diff mbox series

[net-next,3/4] net: dsa: b53: Improve flow control setup on BCM5301x

Message ID 20210916120354.20338-4-zajec5@gmail.com
State New
Headers show
Series [net-next,1/4] net: dsa: b53: Include all ports in "enabled_ports" | expand

Commit Message

Rafał Miłecki Sept. 16, 2021, 12:03 p.m. UTC 
From: Rafał Miłecki <rafal@milecki.pl>

According to the Broadcom's reference driver flow control needs to be
enabled for any CPU switch port (5, 7 or 8 - depending on which one is
used). Current code makes it work only for the port 5. Use
dsa_is_cpu_port() which solved that problem.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
 drivers/net/dsa/b53/b53_common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index ca84e32baca0..13f337a102ba 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1222,7 +1222,7 @@  static void b53_adjust_link(struct dsa_switch *ds, int port,
 		return;
 
 	/* Enable flow control on BCM5301x's CPU port */
-	if (is5301x(dev) && port == dev->cpu_port)
+	if (is5301x(dev) && dsa_is_cpu_port(ds, port))
 		tx_pause = rx_pause = true;
 
 	if (phydev->pause) {