From patchwork Wed May 8 02:33:49 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Julien Grall X-Patchwork-Id: 16764 Return-Path: X-Original-To: linaro@patches.linaro.org Delivered-To: linaro@patches.linaro.org Received: from mail-qe0-f72.google.com (mail-qe0-f72.google.com [209.85.128.72]) by ip-10-151-82-157.ec2.internal (Postfix) with ESMTPS id 00557238FD for ; Wed, 8 May 2013 02:35:30 +0000 (UTC) Received: by mail-qe0-f72.google.com with SMTP id 1sf1774613qee.7 for ; Tue, 07 May 2013 19:35:10 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=x-received:mime-version:x-beenthere:x-received:received-spf :x-received:x-forwarded-to:x-forwarded-for:delivered-to:x-received :received-spf:x-received:from:to:cc:subject:date:message-id:x-mailer :in-reply-to:references:x-gm-message-state:x-original-sender :x-original-authentication-results:precedence:mailing-list:list-id :x-google-group-id:list-post:list-help:list-archive:list-unsubscribe; bh=dPOwhaDSMPr/n7hNx/2u6opVouhD7gAGGX0hnegp7Zs=; b=dtgJiLIa05W8dNLCDx5Og8duwbCFzqCnGcJ/LKXznO/WrKFeJsGG1mzGlX3xgIboYB 2FwhJh7leR8d1C8tS8C6w/84EY+w0+yrxVUjfChU05AjnaKSOzF2OAX+wpGSSSpfEkAq tLJ7LLUNpt2np14ciPfWBSPHryiBQlvEsA4YNNFRr/yAe965nm9Ed4o3p0ULipTUWeWd 7OdiX09/5zWrz70RWtjxNjuTLy5uXYiwQcpmyVNTnLVe2Mi8zmGqRpp9TDqjHpsdYfbY 4jC8I5Dc/G7SdgiRLHhVk1RFl2oqAu4KLYPeX2PMcJPRT5/B6J9YthM3zD6cDA2rj/2m DFMg== X-Received: by 10.224.215.194 with SMTP id hf2mr6531621qab.0.1367980510812; Tue, 07 May 2013 19:35:10 -0700 (PDT) MIME-Version: 1.0 X-BeenThere: patchwork-forward@linaro.org Received: by 10.49.0.142 with SMTP id 14ls733168qee.91.gmail; Tue, 07 May 2013 19:35:10 -0700 (PDT) X-Received: by 10.58.143.77 with SMTP id sc13mr3188447veb.21.1367980510583; Tue, 07 May 2013 19:35:10 -0700 (PDT) Received: from mail-vb0-x233.google.com (mail-vb0-x233.google.com [2607:f8b0:400c:c02::233]) by mx.google.com with ESMTPS id ir6si14147572vdb.65.2013.05.07.19.35.10 for (version=TLSv1 cipher=ECDHE-RSA-RC4-SHA bits=128/128); Tue, 07 May 2013 19:35:10 -0700 (PDT) Received-SPF: neutral (google.com: 2607:f8b0:400c:c02::233 is neither permitted nor denied by best guess record for domain of patch+caf_=patchwork-forward=linaro.org@linaro.org) client-ip=2607:f8b0:400c:c02::233; Received: by mail-vb0-f51.google.com with SMTP id x16so1142704vbf.24 for ; Tue, 07 May 2013 19:35:10 -0700 (PDT) X-Received: by 10.58.227.104 with SMTP id rz8mr3065007vec.22.1367980510430; Tue, 07 May 2013 19:35:10 -0700 (PDT) X-Forwarded-To: patchwork-forward@linaro.org X-Forwarded-For: patch@linaro.org patchwork-forward@linaro.org Delivered-To: patches@linaro.org Received: by 10.58.127.98 with SMTP id nf2csp131032veb; Tue, 7 May 2013 19:35:09 -0700 (PDT) X-Received: by 10.180.183.76 with SMTP id ek12mr6686612wic.30.1367980509255; Tue, 07 May 2013 19:35:09 -0700 (PDT) Received: from mail-wi0-x230.google.com (mail-wi0-x230.google.com [2a00:1450:400c:c05::230]) by mx.google.com with ESMTPS id fb6si8843794wjd.68.2013.05.07.19.35.08 for (version=TLSv1 cipher=ECDHE-RSA-RC4-SHA bits=128/128); Tue, 07 May 2013 19:35:09 -0700 (PDT) Received-SPF: neutral (google.com: 2a00:1450:400c:c05::230 is neither permitted nor denied by best guess record for domain of julien.grall@linaro.org) client-ip=2a00:1450:400c:c05::230; Received: by mail-wi0-f176.google.com with SMTP id hq12so4482105wib.15 for ; Tue, 07 May 2013 19:35:08 -0700 (PDT) X-Received: by 10.180.83.199 with SMTP id s7mr6957421wiy.19.1367980508722; Tue, 07 May 2013 19:35:08 -0700 (PDT) Received: from belegaer.uk.xensource.com. (firewall.ctxuk.citrix.com. [46.33.159.2]) by mx.google.com with ESMTPSA id v6sm6823630wiy.11.2013.05.07.19.35.07 for (version=TLSv1.2 cipher=ECDHE-RSA-RC4-SHA bits=128/128); Tue, 07 May 2013 19:35:08 -0700 (PDT) From: Julien Grall To: xen-devel@lists.xen.org Cc: Stefano.Stabellini@eu.citrix.com, patches@linaro.org, ian.campbell@citrix.com, Anthony PERARD , Julien Grall Subject: [PATCH V2 29/33] xen/arm: Add exynos 4210 UART support Date: Wed, 8 May 2013 03:33:49 +0100 Message-Id: X-Mailer: git-send-email 1.7.10.4 In-Reply-To: References: X-Gm-Message-State: ALoCoQlAvHxzg0iTpsutC74C3vBaaukl2Yz1uY08LT2RkLON6+dxV/h1ONXP4rIllHp1obxX6ina X-Original-Sender: julien.grall@linaro.org X-Original-Authentication-Results: mx.google.com; spf=neutral (google.com: 2607:f8b0:400c:c02::233 is neither permitted nor denied by best guess record for domain of patch+caf_=patchwork-forward=linaro.org@linaro.org) smtp.mail=patch+caf_=patchwork-forward=linaro.org@linaro.org Precedence: list Mailing-list: list patchwork-forward@linaro.org; contact patchwork-forward+owners@linaro.org List-ID: X-Google-Group-Id: 836684582541 List-Post: , List-Help: , List-Archive: List-Unsubscribe: , From: Anthony PERARD Signed-off-by: Anthony PERARD Signed-off-by: Julien Grall Changes in v2: - Use defines where it's possible - Move UART definition in a separate header. Will be used for early UART - Replace all // by /* ... */ - Add Anthony as first author Acked-by: Ian Campbell --- config/arm32.mk | 1 + xen/drivers/char/Makefile | 1 + xen/drivers/char/exynos4210-uart.c | 357 +++++++++++++++++++++++++++++++++ xen/include/asm-arm/exynos4210-uart.h | 111 ++++++++++ 4 files changed, 470 insertions(+) create mode 100644 xen/drivers/char/exynos4210-uart.c create mode 100644 xen/include/asm-arm/exynos4210-uart.h diff --git a/config/arm32.mk b/config/arm32.mk index f64f0c1..d8e958b 100644 --- a/config/arm32.mk +++ b/config/arm32.mk @@ -8,6 +8,7 @@ CONFIG_ARM_$(XEN_OS) := y CFLAGS += -marm HAS_PL011 := y +HAS_EXYNOS4210 := y # Use only if calling $(LD) directly. #LDFLAGS_DIRECT_OpenBSD = _obsd diff --git a/xen/drivers/char/Makefile b/xen/drivers/char/Makefile index e68a54a..0edd103 100644 --- a/xen/drivers/char/Makefile +++ b/xen/drivers/char/Makefile @@ -1,6 +1,7 @@ obj-y += console.o obj-$(HAS_NS16550) += ns16550.o obj-$(HAS_PL011) += pl011.o +obj-$(HAS_EXYNOS4210) += exynos4210-uart.o obj-$(HAS_EHCI) += ehci-dbgp.o obj-$(CONFIG_ARM) += arm-uart.o obj-y += serial.o diff --git a/xen/drivers/char/exynos4210-uart.c b/xen/drivers/char/exynos4210-uart.c new file mode 100644 index 0000000..5cde0f6 --- /dev/null +++ b/xen/drivers/char/exynos4210-uart.c @@ -0,0 +1,357 @@ +/* + * xen/drivers/char/exynos4210-uart.c + * + * Driver for Exynos 4210 UART. + * + * Anthony PERARD + * Copyright (c) 2012 Citrix Systems. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct exynos4210_uart { + unsigned int baud, clock_hz, data_bits, parity, stop_bits; + struct dt_irq irq; + volatile unsigned char *regs; + struct irqaction irqaction; +} exynos4210_com[2] = {{0}}; + +/* These parity settings can be ORed directly into the ULCON. */ +#define PARITY_NONE (0) +#define PARITY_ODD (0x4) +#define PARITY_EVEN (0x5) +#define FORCED_CHECKED_AS_ONE (0x6) +#define FORCED_CHECKED_AS_ZERO (0x7) + +static inline uint32_t exynos4210_read(const struct exynos4210_uart *uart, + size_t offset) +{ + return *(uint32_t *)(uart->regs + offset); +} + +static inline void exynos4210_write(const struct exynos4210_uart *uart, + size_t offset, uint32_t value) +{ + *(uint32_t *)(uart->regs + offset) = value; +} + +static void exynos4210_uart_interrupt(int irq, void *data, struct cpu_user_regs *regs) +{ + struct serial_port *port = data; + struct exynos4210_uart *uart = port->uart; + unsigned int status; + + status = exynos4210_read(uart, UINTP); + + while ( status != 0 ) + { + /* Clear all pending interrupts + * but should take care of ERROR and MODEM + */ + + if ( status & UINTM_ERROR ) + { + uint32_t error_bit; + + error_bit = exynos4210_read(uart, UERSTAT); + + if ( error_bit & UERSTAT_OVERRUN ) + dprintk(XENLOG_ERR, "uart: overrun error\n"); + if ( error_bit & UERSTAT_PARITY ) + dprintk(XENLOG_ERR, "uart: parity error\n"); + if ( error_bit & UERSTAT_FRAME ) + dprintk(XENLOG_ERR, "uart: frame error\n"); + if ( error_bit & UERSTAT_BREAK ) + dprintk(XENLOG_ERR, "uart: break detected\n"); + /* Clear error pending interrupt */ + exynos4210_write(uart, UINTP, UINTM_ERROR); + } + + + if ( status & (UINTM_RXD | UINTM_ERROR) ) + { + /* uart->regs[UINTM] |= RXD|ERROR; */ + serial_rx_interrupt(port, regs); + /* uart->regs[UINTM] &= ~(RXD|ERROR); */ + exynos4210_write(uart, UINTP, UINTM_RXD | UINTM_ERROR); + } + + if ( status & (UINTM_TXD | UINTM_MODEM) ) + { + /* uart->regs[UINTM] |= TXD|MODEM; */ + serial_tx_interrupt(port, regs); + /* uart->regs[UINTM] &= ~(TXD|MODEM); */ + exynos4210_write(uart, UINTP, UINTM_TXD | UINTM_MODEM); + } + + status = exynos4210_read(uart, UINTP); + } +} + +static void __init exynos4210_uart_init_preirq(struct serial_port *port) +{ + struct exynos4210_uart *uart = port->uart; + unsigned int divisor; + uint32_t ulcon; + + /* reset, TX/RX disables */ + exynos4210_write(uart, UCON, 0); + + /* No Interrupt, auto flow control */ + exynos4210_write(uart, UMCON, 0); + + /* Line control and baud-rate generator. */ + if ( uart->baud != BAUD_AUTO ) + { + /* Baud rate specified: program it into the divisor latch. */ + divisor = ((uart->clock_hz) / (uart->baud)) - 1; + /* FIXME: will use a hacked divisor, assuming the src clock and bauds */ + exynos4210_write(uart, UFRACVAL, 53); + exynos4210_write(uart, UBRDIV, 4); + } + else + { + /* TODO: should be updated */ + /* Baud rate already set: read it out from the divisor latch. */ +#if 0 + divisor = (uart->regs[IBRD] << 6) | uart->regs[FBRD]; + uart->baud = (uart->clock_hz << 2) / divisor; +#endif + } + + /* + * Number of bits per character + * 0 => 5 bits + * 1 => 6 bits + * 2 => 7 bits + * 3 => 8 bits + */ + ASSERT(uart->data_bits >= 5 && uart->data_bits <= 8); + ulcon = (uart->data_bits - 5); + + /* + * Stop bits + * 0 => 1 stop bit per frame + * 1 => 2 stop bit per frame + */ + ASSERT(uart->stop_bits >= 1 && uart->stop_bits <= 2); + ulcon |= (uart->stop_bits - 1) << ULCON_STOPB_SHIFT; + + + /* Parity */ + ulcon |= uart->parity << ULCON_PARITY_SHIFT; + + exynos4210_write(uart, ULCON, ulcon); + + /* Mask and clear the interrupts */ + exynos4210_write(uart, UINTM, UINTM_ALLI); + exynos4210_write(uart, UINTP, UINTM_ALLI); + + /* reset FIFO */ + exynos4210_write(uart, UFCON, UFCON_FIFO_RESET); + + /* TODO: Add timeout to avoid infinite loop */ + while ( exynos4210_read(uart, UFCON) & UFCON_FIFO_RESET ) + ; + + /* + * Enable FIFO and set the trigger level of Tx FIFO + * The trigger level is always set to b101, an interrupt will be + * generated when data count of Tx FIFO is less than or equal to the + * following value: + * UART0 => 160 bytes + * UART1 => 40 bytes + * UART2 => 10 bytes + * UART3 => 10 bytes + */ + exynos4210_write(uart, UFCON, UFCON_FIFO_TX_TRIGGER | UFCON_FIFO_EN); + + /* + * Enable the UART for Rx and Tx + * - Use only interrupt request + * - Interrupts are level trigger + * - Enable Rx timeout + */ + exynos4210_write(uart, UCON, + UCON_RX_IRQ_LEVEL | UCON_TX_IRQ_LEVEL | UCON_RX_IRQ | + UCON_TX_IRQ | UCON_RX_TIMEOUT); +} + +static void __init exynos4210_uart_init_postirq(struct serial_port *port) +{ + struct exynos4210_uart *uart = port->uart; + int rc; + + uart->irqaction.handler = exynos4210_uart_interrupt; + uart->irqaction.name = "exynos4210_uart"; + uart->irqaction.dev_id = port; + + if ( (rc = setup_dt_irq(&uart->irq, &uart->irqaction)) != 0 ) + dprintk(XENLOG_ERR, "Failed to allocated exynos4210_uart IRQ %d\n", + uart->irq.irq); + + /* Unmask interrupts */ + exynos4210_write(uart, UINTM, ~UINTM_ALLI); + + /* Clear pending interrupts */ + exynos4210_write(uart, UINTP, UINTM_ALLI); + + /* Enable interrupts */ + exynos4210_write(uart, UMCON, exynos4210_read(uart, UMCON) | UMCON_INT_EN); +} + +static void exynos4210_uart_suspend(struct serial_port *port) +{ + BUG(); // XXX +} + +static void exynos4210_uart_resume(struct serial_port *port) +{ + BUG(); // XXX +} + +static unsigned int exynos4210_uart_tx_ready(struct serial_port *port) +{ + struct exynos4210_uart *uart = port->uart; + + /* Tx fifo full ? */ + if ( exynos4210_read(uart, UFSTAT) & UFSTAT_TX_FULL ) + return 0; + else + { + uint32_t val = exynos4210_read(uart, UFSTAT); + + val = (val & UFSTAT_TX_COUNT_MASK) >> UFSTAT_TX_COUNT_SHIFT; + + /* XXX: Here we assume that we use UART 2/3, on the others + * UART the buffer is bigger + */ + ASSERT(val >= 0 && val <= FIFO_MAX_SIZE); + + return (FIFO_MAX_SIZE - val); + } +} + +static void exynos4210_uart_putc(struct serial_port *port, char c) +{ + struct exynos4210_uart *uart = port->uart; + + exynos4210_write(uart, UTXH, (uint32_t)(unsigned char)c); +} + +static int exynos4210_uart_getc(struct serial_port *port, char *pc) +{ + struct exynos4210_uart *uart = port->uart; + uint32_t ufstat = exynos4210_read(uart, UFSTAT); + uint32_t count; + + count = (ufstat & UFSTAT_RX_COUNT_MASK) >> UFSTAT_RX_COUNT_SHIFT; + + /* Check if Rx fifo is full or if the is something in it */ + if ( ufstat & UFSTAT_RX_FULL || count ) + { + *pc = exynos4210_read(uart, URXH) & URXH_DATA_MASK; + return 1; + } + else + return 0; +} + +static int __init exynos4210_uart_irq(struct serial_port *port) +{ + struct exynos4210_uart *uart = port->uart; + + return uart->irq.irq; +} + +static const struct dt_irq __init *exynos4210_uart_dt_irq(struct serial_port *port) +{ + struct exynos4210_uart *uart = port->uart; + + return &uart->irq; +} + +static struct uart_driver __read_mostly exynos4210_uart_driver = { + .init_preirq = exynos4210_uart_init_preirq, + .init_postirq = exynos4210_uart_init_postirq, + .endboot = NULL, + .suspend = exynos4210_uart_suspend, + .resume = exynos4210_uart_resume, + .tx_ready = exynos4210_uart_tx_ready, + .putc = exynos4210_uart_putc, + .getc = exynos4210_uart_getc, + .irq = exynos4210_uart_irq, + .dt_irq_get = exynos4210_uart_dt_irq, +}; + +static int __init exynos4210_uart_init(struct dt_device_node *dev, + const void *data) +{ + const struct serial_arm_defaults *defaults = data; + struct exynos4210_uart *uart; + int res; + + if ( (defaults->index < 0) || (defaults->index > 1) ) + return -EINVAL; + + uart = &exynos4210_com[defaults->index]; + + /* uart->clock_hz = 0x16e3600; */ + uart->baud = BAUD_AUTO;//115200; + uart->data_bits = 8; + uart->parity = PARITY_NONE; + uart->stop_bits = 1; + uart->regs = (unsigned char *)defaults->register_base_address; + + res = dt_device_get_irq(dev, 0, &uart->irq); + if ( res ) + { + early_printk("exynos4210: Unable to retrieve the IRQ\n"); + return res; + } + + /* Register with generic serial driver. */ + serial_register_uart(uart - exynos4210_com, &exynos4210_uart_driver, uart); + + dt_device_set_used_by(dev, DT_USED_BY_XEN); + + return 0; +} + +static const char const *exynos4210_dt_compat[] __initdata = +{ + "samsung,exynos4210-uart", + NULL +}; + +DT_DEVICE_START(exynos4210, "Exynos 4210 UART", DEVICE_SERIAL) + .compatible = exynos4210_dt_compat, + .init = exynos4210_uart_init, +DT_DEVICE_END + +/* + * Local variables: + * mode: C + * c-file-style: "BSD" + * c-basic-offset: 4 + * indent-tabs-mode: nil + * End: + */ diff --git a/xen/include/asm-arm/exynos4210-uart.h b/xen/include/asm-arm/exynos4210-uart.h new file mode 100644 index 0000000..1527521 --- /dev/null +++ b/xen/include/asm-arm/exynos4210-uart.h @@ -0,0 +1,111 @@ +/* + * xen/include/asm-arm/exynos4210-uart.h + * + * Common constant definition between ealry printk and the UART driver + * for the exynos 4210 UART + * + * Julien Grall + * Copyright (c) 2013 Linaro Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARM_EXYNOS4210_H +#define __ASM_ARM_EXYNOS4210_H + + +/* + * this value is only valid for UART 2 and UART 3 + * XXX: define per UART + */ +#define FIFO_MAX_SIZE 16 + +/* register addresses */ +#define ULCON (0x00) +#define UCON (0x04) +#define UFCON (0x08) +#define UMCON (0x0c) +#define UTRSTAT (0x10) +#define UERSTAT (0x14) +#define UFSTAT (0x18) +#define UMSTAT (0x1c) +#define UTXH (0x20) +#define URXH (0x24) +#define UBRDIV (0x28) +#define UFRACVAL (0x2c) +#define UINTP (0x30) +#define UINTS (0x34) +#define UINTM (0x38) + +/* UCON */ +#define UCON_RX_IRQ (1 << 0) +#define UCON_TX_IRQ (1 << 2) +#define UCON_RX_TIMEOUT (1 << 7) + +/* + * FIXME: IRQ_LEVEL should be 1 << n but with this value, the IRQ + * handler will never end... + */ +#define UCON_RX_IRQ_LEVEL (0 << 8) +#define UCON_TX_IRQ_LEVEL (0 << 9) + +/* ULCON */ +#define ULCON_STOPB_SHIFT 2 +#define ULCON_PARITY_SHIFT 3 + +/* UFCON */ +#define UFCON_FIFO_TX_RESET (1 << 2) +#define UFCON_FIFO_RX_RESET (1 << 1) +#define UFCON_FIFO_RESET (UFCON_FIFO_TX_RESET | UFCON_FIFO_RX_RESET) +#define UFCON_FIFO_EN (1 << 0) + +#define UFCON_FIFO_TX_TRIGGER (0x6 << 8) + +/* UMCON */ +#define UMCON_INT_EN (1 << 3) + +/* UERSTAT */ +#define UERSTAT_OVERRUN (1 << 0) +#define UERSTAT_PARITY (1 << 1) +#define UERSTAT_FRAME (1 << 2) +#define UERSTAT_BREAK (1 << 3) + +/* UFSTAT */ +#define UFSTAT_TX_FULL (1 << 24) +#define UFSTAT_TX_COUNT_SHIFT (16) +#define UFSTAT_TX_COUNT_MASK (0xff << UFSTAT_TX_COUNT_SHIFT) +#define UFSTAT_RX_FULL (1 << 8) +#define UFSTAT_RX_COUNT_SHIFT (0) +#define UFSTAT_RX_COUNT_MASK (0xff << UFSTAT_RX_COUNT_SHIFT) + +/* UTRSTAT */ +#define UTRSTAT_TX_EMPTY (1 << 1) + +/* URHX */ +#define URXH_DATA_MASK (0xff) + +/* Interrupt bits (UINTP, UINTS, UINTM) */ +#define UINTM_MODEM (1 << 3) +#define UINTM_TXD (1 << 2) +#define UINTM_ERROR (1 << 1) +#define UINTM_RXD (1 << 0) +#define UINTM_ALLI (UINTM_MODEM | UINTM_TXD | UINTM_ERROR | UINTM_RXD) + +#endif /* __ASM_ARM_EXYNOS4210_H */ + +/* + * Local variables: + * mode: C + * c-file-style: "BSD" + * c-basic-offset: 4 + * indent-tabs-mode: nil + * End: + */