@@ -68,32 +68,11 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8609, ventana_pciesw_early_fixup);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8606, ventana_pciesw_early_fixup);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8604, ventana_pciesw_early_fixup);
-static int ar8035_phy_fixup(struct phy_device *dev)
-{
- u16 val;
-
- /* Ar803x phy SmartEEE feature cause link status generates glitch,
- * which cause ethernet link down/up issue, so disable SmartEEE
- */
- phy_write(dev, 0xd, 0x3);
- phy_write(dev, 0xe, 0x805d);
- phy_write(dev, 0xd, 0x4003);
-
- val = phy_read(dev, 0xe);
- phy_write(dev, 0xe, val & ~(1 << 8));
-
- return 0;
-}
-
-#define PHY_ID_AR8035 0x004dd072
-
static void __init imx6q_enet_phy_init(void)
{
if (IS_BUILTIN(CONFIG_PHYLIB)) {
phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
ksz9021rn_phy_fixup);
- phy_register_fixup_for_uid(PHY_ID_AR8035, 0xffffffef,
- ar8035_phy_fixup);
}
}
This fixup removes the Lpi_en bit. If this patch breaks functionality of your board, use following device tree properties: qca,smarteee-tw-us-1g and qca,smarteee-tw-us-100m. For example: ethernet-phy@X { reg = <0xX>; qca,smarteee-tw-us-1g = <24>; .... }; Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- arch/arm/mach-imx/mach-imx6q.c | 21 --------------------- 1 file changed, 21 deletions(-)