@@ -1119,8 +1119,14 @@ static int ksz8_port_vlan_filtering(struct dsa_switch *ds, int port, bool flag,
if (ksz_is_ksz88x3(dev))
return -ENOTSUPP;
+ /* Discard packets with VID not enabled on the switch */
ksz_cfg(dev, S_MIRROR_CTRL, SW_VLAN_ENABLE, flag);
+ /* Discard packets with VID not enabled on the ingress port */
+ for (port = 0; port < dev->phy_port_cnt; ++port)
+ ksz_port_cfg(dev, port, REG_PORT_CTRL_2, PORT_INGRESS_FILTER,
+ flag);
+
return 0;
}
@@ -1774,6 +1780,11 @@ static int ksz8_switch_init(struct ksz_device *dev)
*/
dev->ds->untag_bridge_pvid = true;
+ /* VLAN filtering is partly controlled by the global VLAN
+ * Enable flag
+ */
+ dev->ds->vlan_filtering_is_global = true;
+
return 0;
}
Currently ksz8_port_vlan_filtering() sets or clears the VLAN Enable hardware flag. That controls discarding of packets with a VID that has not been enabled for any port on the switch. Since it is a global flag, set the dsa_switch::vlan_filtering_is_global flag so that the DSA core understands this can't be controlled per port. When VLAN filtering is enabled, the switch should also discard packets with a VID that's not enabled on the ingress port. Set or clear each external port's VLAN Ingress Filter flag in ksz8_port_vlan_filtering() to make that happen. Fixes: e66f840c08a2 ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver") Signed-off-by: Ben Hutchings <ben.hutchings@mind.be> --- drivers/net/dsa/microchip/ksz8795.c | 11 +++++++++++ 1 file changed, 11 insertions(+)