@@ -61,4 +61,30 @@
# define HAVE_CALL_INDIRECT
#endif
+/* A and R profiles (and legacy Arm).
+ Current Program Status Register (CPSR)
+ M[4:0] Mode bits. M[4] is always 1 for 32-bit modes.
+ T[5] 1: Thumb, 0: ARM instruction set
+ F[6] 1: disables FIQ
+ I[7] 1: disables IRQ
+ A[8] 1: disables imprecise aborts
+ E[9] 0: Little-endian, 1: Big-endian
+ J[24] 1: Jazelle instruction set
+ */
+#define CPSR_M_USR 0x00 /* User mode. */
+#define CPSR_M_FIQ 0x01 /* Fast Interrupt mode. */
+#define CPSR_M_IRQ 0x02 /* Interrupt mode. */
+#define CPSR_M_SVR 0x03 /* Supervisor mode. */
+#define CPSR_M_MON 0x06 /* Monitor mode. */
+#define CPSR_M_ABT 0x07 /* Abort mode. */
+#define CPSR_M_HYP 0x0A /* Hypervisor mode. */
+#define CPSR_M_UND 0x0B /* Undefined mode. */
+#define CPSR_M_SYS 0x0F /* System mode. */
+#define CPSR_M_32BIT 0x10 /* 32-bit mode. */
+#define CPSR_T_BIT 0x20 /* Thumb bit. */
+#define CPSR_F_MASK 0x40 /* FIQ bit. */
+#define CPSR_I_MASK 0x80 /* IRQ bit. */
+
+#define CPSR_M_MASK 0x0F /* Mode mask except M[4]. */
+
#endif /* _LIBGLOSS_ARM_H */
@@ -59,6 +59,21 @@
.endm
#endif
+/* Annotation for EABI unwinding tables. */
+.macro FN_EH_START
+#if defined(__ELF__) && !defined(__USING_SJLJ_EXCEPTIONS__)
+ .fnstart
+#endif
+.endm
+
+.macro FN_EH_END
+#if defined(__ELF__) && !defined(__USING_SJLJ_EXCEPTIONS__)
+ /* Protect against unhandled exceptions. */
+ .cantunwind
+ .fnend
+#endif
+.endm
+
.macro indirect_call reg
#ifdef HAVE_CALL_INDIRECT
blx \reg
@@ -68,16 +83,170 @@
#endif
.endm
+/* For armv4t and newer, toolchains will transparently convert
+ 'bx lr' to 'mov pc, lr' if needed. GCC has deprecated support
+ for anything older than armv4t, but this should handle that
+ corner case in case anyone needs it anyway. */
+.macro FN_RETURN
+#if __ARM_ARCH <= 4 && __ARM_ARCH_ISA_THUMB == 0
+ mov pc, lr
+#else
+ bx lr
+#endif
+.endm
+
+
+
+/******************************************************************************
+* User mode only: This routine makes default target specific Stack
+* +-----+ <- SL_sys, Pointer initialization for different processor modes:
+* | | SL_usr FIQ, Abort, IRQ, Undefined, Supervisor, System (User)
+* | SYS | and setups a default Stack Limit in-case the code has
+* | USR | -=0x10000 been compiled with "-mapcs-stack-check" for FIQ and
+* | | System (User) modes.
+* | |
+* +-----+ <- initial SP,
+* becomes SP_sys Hard-wiring SL value is not ideal, since there is
+* and SL_usr currently no support for checking that the heap and
+* stack have not collided, or that this default 64k is
+* All modes: is enough for the program being executed. However,
+* +-----+ <- SL_sys, it ensures that this simple crt0 world will not
+* | | SL_usr immediately cause an overflow event.
+* | SYS |
+* | USR | -=0x10000 We go through all execution modes and set up SP
+* | | for each of them.
+* +-----+ <- SP_sys,
+* | | SP_usr Note:
+* | SVC | -= 0x8000 Mode switch via CPSR is not allowed once in
+* | | non-privileged mode, so we take care not to enter
+* +-----+ <- SP_svc "User" to set up its sp, and also skip most
+* | | operations if already in that mode.
+* | IRQ | -= 0x2000
+* | | Input parameters:
+* ^ +-----+ <- SP_und - sp - Initialized SP
+* s | | - r2 - May contain SL value from semihosting
+* t | UND | -= 0x1000 SYS_HEAPINFO call
+* a | | Scratch registers:
+* c +-----+ <- SP_und - r1 - new value of CPSR
+* k | | - r2 - intermediate value (in standalone mode)
+* | ABT | -= 0x1000 - r3 - new SP value
+* g | | - r4 - save/restore CPSR on entry/exit
+* r +-----+ <- SP_abt,
+* o | | SL_fiq Declared as "weak" so that user can write and use
+* w | FIQ | -= 0x1000 his own implementation if current doesn't fit.
+* t | |
+* h +-----+ <- initial SP,
+* becomes SP_fiq
+*
+******************************************************************************/
+ .align 0
+ FUNC_START _stack_init
+ .weak FUNCTION (_stack_init)
+ FN_EH_START
+
+ /* M profile doesn't have CPSR register. */
+#if (__ARM_ARCH_PROFILE != 'M')
+ /* Following code is compatible for both ARM and Thumb ISA. */
+ mrs r4, CPSR
+ /* Test mode bits - in User of all are 0. */
+ tst r4, #(CPSR_M_MASK)
+ /* "eq" means r4 AND #0x0F is 0. */
+ beq .Lskip_cpu_modes
+
+ mov r3, sp /* Save input SP value. */
+
+ /* FIQ mode, interrupts disabled. */
+ mov r1, #(CPSR_M_FIQ|CPSR_M_32BIT|CPSR_I_MASK|CPSR_F_MASK)
+ msr CPSR_c, r1
+ mov sp, r3
+ sub sl, sp, #0x1000 /* FIQ mode has its own SL. */
+
+ /* Abort mode, interrupts disabled. */
+ mov r3, sl
+ mov r1, #(CPSR_M_ABT|CPSR_M_32BIT|CPSR_I_MASK|CPSR_F_MASK)
+ msr CPSR_c, r1
+ mov sp, r3
+ sub r3, r3, #0x1000
+
+ /* Undefined mode, interrupts disabled. */
+ mov r1, #(CPSR_M_UND|CPSR_M_32BIT|CPSR_I_MASK|CPSR_F_MASK)
+ msr CPSR_c, r1
+ mov sp, r3
+ sub r3, r3, #0x1000
+
+ /* IRQ mode, interrupts disabled. */
+ mov r1, #(CPSR_M_IRQ|CPSR_M_32BIT|CPSR_I_MASK|CPSR_F_MASK)
+ msr CPSR_c, r1
+ mov sp, r3
+ sub r3, r3, #0x2000
+
+ /* Supervisory mode, interrupts disabled. */
+ mov r1, #(CPSR_M_SVR|CPSR_M_32BIT|CPSR_I_MASK|CPSR_F_MASK)
+ msr CPSR_c, r1
+ mov sp, r3
+
+ sub r3, r3, #0x8000 /* Min size 32k. */
+ bic r3, r3, #0x00FF /* Align with current 64k block. */
+ bic r3, r3, #0xFF00
+
+# if __ARM_ARCH >= 4
+ /* System (shares regs with User) mode, interrupts disabled. */
+ mov r1, #(CPSR_M_SYS|CPSR_M_32BIT|CPSR_I_MASK|CPSR_F_MASK)
+ msr CPSR_c, r1
+ mov sp, r3
+# else
+ /* Keep this for ARMv3, but GCC actually dropped it. */
+ /* Move value into user mode sp without changing modes, */
+ /* via '^' form of ldm. */
+ str r3, [r3, #-4]
+ ldmdb r3, {sp}^
+# endif
+
+ /* Back to original mode, presumably SVC, with diabled FIQ/IRQ. */
+ orr r4, r4, #(CPSR_I_MASK|CPSR_F_MASK)
+ msr CPSR_c, r4
+
+.Lskip_cpu_modes:
+#endif
+
+ /* Set SL register. */
+#if defined (ARM_RDI_MONITOR) /* semihosting */
+ cmp r2, #0
+ beq .Lsl_forced_zero
+ /* Allow slop for stack overflow handling and small frames. */
+# ifdef THUMB1_ONLY
+ adds r2, #128
+ adds r2, #128
+ mov sl, r2
+# else
+ add sl, r2, #256
+# endif
+.Lsl_forced_zero:
+
+#else /* standalone */
+ /* r3 contains SP for System/User mode. Set SL = SP - 0x10000. */
+ #ifdef THUMB1_ONLY
+ movs r2, #64
+ lsls r2, r2, #10
+ subs r2, r3, r2
+ mov sl, r2
+ #else
+ /* Still assumes 256bytes below SL. */
+ sub sl, r3, #64 << 10
+ #endif
+#endif
+
+ FN_RETURN
+ FN_EH_END
+
+
/*******************************************************************************
* Main library startup code.
*******************************************************************************/
.align 0
FUNC_START _mainCRTStartup
FUNC_START _start
-#if defined(__ELF__) && !defined(__USING_SJLJ_EXCEPTIONS__)
- /* Annotation for EABI unwinding tables. */
- .fnstart
-#endif
+ FN_EH_START
/* __ARM_ARCH_PROFILE is defined from GCC 4.8 onwards, however __ARM_ARCH_7A
has been defined since 4.2 onwards, which is when v7-a support was added
@@ -144,42 +313,33 @@
.LC32:
ldr r1, [r0, #8]
ldr r2, [r0, #12]
- /* We skip setting sp/sl if 0 returned from semihosting.
+ /* We skip setting SP/SL if 0 returned from semihosting.
- According to semihosting docs, if 0 returned from semihosting,
the system was unable to calculate the real value, so it's ok
- to skip setting sp/sl to 0 here.
+ to skip setting SP/SL to 0 here.
- Considering M-profile processors, We might want to initialize
sp by the first entry of vector table and return 0 to SYS_HEAPINFO
- semihosting call, which will be skipped here. */
+ semihosting call, which will be skipped here.
+ - Considering R-profile processors there is no automatic SP init by hardware
+ so we need to initialize it by default value. */
+ ldr r3, .Lstack
cmp r1, #0
beq .LC26
- mov sp, r1
+ mov r3, r1
.LC26:
- cmp r2, #0
- beq .LC27
+ mov sp, r3
- /* Allow slop for stack overflow handling and small frames. */
-#ifdef THUMB1_ONLY
- adds r2, #128
- adds r2, #128
- mov sl, r2
-#else
- add sl, r2, #256
-#endif
+ /* r2 (SL value) will be used in _stack_init. */
+ bl FUNCTION (_stack_init)
-.LC27:
-#else
- /* Set up the stack pointer to a fixed value. */
+
+#else /* standalone */
+ /* Set up the stack pointer to a fixed value. */
/* Changes by toralf:
- Allow linker script to provide stack via __stack symbol - see
defintion of .Lstack
- Provide "hooks" that may be used by the application to add
- custom init code - see .Lhwinit and .Lswinit
- - Go through all execution modes and set up stack for each of them.
- Loosely based on init.s from ARM/Motorola example code.
- Note: Mode switch via CPSR is not allowed once in non-privileged
- mode, so we take care not to enter "User" to set up its sp,
- and also skip most operations if already in that mode. */
+ custom init code - see .Lhwinit and .Lswinit. */
ldr r3, .Lstack
cmp r3, #0
@@ -198,57 +358,10 @@
have somehow missed it below (in which case it gets the same
value as FIQ - not ideal, but better than nothing). */
mov sp, r3
-#ifdef PREFER_THUMB
- /* XXX Fill in stack assignments for interrupt modes. */
-#else
- mrs r2, CPSR
- tst r2, #0x0F /* Test mode bits - in User of all are 0. */
- beq .LC23 /* "eq" means r2 AND #0x0F is 0. */
- msr CPSR_c, #0xD1 /* FIRQ mode, interrupts disabled. */
- mov sp, r3
- sub sl, sp, #0x1000 /* This mode also has its own sl (see below). */
-
- mov r3, sl
- msr CPSR_c, #0xD7 /* Abort mode, interrupts disabled. */
- mov sp, r3
- sub r3, r3, #0x1000
-
- msr CPSR_c, #0xDB /* Undefined mode, interrupts disabled. */
- mov sp, r3
- sub r3, r3, #0x1000
-
- msr CPSR_c, #0xD2 /* IRQ mode, interrupts disabled. */
- mov sp, r3
- sub r3, r3, #0x2000
-
- msr CPSR_c, #0xD3 /* Supervisory mode, interrupts disabled. */
- mov sp, r3
- sub r3, r3, #0x8000 /* Min size 32k. */
- bic r3, r3, #0x00FF /* Align with current 64k block. */
- bic r3, r3, #0xFF00
+ /* We don't care of r2 value in standalone. */
+ bl FUNCTION (_stack_init)
- str r3, [r3, #-4] /* Move value into user mode sp without */
- ldmdb r3, {sp}^ /* changing modes, via '^' form of ldm. */
- orr r2, r2, #0xC0 /* Back to original mode, presumably SVC, */
- msr CPSR_c, r2 /* with FIQ/IRQ disable bits forced to 1. */
-#endif
-.LC23:
- /* Setup a default stack-limit in-case the code has been
- compiled with "-mapcs-stack-check". Hard-wiring this value
- is not ideal, since there is currently no support for
- checking that the heap and stack have not collided, or that
- this default 64k is enough for the program being executed.
- However, it ensures that this simple crt0 world will not
- immediately cause an overflow event: */
-#ifdef THUMB1_ONLY
- movs r2, #64
- lsls r2, r2, #10
- subs r2, r3, r2
- mov sl, r2
-#else
- sub sl, r3, #64 << 10 /* Still assumes 256bytes below sl. */
-#endif
#endif
#endif
/* Zero the memory in the .bss section. */
@@ -447,6 +560,8 @@ change_back:
swi SWI_Exit
#endif
+ FN_EH_END
+
/* For Thumb, constants must be after the code since only
positive offsets are supported for PC relative addresses. */
.align 0
@@ -464,9 +579,6 @@ change_back:
#else
.word 0x80000 /* Top of RAM on the PIE board. */
#endif
-
-.Lstack:
- .word __stack
.Lhwinit:
.word FUNCTION (hardware_init_hook)
.Lswinit:
@@ -479,17 +591,16 @@ change_back:
and only if, a normal version of the same symbol isn't provided
e.g. by a linker script or another object file.) */
- .weak __stack
.weak FUNCTION (hardware_init_hook)
.weak FUNCTION (software_init_hook)
#endif
#endif
-#if defined(__ELF__) && !defined(__USING_SJLJ_EXCEPTIONS__)
- /* Protect against unhandled exceptions. */
- .cantunwind
- .fnend
-#endif
+
+.Lstack:
+ .word __stack
+ .weak __stack
+
.LC1:
.word __bss_start__
.LC2:
@@ -61,4 +61,30 @@
# define HAVE_CALL_INDIRECT
#endif
+/* A and R profiles (and legacy Arm).
+ Current Program Status Register (CPSR)
+ M[4:0] Mode bits. M[4] is always 1 for 32-bit modes.
+ T[5] 1: Thumb, 0: ARM instruction set
+ F[6] 1: disables FIQ
+ I[7] 1: disables IRQ
+ A[8] 1: disables imprecise aborts
+ E[9] 0: Little-endian, 1: Big-endian
+ J[24] 1: Jazelle instruction set
+ */
+#define CPSR_M_USR 0x00 /* User mode. */
+#define CPSR_M_FIQ 0x01 /* Fast Interrupt mode. */
+#define CPSR_M_IRQ 0x02 /* Interrupt mode. */
+#define CPSR_M_SVR 0x03 /* Supervisor mode. */
+#define CPSR_M_MON 0x06 /* Monitor mode. */
+#define CPSR_M_ABT 0x07 /* Abort mode. */
+#define CPSR_M_HYP 0x0A /* Hypervisor mode. */
+#define CPSR_M_UND 0x0B /* Undefined mode. */
+#define CPSR_M_SYS 0x0F /* System mode. */
+#define CPSR_M_32BIT 0x10 /* 32-bit mode. */
+#define CPSR_T_BIT 0x20 /* Thumb bit. */
+#define CPSR_F_MASK 0x40 /* FIQ bit. */
+#define CPSR_I_MASK 0x80 /* IRQ bit. */
+
+#define CPSR_M_MASK 0x0F /* Mode mask except M[4] */
+
#endif /* _LIBGLOSS_ARM_H */
@@ -59,6 +59,21 @@
.endm
#endif
+/* Annotation for EABI unwinding tables. */
+.macro FN_EH_START
+#if defined(__ELF__) && !defined(__USING_SJLJ_EXCEPTIONS__)
+ .fnstart
+#endif
+.endm
+
+.macro FN_EH_END
+#if defined(__ELF__) && !defined(__USING_SJLJ_EXCEPTIONS__)
+ /* Protect against unhandled exceptions. */
+ .cantunwind
+ .fnend
+#endif
+.endm
+
.macro indirect_call reg
#ifdef HAVE_CALL_INDIRECT
blx \reg
@@ -68,16 +83,170 @@
#endif
.endm
+/* For armv4t and newer, toolchains will transparently convert
+ 'bx lr' to 'mov pc, lr' if needed. GCC has deprecated support
+ for anything older than armv4t, but this should handle that
+ corner case in case anyone needs it anyway. */
+.macro FN_RETURN
+#if __ARM_ARCH <= 4 && __ARM_ARCH_ISA_THUMB == 0
+ mov pc, lr
+#else
+ bx lr
+#endif
+.endm
+
+
+
+/******************************************************************************
+* User mode only: This routine makes default target specific Stack
+* +-----+ <- SL_sys, Pointer initialization for different processor modes:
+* | | SL_usr FIQ, Abort, IRQ, Undefined, Supervisor, System (User)
+* | SYS | and setups a default Stack Limit in-case the code has
+* | USR | -=0x10000 been compiled with "-mapcs-stack-check" for FIQ and
+* | | System (User) modes.
+* | |
+* +-----+ <- initial SP,
+* becomes SP_sys Hard-wiring SL value is not ideal, since there is
+* and SL_usr currently no support for checking that the heap and
+* stack have not collided, or that this default 64k is
+* All modes: is enough for the program being executed. However,
+* +-----+ <- SL_sys, it ensures that this simple crt0 world will not
+* | | SL_usr immediately cause an overflow event.
+* | SYS |
+* | USR | -=0x10000 We go through all execution modes and set up SP
+* | | for each of them.
+* +-----+ <- SP_sys,
+* | | SP_usr Note:
+* | SVC | -= 0x8000 Mode switch via CPSR is not allowed once in
+* | | non-privileged mode, so we take care not to enter
+* +-----+ <- SP_svc "User" to set up its sp, and also skip most
+* | | operations if already in that mode.
+* | IRQ | -= 0x2000
+* | | Input parameters:
+* ^ +-----+ <- SP_und - sp - Initialized SP
+* s | | - r2 - May contain SL value from semihosting
+* t | UND | -= 0x1000 SYS_HEAPINFO call
+* a | | Scratch registers:
+* c +-----+ <- SP_und - r1 - new value of CPSR
+* k | | - r2 - intermediate value (in standalone mode)
+* | ABT | -= 0x1000 - r3 - new SP value
+* g | | - r4 - save/restore CPSR on entry/exit
+* r +-----+ <- SP_abt,
+* o | | SL_fiq Declared as "weak" so that user can write and use
+* w | FIQ | -= 0x1000 his own implementation if current doesn't fit.
+* t | |
+* h +-----+ <- initial SP,
+* becomes SP_fiq
+*
+******************************************************************************/
+ .align 0
+ FUNC_START _stack_init
+ .weak FUNCTION (_stack_init)
+ FN_EH_START
+
+ /* M profile doesn't have CPSR register. */
+#if (__ARM_ARCH_PROFILE != 'M')
+ /* Following code is compatible for both ARM and Thumb ISA. */
+ mrs r4, CPSR
+ /* Test mode bits - in User of all are 0. */
+ tst r4, #(CPSR_M_MASK)
+ /* "eq" means r4 AND #0x0F is 0. */
+ beq .Lskip_cpu_modes
+
+ mov r3, sp /* Save input SP value. */
+
+ /* FIQ mode, interrupts disabled. */
+ mov r1, #(CPSR_M_FIQ|CPSR_M_32BIT|CPSR_I_MASK|CPSR_F_MASK)
+ msr CPSR_c, r1
+ mov sp, r3
+ sub sl, sp, #0x1000 /* FIQ mode has its own SL. */
+
+ /* Abort mode, interrupts disabled. */
+ mov r3, sl
+ mov r1, #(CPSR_M_ABT|CPSR_M_32BIT|CPSR_I_MASK|CPSR_F_MASK)
+ msr CPSR_c, r1
+ mov sp, r3
+ sub r3, r3, #0x1000
+
+ /* Undefined mode, interrupts disabled. */
+ mov r1, #(CPSR_M_UND|CPSR_M_32BIT|CPSR_I_MASK|CPSR_F_MASK)
+ msr CPSR_c, r1
+ mov sp, r3
+ sub r3, r3, #0x1000
+
+ /* IRQ mode, interrupts disabled. */
+ mov r1, #(CPSR_M_IRQ|CPSR_M_32BIT|CPSR_I_MASK|CPSR_F_MASK)
+ msr CPSR_c, r1
+ mov sp, r3
+ sub r3, r3, #0x2000
+
+ /* Supervisory mode, interrupts disabled. */
+ mov r1, #(CPSR_M_SVR|CPSR_M_32BIT|CPSR_I_MASK|CPSR_F_MASK)
+ msr CPSR_c, r1
+ mov sp, r3
+
+ sub r3, r3, #0x8000 /* Min size 32k. */
+ bic r3, r3, #0x00FF /* Align with current 64k block. */
+ bic r3, r3, #0xFF00
+
+# if __ARM_ARCH >= 4
+ /* System (shares regs with User) mode, interrupts disabled. */
+ mov r1, #(CPSR_M_SYS|CPSR_M_32BIT|CPSR_I_MASK|CPSR_F_MASK)
+ msr CPSR_c, r1
+ mov sp, r3
+# else
+ /* Keep this for ARMv3, but GCC actually dropped it. */
+ /* Move value into user mode sp without changing modes, */
+ /* via '^' form of ldm. */
+ str r3, [r3, #-4]
+ ldmdb r3, {sp}^
+# endif
+
+ /* Back to original mode, presumably SVC, with diabled FIQ/IRQ. */
+ orr r4, r4, #(CPSR_I_MASK|CPSR_F_MASK)
+ msr CPSR_c, r4
+
+.Lskip_cpu_modes:
+#endif
+
+ /* Set SL register. */
+#if defined (ARM_RDI_MONITOR) /* semihosting */
+ cmp r2, #0
+ beq .Lsl_forced_zero
+ /* Allow slop for stack overflow handling and small frames. */
+# ifdef THUMB1_ONLY
+ adds r2, #128
+ adds r2, #128
+ mov sl, r2
+# else
+ add sl, r2, #256
+# endif
+.Lsl_forced_zero:
+
+#else /* standalone */
+ /* r3 contains SP for System/User mode. Set SL = SP - 0x10000. */
+ #ifdef THUMB1_ONLY
+ movs r2, #64
+ lsls r2, r2, #10
+ subs r2, r3, r2
+ mov sl, r2
+ #else
+ /* Still assumes 256bytes below SL. */
+ sub sl, r3, #64 << 10
+ #endif
+#endif
+
+ FN_RETURN
+ FN_EH_END
+
+
/*******************************************************************************
* Main library startup code.
*******************************************************************************/
.align 0
FUNC_START _mainCRTStartup
FUNC_START _start
-#if defined(__ELF__) && !defined(__USING_SJLJ_EXCEPTIONS__)
- /* Annotation for EABI unwinding tables. */
- .fnstart
-#endif
+ FN_EH_START
/* Start by setting up a stack. */
#ifdef ARM_RDP_MONITOR
@@ -124,42 +293,33 @@
.LC32:
ldr r1, [r0, #8]
ldr r2, [r0, #12]
- /* We skip setting sp/sl if 0 returned from semihosting.
+ /* We skip setting SP/SL if 0 returned from semihosting.
- According to semihosting docs, if 0 returned from semihosting,
the system was unable to calculate the real value, so it's ok
- to skip setting sp/sl to 0 here.
+ to skip setting SP/SL to 0 here.
- Considering M-profile processors, We might want to initialize
sp by the first entry of vector table and return 0 to SYS_HEAPINFO
- semihosting call, which will be skipped here. */
+ semihosting call, which will be skipped here.
+ - Considering R-profile processors there is no automatic SP init by hardware
+ so we need to initialize it by default value. */
+ ldr r3, .Lstack
cmp r1, #0
beq .LC26
- mov sp, r1
+ mov r3, r1
.LC26:
- cmp r2, #0
- beq .LC27
+ mov sp, r3
- /* Allow slop for stack overflow handling and small frames. */
-#ifdef THUMB1_ONLY
- adds r2, #128
- adds r2, #128
- mov sl, r2
-#else
- add sl, r2, #256
-#endif
+ /* r2 (SL value) will be used in _stack_init. */
+ bl FUNCTION (_stack_init)
-.LC27:
-#else
- /* Set up the stack pointer to a fixed value. */
+
+#else /* standalone */
+ /* Set up the stack pointer to a fixed value. */
/* Changes by toralf:
- Allow linker script to provide stack via __stack symbol - see
defintion of .Lstack
- Provide "hooks" that may be used by the application to add
- custom init code - see .Lhwinit and .Lswinit
- - Go through all execution modes and set up stack for each of them.
- Loosely based on init.s from ARM/Motorola example code.
- Note: Mode switch via CPSR is not allowed once in non-privileged
- mode, so we take care not to enter "User" to set up its sp,
- and also skip most operations if already in that mode. */
+ custom init code - see .Lhwinit and .Lswinit. */
ldr r3, .Lstack
cmp r3, #0
@@ -178,57 +338,10 @@
have somehow missed it below (in which case it gets the same
value as FIQ - not ideal, but better than nothing). */
mov sp, r3
-#ifdef PREFER_THUMB
- /* XXX Fill in stack assignments for interrupt modes. */
-#else
- mrs r2, CPSR
- tst r2, #0x0F /* Test mode bits - in User of all are 0. */
- beq .LC23 /* "eq" means r2 AND #0x0F is 0. */
- msr CPSR_c, #0xD1 /* FIRQ mode, interrupts disabled. */
- mov sp, r3
- sub sl, sp, #0x1000 /* This mode also has its own sl (see below). */
-
- mov r3, sl
- msr CPSR_c, #0xD7 /* Abort mode, interrupts disabled. */
- mov sp, r3
- sub r3, r3, #0x1000
-
- msr CPSR_c, #0xDB /* Undefined mode, interrupts disabled. */
- mov sp, r3
- sub r3, r3, #0x1000
-
- msr CPSR_c, #0xD2 /* IRQ mode, interrupts disabled. */
- mov sp, r3
- sub r3, r3, #0x2000
-
- msr CPSR_c, #0xD3 /* Supervisory mode, interrupts disabled. */
- mov sp, r3
- sub r3, r3, #0x8000 /* Min size 32k. */
- bic r3, r3, #0x00FF /* Align with current 64k block. */
- bic r3, r3, #0xFF00
+ /* We don't care of r2 value in standalone. */
+ bl FUNCTION (_stack_init)
- str r3, [r3, #-4] /* Move value into user mode sp without */
- ldmdb r3, {sp}^ /* changing modes, via '^' form of ldm. */
- orr r2, r2, #0xC0 /* Back to original mode, presumably SVC, */
- msr CPSR_c, r2 /* with FIQ/IRQ disable bits forced to 1. */
-#endif
-.LC23:
- /* Setup a default stack-limit in-case the code has been
- compiled with "-mapcs-stack-check". Hard-wiring this value
- is not ideal, since there is currently no support for
- checking that the heap and stack have not collided, or that
- this default 64k is enough for the program being executed.
- However, it ensures that this simple crt0 world will not
- immediately cause an overflow event: */
-#ifdef THUMB1_ONLY
- movs r2, #64
- lsls r2, r2, #10
- subs r2, r3, r2
- mov sl, r2
-#else
- sub sl, r3, #64 << 10 /* Still assumes 256bytes below sl. */
-#endif
#endif
#endif
/* Zero the memory in the .bss section. */
@@ -421,6 +534,8 @@ change_back:
swi SWI_Exit
#endif
+ FN_EH_END
+
/* For Thumb, constants must be after the code since only
positive offsets are supported for PC relative addresses. */
.align 0
@@ -438,9 +553,6 @@ change_back:
#else
.word 0x80000 /* Top of RAM on the PIE board. */
#endif
-
-.Lstack:
- .word __stack
.Lhwinit:
.word FUNCTION (hardware_init_hook)
.Lswinit:
@@ -453,17 +565,16 @@ change_back:
and only if, a normal version of the same symbol isn't provided
e.g. by a linker script or another object file.) */
- .weak __stack
.weak FUNCTION (hardware_init_hook)
.weak FUNCTION (software_init_hook)
#endif
#endif
-#if defined(__ELF__) && !defined(__USING_SJLJ_EXCEPTIONS__)
- /* Protect against unhandled exceptions. */
- .cantunwind
- .fnend
-#endif
+
+.Lstack:
+ .word __stack
+ .weak __stack
+
.LC1:
.word __bss_start__
.LC2:
From: Alexander Fedotov <alfedotov@gmail.com> SP initialization changes: 1. set default value in semihosting case as well 2. moved existing SP & SL init code for processor modes in separate routine and made it as "hook" 3. init SP for processor modes in Thumb mode as well Add new macro FN_RETURN, FN_EH_START and FN_EH_END. --- libgloss/arm/arm.h | 26 ++++ libgloss/arm/crt0.S | 281 ++++++++++++++++++++++++++----------- newlib/libc/sys/arm/arm.h | 26 ++++ newlib/libc/sys/arm/crt0.S | 281 ++++++++++++++++++++++++++----------- 4 files changed, 444 insertions(+), 170 deletions(-) -- 2.17.1