@@ -13209,6 +13209,7 @@ M: Vladimir Oltean <olteanv@gmail.com>
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/net/dsa/sja1105
+F: drivers/net/pcs/pcs-xpcs-nxp.c
NXP TDA998X DRM DRIVER
M: Russell King <linux@armlinux.org.uk>
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
# Makefile for Linux PCS drivers
-obj-$(CONFIG_PCS_XPCS) += pcs-xpcs.o
+obj-$(CONFIG_PCS_XPCS) += pcs-xpcs.o pcs-xpcs-nxp.o
obj-$(CONFIG_PCS_LYNX) += pcs-lynx.o
new file mode 100644
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright 2021 NXP Semiconductors
+ */
+#include <linux/pcs/pcs-xpcs.h>
+#include "pcs-xpcs.h"
+
+/* In NXP SJA1105, the PCS is integrated with a PMA that has the TX lane
+ * polarity inverted by default (PLUS is MINUS, MINUS is PLUS). To obtain
+ * normal non-inverted behavior, the TX lane polarity must be inverted in the
+ * PCS, via the DIGITAL_CONTROL_2 register.
+ */
+int nxp_sja1105_sgmii_pma_config(struct dw_xpcs *xpcs)
+{
+ return xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_DIG_CTRL2,
+ DW_VR_MII_DIG_CTRL2_TX_POL_INV);
+}
@@ -117,6 +117,7 @@ struct xpcs_compat {
const phy_interface_t *interface;
int num_interfaces;
int an_mode;
+ int (*pma_config)(struct dw_xpcs *xpcs);
};
struct xpcs_id {
@@ -168,7 +169,7 @@ static bool __xpcs_linkmode_supported(const struct xpcs_compat *compat,
#define xpcs_linkmode_supported(compat, mode) \
__xpcs_linkmode_supported(compat, ETHTOOL_LINK_MODE_ ## mode ## _BIT)
-static int xpcs_read(struct dw_xpcs *xpcs, int dev, u32 reg)
+int xpcs_read(struct dw_xpcs *xpcs, int dev, u32 reg)
{
u32 reg_addr = mdiobus_c45_addr(dev, reg);
struct mii_bus *bus = xpcs->mdiodev->bus;
@@ -177,7 +178,7 @@ static int xpcs_read(struct dw_xpcs *xpcs, int dev, u32 reg)
return mdiobus_read(bus, addr, reg_addr);
}
-static int xpcs_write(struct dw_xpcs *xpcs, int dev, u32 reg, u16 val)
+int xpcs_write(struct dw_xpcs *xpcs, int dev, u32 reg, u16 val)
{
u32 reg_addr = mdiobus_c45_addr(dev, reg);
struct mii_bus *bus = xpcs->mdiodev->bus;
@@ -788,6 +789,12 @@ static int xpcs_do_config(struct dw_xpcs *xpcs, phy_interface_t interface,
return -1;
}
+ if (compat->pma_config) {
+ ret = compat->pma_config(xpcs);
+ if (ret)
+ return ret;
+ }
+
return 0;
}
@@ -1022,11 +1029,25 @@ static const struct xpcs_compat synopsys_xpcs_compat[DW_XPCS_INTERFACE_MAX] = {
},
};
+static const struct xpcs_compat nxp_sja1105_xpcs_compat[DW_XPCS_INTERFACE_MAX] = {
+ [DW_XPCS_SGMII] = {
+ .supported = xpcs_sgmii_features,
+ .interface = xpcs_sgmii_interfaces,
+ .num_interfaces = ARRAY_SIZE(xpcs_sgmii_interfaces),
+ .an_mode = DW_AN_C37_SGMII,
+ .pma_config = nxp_sja1105_sgmii_pma_config,
+ },
+};
+
static const struct xpcs_id xpcs_id_list[] = {
{
.id = SYNOPSYS_XPCS_ID,
.mask = SYNOPSYS_XPCS_MASK,
.compat = synopsys_xpcs_compat,
+ }, {
+ .id = NXP_SJA1105_XPCS_ID,
+ .mask = SYNOPSYS_XPCS_MASK,
+ .compat = nxp_sja1105_xpcs_compat,
},
};
@@ -60,10 +60,15 @@
/* EEE Mode Control Register */
#define DW_VR_MII_EEE_MCTRL0 0x8006
#define DW_VR_MII_EEE_MCTRL1 0x800b
+#define DW_VR_MII_DIG_CTRL2 0x80e1
/* VR_MII_DIG_CTRL1 */
#define DW_VR_MII_DIG_CTRL1_MAC_AUTO_SW BIT(9)
+/* VR_MII_DIG_CTRL2 */
+#define DW_VR_MII_DIG_CTRL2_TX_POL_INV BIT(4)
+#define DW_VR_MII_DIG_CTRL2_RX_POL_INV BIT(0)
+
/* VR_MII_AN_CTRL */
#define DW_VR_MII_AN_CTRL_TX_CONFIG_SHIFT 3
#define DW_VR_MII_TX_CONFIG_MASK BIT(3)
@@ -101,3 +106,8 @@
/* VR MII EEE Control 1 defines */
#define DW_VR_MII_EEE_TRN_LPI BIT(0) /* Transparent Mode Enable */
+
+int xpcs_read(struct dw_xpcs *xpcs, int dev, u32 reg);
+int xpcs_write(struct dw_xpcs *xpcs, int dev, u32 reg, u16 val);
+
+int nxp_sja1105_sgmii_pma_config(struct dw_xpcs *xpcs);
@@ -10,6 +10,8 @@
#include <linux/phy.h>
#include <linux/phylink.h>
+#define NXP_SJA1105_XPCS_ID 0x00000010
+
/* AN mode */
#define DW_AN_C73 1
#define DW_AN_C37_SGMII 2