
+            g_free(filename);
+        } else {
+            bios_size = -1;
+        }
+
+        if ((bios_size < 0 || bios_size > virt_memmap[VIRT_BIOS_ROM].size) &&
+            !kernel_filename && !qtest_enabled()) {
+            error_report("Could not load MIPS bios '%s'", bios_name);
+            exit(1);
+        }
+
+        fw_conf_init(ram_size);
+    }
+
+    msi_nonbroken = true;
+    loongson3_virt_devices_init(machine, liointc);
+
+    sysbus_create_simple("goldfish_rtc", virt_memmap[VIRT_RTC].base,
+                         qdev_get_gpio_in(liointc, RTC_IRQ));
+
+    serial_mm_init(address_space_mem, virt_memmap[VIRT_UART].base, 0,
+                   qdev_get_gpio_in(liointc, UART_IRQ), 115200, serial_hd(0),
+                   DEVICE_NATIVE_ENDIAN);
+}
+
+static void mips_loongson3_virt_machine_init(MachineClass *mc)
+{
+    mc->desc = "Loongson-3 Virtualization Platform";
+    mc->init = mips_loongson3_virt_init;
+    mc->block_default_type = IF_IDE;
+    mc->max_cpus = LOONGSON_MAX_VCPUS;
+    mc->default_ram_id = "loongson3.highram";
+    mc->default_ram_size = 1600 * MiB;
+    mc->kvm_type = mips_kvm_type;
+    mc->minimum_page_bits = 14;
+}
+
+DEFINE_MACHINE("loongson3-virt", mips_loongson3_virt_machine_init)
diff --git a/hw/mips/meson.build b/hw/mips/meson.build
index 46294b7..32c8b95 100644
--- a/hw/mips/meson.build
+++ b/hw/mips/meson.build
@@ -1,6 +1,7 @@ 
 mips_ss = ss.source_set()
-mips_ss.add(files('addr.c', 'mips_int.c'))
+mips_ss.add(files('addr.c', 'mips_int.c', 'fw_cfg.c'))
 mips_ss.add(when: 'CONFIG_FULOONG', if_true: files('fuloong2e.c'))
+mips_ss.add(when: 'CONFIG_LOONGSON3V', if_true: files('loongson3_virt.c'))
 mips_ss.add(when: 'CONFIG_JAZZ', if_true: files('jazz.c'))
 mips_ss.add(when: 'CONFIG_MALTA', if_true: files('gt64xxx_pci.c', 'malta.c'))
 mips_ss.add(when: 'CONFIG_MIPSSIM', if_true: files('mipssim.c'))