diff mbox series

[net-next,1/5] dpaa2-switch: fix the translation between the bridge and dpsw STP states

Message ID 20210330145419.381355-2-ciorneiioana@gmail.com
State New
Headers show
Series dpaa2-switch: add STP support | expand

Commit Message

Ioana Ciornei March 30, 2021, 2:54 p.m. UTC 
From: Ioana Ciornei <ioana.ciornei@nxp.com>

The numerical values used for STP states are different between the
bridge and the MC ABI therefore, the direct usage of the
BR_STATE_* macros directly in the structures passed to the firmware is
incorrect.

Create a separate function that translates between the bridge STP states
and the enum that holds the STP state as seen by the Management Complex.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
---
 .../ethernet/freescale/dpaa2/dpaa2-switch.c   | 23 ++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
index a9b30a72ddad..073316d0a77c 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
@@ -318,17 +318,34 @@  static int dpaa2_switch_port_add_vlan(struct ethsw_port_priv *port_priv,
 	return 0;
 }
 
+static enum dpsw_stp_state br_stp_state_to_dpsw(u8 state)
+{
+	switch (state) {
+	case BR_STATE_DISABLED:
+		return DPSW_STP_STATE_DISABLED;
+	case BR_STATE_LISTENING:
+		return DPSW_STP_STATE_LISTENING;
+	case BR_STATE_LEARNING:
+		return DPSW_STP_STATE_LEARNING;
+	case BR_STATE_FORWARDING:
+		return DPSW_STP_STATE_FORWARDING;
+	case BR_STATE_BLOCKING:
+		return DPSW_STP_STATE_BLOCKING;
+	default:
+		return DPSW_STP_STATE_DISABLED;
+	}
+}
+
 static int dpaa2_switch_port_set_stp_state(struct ethsw_port_priv *port_priv, u8 state)
 {
-	struct dpsw_stp_cfg stp_cfg = {
-		.state = state,
-	};
+	struct dpsw_stp_cfg stp_cfg = {0};
 	int err;
 	u16 vid;
 
 	if (!netif_running(port_priv->netdev) || state == port_priv->stp_state)
 		return 0;	/* Nothing to do */
 
+	stp_cfg.state = br_stp_state_to_dpsw(state);
 	for (vid = 0; vid <= VLAN_VID_MASK; vid++) {
 		if (port_priv->vlans[vid] & ETHSW_VLAN_MEMBER) {
 			stp_cfg.vlan_id = vid;