@@ -639,8 +639,14 @@ qca8k_mdio_write(struct qca8k_priv *priv, int port, u32 regnum, u16 data)
if (ret)
return ret;
- return qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
- QCA8K_MDIO_MASTER_BUSY);
+ ret = qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
+ QCA8K_MDIO_MASTER_BUSY);
+
+ /* even if the busy_wait timeouts try to clear the MASTER_EN */
+ qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL,
+ QCA8K_MDIO_MASTER_EN);
+
+ return ret;
}
static int
@@ -674,6 +680,10 @@ qca8k_mdio_read(struct qca8k_priv *priv, int port, u32 regnum)
val &= QCA8K_MDIO_MASTER_DATA_MASK;
+ /* even if the busy_wait timeouts try to clear the MASTER_EN */
+ qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL,
+ QCA8K_MDIO_MASTER_EN);
+
return val;
}
Clear MDIO_MASTER_EN bit from MDIO_MASTER_CTRL after read/write operation. The MDIO_MASTER_EN bit is not reset after read/write operation and the next operation can be wrongly interpreted by the switch as a mdio operation. This cause a production of wrong/garbage data from the switch and underfined bheavior. (random port drop, unplugged port flagged with link up, wrong port speed) Also on driver remove the MASTER_CTRL can be left set and cause the malfunction of any next driver using the mdio device. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> --- drivers/net/dsa/qca8k.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-)