diff mbox series

[net-next,v5,3/8] net: phy: micrel: use consistent alignments

Message ID 20210614043125.11658-4-o.rempel@pengutronix.de
State New
Headers show
Series [net-next,v5,1/8] net: phy: micrel: move phy reg offsets to common header | expand

Commit Message

Oleksij Rempel June 14, 2021, 4:31 a.m. UTC 
This patch changes the alignments to one space between "#define" and the
macro.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/phy/micrel.c | 44 ++++++++++++++++++++--------------------
 1 file changed, 22 insertions(+), 22 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index a14a00328fa3..77640b990977 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -38,42 +38,42 @@ 
 
 /* general Interrupt control/status reg in vendor specific block. */
 #define MII_KSZPHY_INTCS			0x1B
-#define	KSZPHY_INTCS_JABBER			BIT(15)
-#define	KSZPHY_INTCS_RECEIVE_ERR		BIT(14)
-#define	KSZPHY_INTCS_PAGE_RECEIVE		BIT(13)
-#define	KSZPHY_INTCS_PARELLEL			BIT(12)
-#define	KSZPHY_INTCS_LINK_PARTNER_ACK		BIT(11)
-#define	KSZPHY_INTCS_LINK_DOWN			BIT(10)
-#define	KSZPHY_INTCS_REMOTE_FAULT		BIT(9)
-#define	KSZPHY_INTCS_LINK_UP			BIT(8)
-#define	KSZPHY_INTCS_ALL			(KSZPHY_INTCS_LINK_UP |\
+#define KSZPHY_INTCS_JABBER			BIT(15)
+#define KSZPHY_INTCS_RECEIVE_ERR		BIT(14)
+#define KSZPHY_INTCS_PAGE_RECEIVE		BIT(13)
+#define KSZPHY_INTCS_PARELLEL			BIT(12)
+#define KSZPHY_INTCS_LINK_PARTNER_ACK		BIT(11)
+#define KSZPHY_INTCS_LINK_DOWN			BIT(10)
+#define KSZPHY_INTCS_REMOTE_FAULT		BIT(9)
+#define KSZPHY_INTCS_LINK_UP			BIT(8)
+#define KSZPHY_INTCS_ALL			(KSZPHY_INTCS_LINK_UP |\
 						KSZPHY_INTCS_LINK_DOWN)
-#define	KSZPHY_INTCS_LINK_DOWN_STATUS		BIT(2)
-#define	KSZPHY_INTCS_LINK_UP_STATUS		BIT(0)
-#define	KSZPHY_INTCS_STATUS			(KSZPHY_INTCS_LINK_DOWN_STATUS |\
+#define KSZPHY_INTCS_LINK_DOWN_STATUS		BIT(2)
+#define KSZPHY_INTCS_LINK_UP_STATUS		BIT(0)
+#define KSZPHY_INTCS_STATUS			(KSZPHY_INTCS_LINK_DOWN_STATUS |\
 						 KSZPHY_INTCS_LINK_UP_STATUS)
 
 /* PHY Control 1 */
-#define	MII_KSZPHY_CTRL_1			0x1e
+#define MII_KSZPHY_CTRL_1			0x1e
 
 /* PHY Control 2 / PHY Control (if no PHY Control 1) */
-#define	MII_KSZPHY_CTRL_2			0x1f
-#define	MII_KSZPHY_CTRL				MII_KSZPHY_CTRL_2
+#define MII_KSZPHY_CTRL_2			0x1f
+#define MII_KSZPHY_CTRL				MII_KSZPHY_CTRL_2
 /* bitmap of PHY register to set interrupt mode */
 #define KSZPHY_CTRL_INT_ACTIVE_HIGH		BIT(9)
 #define KSZPHY_RMII_REF_CLK_SEL			BIT(7)
 
 /* Write/read to/from extended registers */
-#define MII_KSZPHY_EXTREG                       0x0b
-#define KSZPHY_EXTREG_WRITE                     0x8000
+#define MII_KSZPHY_EXTREG			0x0b
+#define KSZPHY_EXTREG_WRITE			0x8000
 
-#define MII_KSZPHY_EXTREG_WRITE                 0x0c
-#define MII_KSZPHY_EXTREG_READ                  0x0d
+#define MII_KSZPHY_EXTREG_WRITE			0x0c
+#define MII_KSZPHY_EXTREG_READ			0x0d
 
 /* Extended registers */
-#define MII_KSZPHY_CLK_CONTROL_PAD_SKEW         0x104
-#define MII_KSZPHY_RX_DATA_PAD_SKEW             0x105
-#define MII_KSZPHY_TX_DATA_PAD_SKEW             0x106
+#define MII_KSZPHY_CLK_CONTROL_PAD_SKEW		0x104
+#define MII_KSZPHY_RX_DATA_PAD_SKEW		0x105
+#define MII_KSZPHY_TX_DATA_PAD_SKEW		0x106
 
 #define PS_TO_REG				200