diff mbox series

[RFC,net-next,v5,01/25] net: dsa: qca8k: change simple print to dev variant

Message ID 20210511020500.17269-2-ansuelsmth@gmail.com
State Superseded
Headers show
Series [RFC,net-next,v5,01/25] net: dsa: qca8k: change simple print to dev variant | expand

Commit Message

Christian Marangi May 11, 2021, 2:04 a.m. UTC 
Change pr_err and pr_warn to dev variant.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/qca8k.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Andrew Lunn May 14, 2021, 4:35 p.m. UTC | #1 
On Tue, May 11, 2021 at 04:04:36AM +0200, Ansuel Smith wrote:
> Change pr_err and pr_warn to dev variant.
> 
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
diff mbox series

Patch

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index cdaf9f85a2cb..0b295da6c356 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -701,7 +701,7 @@  qca8k_setup(struct dsa_switch *ds)
 
 	/* Make sure that port 0 is the cpu port */
 	if (!dsa_is_cpu_port(ds, 0)) {
-		pr_err("port 0 is not the CPU port\n");
+		dev_err(priv->dev, "port 0 is not the CPU port");
 		return -EINVAL;
 	}
 
@@ -711,7 +711,7 @@  qca8k_setup(struct dsa_switch *ds)
 	priv->regmap = devm_regmap_init(ds->dev, NULL, priv,
 					&qca8k_regmap_config);
 	if (IS_ERR(priv->regmap))
-		pr_warn("regmap initialization failed");
+		dev_warn(priv->dev, "regmap initialization failed");
 
 	ret = qca8k_setup_mdio_bus(priv);
 	if (ret)